Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 1982 Dodge Aries, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
THE BRAKE HYDRAULIC SYSTEM BAY BE EQUIPPED WITH BRAKE FLUID CONTAINING AN EXCESS OF WATER. Remedy: DEALER WILL REPLACE DEFECTIVE BRAKE FLUID WITHOUT CHARGE TO OWNER.
CLAMP BOLTS INSTALLED ON CERTAIN VEHICLES MAY CONTAIN CRACKS. EVENTUALLY THESE BOLTS MAY BREAK THROUGH, CAUSING SEPARATION OF THE BALL JOINT FROM THE STEERING KNUCKLE. Remedy: DEALER WILL REPLACE BOTH BALL JOINT STUD CLAMP BOLTS WITHOUT CHARGE TO OWNER.
FRONT SUSPENSION CROSSMEMBER MAY CORRODE AND FAIL AT LOWER CONTROL ARM REAR PIVOT MOUNTS IF OPERATED WHERE SALT IS USED TO AID IN SNOW REMOVAL. Remedy: INSTALL ATTACHMENT REINFORCEMENT BRACKETS TO PREVENT CONTROL ARM DETACHMENT AS A RESULT OF CORROSION WEAKENING.
THE AUTOMATIC SPEED CONTROL SWITCH MAY STICK IN THE "RESUME" POSITION RESTRICTING RETURN MOVEMENT. THIS WILL NOT ALLOW THE NORMAL BRAKE PEDAL OPERATION TO DEACTIVATE THE SYSTEM. Remedy: THE SHIELD PORTION OF THE "RESUME" SLIDE LEVER IN THE SPEED CONTROL UNIT WILL BE REPLACED WITHOUT CHARGE.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
VEHICLES EQUIPPED WITH 2.2 LITRE PROPANE FUELLED ENGINES MAY EXPERIENCE CORROSION OF THE FILL AND OUTAGE (80% FILL LEVEL) FITTINGS AT THE FILL VALVE. IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE OR EXPLOSION COULD RESULT. CORRECTION: SUSPECT VEHICLES WILL HAVE THE FILL AND OUTAGE HOSES REPLACED, AN IMPROVED SHIELD AND RUSTPROOFING APPLIED TO THE FITTINGS.
On certain vehicles, the crossmember can become abnormally corroded at the lower control arm attachment. This could result in lower control arm separation and loss of vehicle control. Correction: crossmembers will be inspected and replaced if corrosion is excessive. Remainder will have crossmember retaining brackets installed.
INVOLVED VEHICLES MAY HAVE BEEN BUILT WITH IMPROPERLY FORGED OR HEAT TREATED BOLTS USED TO ATTACH THE FRONT SUSPENSION BALL JOINTS TO THE STEERING KNUCKLES. SOME OF THE BOLTS MAY EVENTUALLY FAIL WHICH COULD RESULT IN BALL JOINT SEPARATION AND AFFECT VEHICLE DIRECTIONAL CONTROLLABILITY.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain