Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 1984 Plymouth Voyager, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
FEDERAL MOGUL IS RECALLING 6,903 AFTERMARKET BALL JOINT ASSEMBLIES SHIPPED BETWEEN NOVEMBER 9, 2007 AND MARCH 26, 2008, WHICH MAY HAVE BEEN PACKAGED WITH INCORRECT NUTS. THE PART NUMBERS PACKAGED WITH INCORRECT NUTS ARE: K7147, K7329, K8683, AND 104353. THESE PARTS WERE MADE FOR USE ON THE VARIOUS VEHICLES LISTED ABOVE. Remedy: FEDERAL MOGUL WILL NOTIFY OWNERS AND REPLACE THE PARTS FREE OF CHARGE. THE RECALL BEGAN ON MAY 22, 2008. OWNERS CAN CONTACT FEDERAL MOGUL AT 877-489-6659.
VEHICLE DESCRIPTION: LIGHT DUTY PASSENGER MINIVANS WITH REMOTE RELEASE. THIS IS NOT A SAFETY RECALL. THERE HAS BEEN NO DETERMINATION THAT A SAFETY DEFECT EXISTS WITH THE MINIVAN LATCHES. CHRYSLER IS CONDUCTING A SERVICE CAMPAIGN TO REPLACE THE LIFTGATE LATCH ASSEMBLY OF THE AFFECTED MINIVANS. IN A COLLISION, THE REAR LIFTGATE LATCH ASSEMBLY COULD OPEN. Remedy: CHRYSLER DEALERS WILL REPLACE THE LIFTGATE LATCH WITH A NEW STRONGER LATCH ASSEMBLY WITHOUT CHARGE. CHRYSLER BEGAN NOTIFYING OWNERS OF THESE VEHICLES DURING JULY 1996.
VEHICLE DESCRIPTION: LIGHT DUTY PASSENGER MINIVANS WITHOUT REMOTE RELEASE. THIS IS NOT A SAFETY RECALL. THERE HAS BEEN NO DETERMINATION THAT A SAFETY DEFECT EXISTS WITH THE MINIVAN LATCHES. CHRYSLER IS CONDUCTING A SERVICE CAMPAIGN TO REPLACE THE LIFTGATE LATCH ASSEMBLY OF THE AFFECTED MINIVANS. IN A COLLISION, THE REAR LIFTGATE LATCH ASSEMBLY COULD OPEN. Remedy: CHRYSLER DEALERS WILL REPLACE THE LIFTGATE LATCH WITH A NEW STRONGER LATCH ASSEMBLY WITHOUT CHARGE. CHRYSLER BEGAN NOTIFYING OWNERS DURING NOVEMBER 1995.
VANS EQUIPPED WITH THE OPTIONAL SUNSCREEN REAR GLASS WHICH HAS LESS THAN 70 PERCENT LUMINOUS TRANSMITTANCE AND DOES NOT HAVE A PASSENGER SIDE OUTSIDE REARVIEW MIRROR ARE NOT IN COMPLIANCE WITH FMVSS 111, REAR VIEW MIRRORS. CONSEQUENCE OF DEFECT: THE DRIVERS OF THESE VANS DO NOT HAVE THE MINIMUM FIELD OF VISION REQUIRED BY FMVSS 111. WITHOUT THIS MINIMUM FIELD OF VISION THE DRIVER CANNOT MANEUVER HIS VEHICLE SAFELY AND MAY CAUSE AN ACCIDENT. Remedy: INSTALL PASSENGER SIDE OUTSIDE REARVIEW MIRROR.
ROADWAY STONES MAY BECOME LODGED IN THE HEIGHT SENSING BRAKE PROPORTIONING VALVE. THIS MAY CAUSE THE PROPORTIONING VALVE TO FAIL. CONSEQUENCE OF DEFECT: PROPORTIONING VALVE MALFUNCTION RESULTS IN INCREASED STOPPING DISTANCES DURING HARD BRAKING WITH A LIGHT LOAD AND MAY CAUSE AN ACCIDENT. Remedy: CLEAR PROPORTIONING VALVE OF STONES AND INSTALL A PROTECTIVE COVER TO PREVENT STONES FROM ENTERING.
THE METAL FUEL SUPPLY TUBE MAY CRACK AT THE FUEL PUMP END DUE TO VIBRATION. THE CRACK MAY RESULT IN FUEL LEAKAGE. (THE FUEL SUPPLY TUBE CONNECTS THE FUEL PUMP TO THE FUEL FILTER.) Remedy: A FUEL TUBE RETAINING CLIP ASSEMBLY WILL BE INSTALLED ON ALL INVOLVED VEHICLES, FREE OF CHARGE. THIS WILL RESTRICT TUBE VIBRATION AND PREVENT CRACKS.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Certain vehicles do not comply with CMVSS 111 - rearview mirrors.
On certain vehicles, stones could become lodged in the height sensing brake proportioning valve. Inhibited valve function, due to stone intrusion, may result in increased stopping distances during severe braking with light loads.
THE FUEL SUPPLY TUBE FROM THE FUEL PUMP TO THE FUEL FILTER COULD EXPERIENCE FATIGUE CRACKING AT THE FUEL PUMP END AS THE RESULT OF RESONANT VIBRATION DURING VEHICLE OPERATION. THIS COULD RESULT IN FUEL LEAKAGE AND PRESENT THE POTENTIAL FOR FIRE.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain