Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 1985 Dodge 600, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
FEDERAL MOGUL IS RECALLING 6,903 AFTERMARKET BALL JOINT ASSEMBLIES SHIPPED BETWEEN NOVEMBER 9, 2007 AND MARCH 26, 2008, WHICH MAY HAVE BEEN PACKAGED WITH INCORRECT NUTS. THE PART NUMBERS PACKAGED WITH INCORRECT NUTS ARE: K7147, K7329, K8683, AND 104353. THESE PARTS WERE MADE FOR USE ON THE VARIOUS VEHICLES LISTED ABOVE. Remedy: FEDERAL MOGUL WILL NOTIFY OWNERS AND REPLACE THE PARTS FREE OF CHARGE. THE RECALL BEGAN ON MAY 22, 2008. OWNERS CAN CONTACT FEDERAL MOGUL AT 877-489-6659.
A SERVICE REPLACEMENT DRIVERS SEAT CUSHION (MANUAL SEAT TYPE) MAY CONTAIN WRONG CUSHION WITH A BRACE THAT COULD INTERFERE WITH POWER SEAT ADJUSTER MECHANISM AND CAUSE STRESS ON THE FRAME. Remedy: REPLACE FRAME WITH PROPER POWER SEAT FRAME.
AN ENGINE COMPARTMENT FUEL HOSE ROUTED TO THE FUEL SYSTEM PRESSURE REGULATOR MAY HAVE AN INADEQUATELY TIGHTENED HOSE CLAMP. CONSEQUENCE OF DEFECT: THE FUEL HOSE COULD LEAK AND RESULT IN AN ENGINE COMPARTMENT FIRE. Remedy: REPOSITION AND TIGHTEN TO THE PROPER TORQUE LEVEL OF THE FUEL HOSE CLAMP.
FUEL LEAKAGE MAY OCCUR IN LOW AMBIENT TEMPERATURE OPERATION AT CONNECTIONS OF AN ENGINE COMPARTMENT FUEL SUPPLY HOSE TO THE PRESSURE REGULATOR AND TO THE FUEL RAIL. Remedy: RELOCATE PRESSURE REGULATOR; REPLACE FUEL SUPPLY WITH FORMED HOSE WITH REVISED ROUTING CONFIGURATION TO ENSURE SEALING INTEGRITY.
DRIVERS SEAT FRAME MAY EXPERIENCE FATIGUE FAILURE AT ONE (FRONT/OUTBOARD) OF ITS FOUR ATTACHMENTS. Remedy: REPLACE DRIVERS SEAT FRAME WITH A STRENGHTENED VERSION; ALSO, REINFORCE POWER ADJUSTER FRONT CROSSMEMBER TO INCREASE RIGIDITY OF SEAT ATTACHMENT SYSTEM.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
ON VEHICLES WITH POWER ADJUSTED BUCKET SEATS, THE DRIVER'S SEAT FRAME MAY FAIL AT ONE OF ITS FOUR ATTACHMENTS. THIS CAN RESULT IN FORE/AFT OR LATERAL MOVEMENT OF THE SEAT. THIS COULD CAUSE LOSS OF VEHICLE CONTROL AND A POSSIBLE VEHICLE CRASH. CORRECTION: THE DRIVER'S SEAT FRAME WILL BE REPLACED WITH A STRENGTHENED VERSION. ALSO, THE POWER ADJUSTER CROSSMEMBER WILL BE REINFORCED.
VEHICLES EQUIPPED WITH POWER SEATS THAT HAVE HAD A SEAT CUSHION FRAME REPLACEMENT IN THE FIELD COULD EXPERIENCE CUSHION FRAME FAILURE RESULTING IN SIGNIFICANT REARWARD MOVEMENT OF THE SEAT BACK. THIS COULD RESULT IN LOSS OF VEHICLE CONTROL AND A POSSIBLE CRASH. CORRECTION: SEAT CUSHION FRAME WILL BE INSPECTED AND REPLACED IF REQUIRED.
On certain vehicles with 2.2 Litre turbo-charged multi-port fuel injection engines, there is a possibility that fuel leakage may occur during low ambient temperature operation at the fuel hose used to interconnect the fuel pressure regulator and the injector rail. Fuel leakage would create the potential for an engine compartment fire. Correction: the pressure regulator will be relocated and the fuel supply hose will replaced with a formed hose having a revised routing configuration.
THESE VEHICLES DO NOT COMPLY WITH C.M.V.S.S. 1103 - EXHAUST EMISSIONS. PLUGGED CHOKE VACUUM DELAY VALVE. NOTE: VEHICLES EQUIPPED WITH 2.2 LITRE CARBURETED ENGINES.
On certain vehicles equipped with a 2.2 Litre turbo engine, an inadequately tightened fuel hose clamp at the fuel system pressure regulator could result in fuel leakage and provide the potential for an engine compartment fire.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain