Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 1986 Chrysler NEW Yorker, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
FEDERAL MOGUL IS RECALLING 6,903 AFTERMARKET BALL JOINT ASSEMBLIES SHIPPED BETWEEN NOVEMBER 9, 2007 AND MARCH 26, 2008, WHICH MAY HAVE BEEN PACKAGED WITH INCORRECT NUTS. THE PART NUMBERS PACKAGED WITH INCORRECT NUTS ARE: K7147, K7329, K8683, AND 104353. THESE PARTS WERE MADE FOR USE ON THE VARIOUS VEHICLES LISTED ABOVE. Remedy: FEDERAL MOGUL WILL NOTIFY OWNERS AND REPLACE THE PARTS FREE OF CHARGE. THE RECALL BEGAN ON MAY 22, 2008. OWNERS CAN CONTACT FEDERAL MOGUL AT 877-489-6659.
A SERVICE REPLACEMENT DRIVERS SEAT CUSHION (MANUAL SEAT TYPE) MAY CONTAIN WRONG CUSHION WITH A BRACE THAT COULD INTERFERE WITH POWER SEAT ADJUSTER MECHANISM AND CAUSE STRESS ON THE FRAME. Remedy: REPLACE FRAME WITH PROPER POWER SEAT FRAME.
BATTERY CAP VENTS MAY BE PARTIALLY OR COMPLETELY BLOCKED WITH PLASTIC FLASHING. CONSEQUENCE OF DEFECT: A BUILD UP OF INTERNAL GAS PRESSURE COULD OCCUR WHICH COULD RESULT IN CASE RUPTURE, PARTICULARLY DURING POST CHARGING. SHOULD A PERSON BE IN THE VICINITY OF THE BATTERY WHEN THE CASE RUPTURES, THEY MAY BE INJURED BY THE RELEASED GASES AND/OR ACID. Remedy: REWORK BATTERIES BY PROBING BOTH VENT ORIFICES TO ELIMINATE ANY VENT OBSTRUCTION.
A RESISTOR IN THE ELECTRONIC PANEL CLUSTER MAY BE SUBJECTED TO AN ELECTRICAL CURRENT OVERLOAD DUE TO FAILURE OF A SWITCHING TRANSISTOR. CONSEQUENCE OF DEFECT: THE OVERHEATED RESISTOR COULD IGNITE AND START AN INSTRUMENT PANEL FIRE. Remedy: MODIFY INSTRUMENT PANEL CLUSTER BY REPLACING THE RESISTOR WITH A FUSED RESISTOR THAT WILL NOT IGNITE IF OVERLOADED.
FUEL LEAKAGE MAY OCCUR IN LOW AMBIENT TEMPERATURE OPERATION AT CONNECTIONS OF AN ENGINE COMPARTMENT FUEL SUPPLY HOSE TO THE PRESSURE REGULATOR AND TO THE FUEL RAIL. Remedy: RELOCATE PRESSURE REGULATOR; REPLACE FUEL SUPPLY WITH FORMED HOSE WITH REVISED ROUTING CONFIGURATION TO ENSURE SEALING INTEGRITY.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
VEHICLES EQUIPPED WITH POWER SEATS THAT HAVE HAD A SEAT CUSHION FRAME REPLACEMENT IN THE FIELD COULD EXPERIENCE CUSHION FRAME FAILURE RESULTING IN SIGNIFICANT REARWARD MOVEMENT OF THE SEAT BACK. THIS COULD RESULT IN LOSS OF VEHICLE CONTROL AND A POSSIBLE CRASH. CORRECTION: SEAT CUSHION FRAME WILL BE INSPECTED AND REPLACED IF REQUIRED.
On certain vehicles with 2.2 Litre turbo-charged multi-port fuel injection engines, there is a possibility that fuel leakage may occur during low ambient temperature operation at the fuel hose used to interconnect the fuel pressure regulator and the injector rail. Fuel leakage would create the potential for an engine compartment fire. Correction: the pressure regulator will be relocated and the fuel supply hose will replaced with a formed hose having a revised routing configuration.
THESE VEHICLES DO NOT COMPLY WITH C.M.V.S.S. 1103 - EXHAUST EMISSIONS. PLUGGED CHOKE VACUUM DELAY VALVE. NOTE: VEHICLES EQUIPPED WITH 2.2 LITRE CARBURETED ENGINES.
A RESISTER IN THE INSTRUMENT CLUSTER MAY BE SUBJECTED TO AN ELECTRICAL CURRENT OVERLOAD DUE TO FAILURE OF A SWITCHING TRANSISTER.THE OVERHEATED RESISTER COULD POSSIBLY START A FIRE IN THE INSTRUMENT PANEL.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain