Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 1992 Chevrolet Caprice, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
DOPE, INC. IS RECALLING 42,540 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS. Remedy: DOPE, INC. WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON JULY 28, 2009. OWNERS MAY CONTACT DOPE, INC. AT 1-626-272-1798.
SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS. Remedy: SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.
CERTAIN AJ MOTORSPORT COMBINATION LAMPS SOLD AS REPLACEMENT LAMPS FOR USE ON THE ABOVE LISTED PASSENGER VEHICLES. COMBINATION LAMPS NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT. Remedy: AJ MOTORSPORT WILL NOTIFY OWNERS AND OFFER REIMBURSEMENT FOR THE LAMPS. THE RECALL BEGAN ON JULY 31, 2006. OWNERS MAY CONTACT AJ MOTORSPORT AT 626-618-2026.
CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES. Remedy: HONEYWELL WILL REPLACE THE AFFECTED OIL FILTERS FREE OF CHARGE. THE RECALL BEGAN DURING NOVEMBER 2007. OWNERS CAN CONTACT FRAM CUSTOMER SERVICE TOLL-FREE AT 1-800-890-2075.
CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT. Remedy: PRO-A MOTORS WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE LAMPS. THE RECALL BEGAN ON APRIL 3, 2006. OWNERS MAY CONTACT PRO-A MOTORS AT 323-838-2988.
SYSTEM: ELECTRICAL.VEHICLE DESCRIPTION: SEQ 9C1 POLICE CARS IN CORROSION AREAS OF THE US AND CANADA ONLY. NOTE: VEHICLES ORIGINALLY SOLD OR CURRENTLY REGISTERED IN THE STATES OF: CONNECTICUT, ILLINOIS, INDIANA, MAINE, MASSACHUSETTS, MICHIGAN, NEW HAMPSHIRE, NEWJERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, AND WISCONSIN. A ELECTRICAL GROUND-OUT CONDITION MAY EXIST BETWEEN THE 12 VOLT JUNCTION BLOCK AND THE METAL INNER FENDER SKIRT. Remedy: INSTALL A SHIELDING INSULATOR UNDER THE JUNCTION BLOCK.
THE REAR LOWER CONTROL ARM CAN CRACK AT THE REAR STABILIZER BAR ATTACHMENT. Remedy: DEALERS WILL REPLACE BOTH REAR LOWER CONTROL ARMS AND REAR STABILIZER BAR ATTACHMENTS.
THE STEEL WHEELS EXHIBIT FATIGUE CRACKING AROUND THE CIRCUMFERENCE OF THE WHEEL LUG NUT MOUNTING SURFACE DUE TO WHEEL BENDING CAUSED BY FREQUENT MISUSE OF TIRE MOUNTING EQUIPMENT, LUG NUT OVERTORQUING, AND THE UNUSUAL OPERATING CONDITIONS EXPERIENCED BY POLICE VEHICLES. Remedy: REPLACE THE DEFECTIVE WHEELS WITH REDESIGNED STEEL WHEELS.
SECONDARY HOOD LATCH ASSEMBLIES CAN CORRODE, CAUSING A HIGH LATCH RELEASE EFFORT AND POSSIBLY PREVENTING THE HOOD FROM LATCHING PROPERLY WHEN IT IS CLOSED. Remedy: INSTALL A NEW SECONDARY HOOD LATCH ASSEMBLY.
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE ANTILOCK BRAKE SYSTEM (ABS) MODULATOR CAN CORRODE AND LEAK FLUID FROM THE FRONT BRAKE CIRCUIT. Remedy: DEALERS WILL INSPECT THESE VEHICLES AND REPLACE THE ABS MODULATOR.
THE ENGINE MOUNTED FUEL FEED AND RETURN PIPES MAY FRACTURE DUE TO CONTACT WITH THE ENGINE FRAME DURING OPERATION. Remedy: REPLACE THE FUEL FEED AND RETURN PIPES USING NEW PIPE ASSEMBLIES.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
THE ABS MODULATOR MAY CORRODE AND LEAK FLUID FROM THE FRONT BRAKE CIRCUIT. BRAKE FLUID LEAKAGE COULD REDUCE BRAKE EFFECTIVENESS AND INCREASE STOPPING DISTANCES. THIS COULD RESULT IN A CRASH WITHOUT PRIOR WARNING. CORRECTION: DEALERS WILL REMOVE EXISTING CORROSION FROM THE ABS MODULATOR AND INSTALL A KIT TO PREVENT FUTURE CORROSION.
NOTE: POLICE SEDANS AND TAXI CABS. THE REAR LOWER CONTROL ARM MAY CRACK AT THE REAR STABILIZER BAR ATTACHMENT AND EVENTUALLY COULD CAUSE THE LOWER CONTROL ARM TO FRACTURE COMPLETELY. THIS COULD RESULT IN LOSS OF VEHICLE CONTROL AND A CRASH WITHOUT PRIOR WARNING. CORRECTION: BOTH REAR LOWER CONTROL ARMS AND REAR STABILIZER BAR ATTACHMENTS WILL BE REPLACED ON AFFECTED VEHICLES.
On certain vehicles, an electrical "ground out" condition between the 12 volt junction block and the metal inner fender skirt may cause a melted junction block, smoke and burned underhood wiring. This could result in a disabled vehicle or a vehicle fire. This condition can occur while the vehicle is in operation, or with the vehicle parked and the ignition in the "OFF" position. Correction: Junction blocks will be inspected for corrosion and a shielding insulator will be installed under the junction block where required.
NOTE: POLICE SEDANS AND POLICE STATION WAGONS. THE 15" X 7" (CODE RDL) STEEL WHEELS ON THESE VEHICLES COULD FRACTURE AND BECOME SEPARATED FROM THE VEHICLE DUE TO WHEEL DISTORTION. IF WHEEL SEPARATION WERE TO OCCUR WHILE A VEHICLE WAS IN MOTION, STEERING AND BRAKING COULD BE AFFECTED AND A VEHICLE CRASH COULD OCCUR WITHOUT PRIOR WARNING. CORRECTION: REDESIGNED 15" X 7" STEEL WHEELS WILL BE INSTALLED.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
THE SECONDARY HOOD LATCHES ON THESE VEHICLES CAN CORRODE CAUSING A VERY HIGH LATCH RELEASE EFFORT AND POSSIBLY PREVENTING THE HOOD FROM LATCHING PROPERLY WHEN IT IS CLOSED. IF THE SECONDARY HOOD LATCH IS NOT PROPERLY ENGAGED THE HOOD COULD OPEN UNEXPECTEDLY. IF THIS WERE TO OCCUR WHILE THE VEHICLE WAS IN MOTION, THE DRIVER'S FORWARD VISION WOULD BE IMPAIRED POSSIBLY RESULTING IN A VEHICLE CRASH. CORRECTION: A NEW SCONDARY HOOD LATCH ASSEMBLY WITH IMPROVED CORROSION RESISTANCE WILL BE INSTALLED ON AFFECTED VEHICLES.