Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 1994 Chrysler Concorde, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE LOWER CONTROL ARM ATTACHING BRACKETS CAN CRACK DUE TO FATIGUE AND SEPARATE FROM THE ENGINE CRADLE. Remedy: DEALERS WILL REINFORCE THE ENGINE CRADLE AT THE POINT WHERE THE LOWER CONTROL ARM ATTACHES TO IT.
THE RIGHT STEERING TIE ROD CAN RUB THROUGH THE AUTOMATIC TRANSMISSION WIRING HARNESS CAUSING A SHORT CIRCUIT WHICH RESULTS IN ELECTRICAL SYSTEM MALFUNCTIONS INCLUDING ENGINE STALLING AND AN INOPERATIVE PARK/STARTER INTERLOCK SYSTEM. Remedy: INSTALL A REVISED WIRING HARNESS BRACKET AND A PLASTIC CONVOLUTED SLEEVE TO PROTECT THE TRANSMISSION WIRING HARNESS.
ON CERTAIN PASSENGER VEHICLES, THE FLOOR SHIFTER IGNITION-PARK INTERLOCK MAY FAIL AND ALLOW THE SHIFTER TO BE MOVED OUT OF THE PARK POSITION WITH THE KEY REMOVED. AN INOPERATIVE INTERLOCK MAY ALSO ALLOW THE KEY TO BE REMOVED WHEN THE SHIFTER HAS NOT BEEN PLACED IN THE PARK POSITION. Remedy: DEALERS WILL INSTALL A NEW LOAD-LIMITING PUSH ROD INTO THE FLOOR SHIFTER LEVER OF THE AFFECTED VEHICLES. OWNER NOTIFICATION BEGAN ON JUNE 14, 2004. OWNERS SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
VEHICLE DESCRIPTION: PASSENGER VEHICLES BUILT WITH 3.5L ENGINES. THE FUEL INJECTION DELIVERY SYSTEM CAN LEAK FUEL FROM SOME OF THE SEALING O-RINGS OR FROM HAIR LINE CRACKS IN THE THERMOSET FUEL INJECTION RAIL. Remedy: DEALERS WILL REPLACE THE FUEL RAIL O-RINGS AND REINFORCE THE OUTLET (PASSENGER) SIDE FUEL RAIL. VEHICLES SHOWING FUEL LEAKAGE ON THE OUTLET FUEL RAIL MUST HAVE THE OUTLET RAIL REPLACED WHICH INCLUDES CHANGING THE UPPER AND LOWER INJECTOR O-RINGS. HOWEVER, IF A VEHICLE IS LEAKING FUEL FROM THE O-RINGS OR FROM A CRACKED FUEL LINE, THE VEHICLE SHOULD BE TAKEN INTO A DEALER TO HAVE THIS REPAIRED AS SOON AS POSSIBLE.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain vehicles equipped with an automatic transmission and a floor-mounted shifter, the ignition-park interlock may become defeated and allow the shifter to be moved out of the Park position with the key removed. An inoperative interlock may also allow the key to be removed when the shifter has not been placed in the Park position. This may result in the vehicle rolling away without warning. Correction: Dealer will inspect the function of the ignition-park interlock system. Vehicles found with functional interlock systems will have a load-limiting push rod installed into the floor shifter lever. Vehicles with a non-functional ignition-park interlock system will have the shifter assembly replaced.
On certain vehicles, the lower control arm attaching brackets may crack due to fatigue and cause the lower control arm to separate from the engine cradle. If this occurs, the transmission half-shaft may pull out of the transaxle and result in a loss of motive power, increasing the risk of a motor vehicle accident. Correction: Engine cradle will be reinforced at the point of attachment to the lower control arm.
NOTE: VEHICLES EQUIPPED WITH 3.5 LITRE ENGINE. THE FUEL INJECTION DELIVERY SYSTEM MAY LEAK FUEL FROM SOME OF THE SEALING "O-RINGS" OR FROM HAIRLINE CRACKS IN THE THERMOPLASTIC FUEL INJECTION RAIL. IN THE PRESENCE OF AN IGNITION SOURCE SUCH A CONDITION COULD RESULT IN A FIRE. CORRECTION: THE NITRILE RUBBER "O-RINGS" WILL BE REPLACED WITH "O-RINGS" MADE OF AN IMPROVED MATERIAL. THE FUEL RAIL WILL ALSO BE EVALUATED AND REPLACED AS REQUIRED.
THE RIGHT SIDE STEERING TIE ROD MAY RUB AGAINST THE AUTOMATIC TRANSMISSION WIRING HARNESS INSULATION RESULTING IN A SHORT CIRCUIT. THIS COULD CAUSE ELECTRICAL SYSTEM MALFUNCTIONS, INCLUDING ENGINE DIE OUT AND AN INOPERATIVE PARK/STARTER INTERLOCK SYSTEM. CORRECTION: A REVISED WIRING HARNESS BRACKET AND PLASTIC CONVOLUTE SLEEVE WILL BE INSTALLED TO PROTECT THE TRANSMISSION WIRING HARNESS.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain