Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 1994 Saab 9000, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
ONE OF THE BULBS IN EACH OF THE BRAKE LIGHT LOWER OUTBOARD LAMP ASSEMBLIES MAY NOT HAVE BEEN PROPERLY WIRED, RESULTING IN IMPROPER TAIL LIGHT ILLUMINATION ON BRAKE APPLICATION. THIS DOES NOT CONFORM TO THE REQUIREMENTS OF FMVSS NO 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." Remedy: DEALERS WILL MODIFY THE BRAKE LIGHT OUTBOARD LAMP ASSEMBLIES TO MEET FMVSS REQUIREMENTS.
MOISTURE CAN FOLLOW THE ELECTRICAL HARNESS AND ENTER THE PRESSURE SWITCH CONNECTOR CAUSING CORROSION AND MALFUNCTION OF THE SWITCH. Remedy: DEALERS WILL INSPECT THE ELECTRICAL CONNECTIONS TO THE ABS PRESSURE SWITCH TERMINALS FOR CORROSION AND INSTALL A SHRINK HOSE TO THE WIRING HARNESS TO AVOID MOISTURE ENTERING THE CONNECTION. PRESSURE SWITCHES WITH CORRODED CONNECTORS WILL BE REPLACED.
VEHICLE DESCRIPTION: PASSENGER VEHICLES. MOISTURE CAN ENTER THE AIR BAG INFLATABLE RESTRAINT ELECTRONIC CONTROL MODULE (ECM) AND CAUSE CORROSION ON PORTIONS OF THE ECM PRINTER CIRCUIT BOARDS. Remedy: DEALERS WILL INSPECT THE EXTERIOR OF THE ECM. IF THERE IS NO INDICATION OF MOISTURE, A COVER WILL BE INSTALLED OVER THE ECM. IF THERE IS INDICATION OF MOISTURE, THE DEALER WILL REPLACE THE ECM AND INSTALL A COVER OVER THE NEW ECM.
DURING LOW ENERGY FRONTAL IMPACT COLLISIONS, THE FRONT CROSSMEMBER CAN CONTACT THE METAL TUBING PORTION OF THE COOLER HOSE ASSEMBLY; AND/OR THE HOSE ASSEMBLY CAN BREAK AND LEAK OIL ONTO THE HOT EXHAUST MANIFOLD OR THE TURBOCHARGER. Remedy: DEALERS WILL INSTALL A PROTECTIVE COVER WHICH WILL PROTECT THE COOLER AND HOSES FROM OTHER STRUCTURAL COMPONENTS IN LOW ENERGY FRONT IMPACTS.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain vehicles, moisture could enter the air bag electronic control module and cause corrosion on portions of the ECM printer circuit boards. This condition can, in extreme cases, create open connections in circuits controlling air bag deployment with the possibility of inadvertent air bag and/or pretensioner deployment. Correction: Dealers will inspect the electronic control module and install a protective cover over the module to prevent moisture from entering.
ON VEHICLES EQUIPPED WITH "MkII" ABS BRAKING SYSTEM, MOISTURE MAY FOLLOW THE WIRING TO THE PRESSURE WARNING SWITCH ON THE ABS UNIT WHICH CAN CAUSE CORROSION TO BUILD UP ON THE CONNECTION TERMINAL. A MALFUNCTION COULD CAUSE A LOSS OF POWER ASSISTANCE. CORRECTION: IF THE SWITCH CONNECTION PINS ARE CORRODED, THE SWITCH WILL BE REPLACED. ON ALL AFFECTED VEHICLES, THE SWITCH CONNECTION WILL BE SPRAYED WITH A COATING AND SHRINK SLEEVE WILL BE APPLIED TO SEAL THE CONNECTION FROM WATER.
A SLIGHTLY DOWNWARD LOW ENERGY IMPACT COULD RESULT IN BREAKAGE OF THE ENGINE OIL COOLER HOSE AND/OR HOUSING. LEAKING OIL FROM THE OIL COOLER CAN BE IGNITED BY A HOT EXHAUST MANIFOLD OR TURBOCHARGER RESULTING IN AN ENGINE COMPARTMENT FIRE. CORRECTION: A PROTECTIVE COVER WILL BE INSTALLED OVER THE OIL COOLER.
Certain vehicles do not comply with CMVSS 108 - Lighting Equipment. Faulty connection of brake lights.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain