Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 1995 GMC Safari, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
CERTAIN R&B, INC. CENTRAL MULTIPORT FUEL INJECTION (CMFI) FUEL RETURN LINES, MODELS HELP 55163, NAPA BALKAMP 700-3270, AND THE CONNECTION 2560001, SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR THE VEHICLES LISTED ABOVE. THE FUEL RETURN LINE HAS A MECHANICAL BLEED VALVE WHICH WAS NOT INSTALLED AT THE PROPER TORQUE. Remedy: R&B, INC. WILL NOTIFY OWNERS AND AT THE CUSTOMERS REQUEST, EITHER REPLACE THE FUEL LINE OR OFFER A FULL REFUND. THE RECALL BEGAN ON MAY 4, 2006. OWNERS MAY CONTACT R&B, INC. AT 215-712-5330.
CERTAIN REPLACEMENT FUEL FILTERS, FRAM BRAND NAME P/N G3727, WITH DATE CODES X52911 THROUGH X60801 SEQUENTIALLY OR X600141 AND A MEXICO COUNTRY OR ORIGIN MARKING ON THE FUEL FILTER HOUSING MANUFACTURED FROM OCTOBER 18, 2005, THROUGH MARCH 21, 2006, SOLD FOR USE ON THE VEHICLES LISTED ABOVE AND ON CERTAIN SCHOOL BUSES. (TO SEE THE SCHOOL BUS ENGINE SIZES, CLICK ON "DOCUMENT SEARCH" AND THEN "BUS APPLICATIONS"). THE CONNECTOR ON THE FUEL FILTER WAS NOT MANUFACTURED TO HONEYWELL'S SPECIFICATION. AS A RESULT, THE O-RING MAY NOT SEAT CORRECTLY ON THE FUEL LINE. Remedy: HONEYWELL WILL NOTIFY OWNERS AND REPLACE THE FUEL FILTERS FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 18, 2006. OWNERS MAY CONTACT FRAM CUSTOMER SERVICE AT 1-800-890-2075 (OPTION 1).
CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT. Remedy: PRO-A MOTORS WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE LAMPS. THE RECALL BEGAN ON APRIL 3, 2006. OWNERS MAY CONTACT PRO-A MOTORS AT 323-838-2988.
ON CERTAIN MINIVANS, PICKUP TRUCKS, AND SPORT UTILITY VEHICLES WITH CERTAIN MODEL-ENGINE COMBINATIONS, THE WINDSHIELD WIPER MOTOR MAY FAIL DUE TO CRACKED SOLDER JOINTS ON THE CONTROLLER CIRCUIT BOARD. THE WINDSHIELD WIPERS COULD WORK INTERMITTENTLY OR NOT AT ALL. Remedy: DEALERS WILL REPLACE THE WIPER MOTOR CIRCUIT BOARD AND COVER. OWNER NOTIFICATION BEGAN ON JUNE 19, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CHEVROLET AT 1-800-222-1020, GMC AT 1-800-462-8782, OR OLDSMOBILE AT 1-800-442-6537.
THE FUEL LINES ATTACHED TO THE FUEL TANK WERE NOT PROPERLY TIGHTENED. Remedy: DEALERS WILL LOWER THE FUEL TANK AND TIGHTEN THE FUEL TANK LINES TO THE PROPER TORQUE VALUE.
THESE VEHICLES WERE ASSEMBLED WITH THE LEFT-HAND LOWER CONTROL ARM-TO-FRAME REAR NUT NOT TIGHTENED TO THE SPECIFIED TORQUE. Remedy: DEALERS WILL TIGHTEN THE LEFT-HAND LOWER CONTROL ARM-TO- FRAME REAR NUT TO THE PROPER TORQUE SPECIFICATION.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Certain vehicles (not involved in recall 98-150), may experience a windshield wiper failure due to cracked solder joints on the controller circuit board. If this were to occur in a severe weather situation, driver's visibility could be reduced, which could result in a vehicle crash without prior warning. Correction: Dealer will replace defective wiper motor until 7 years or 112 000 km from date vehicle was originally placed into service or for those vehicles currently outside of this coverage, until March 31 2004.
THE LEFT HAND LOWER CONTROL ARM TO FRAME REAR NUT MAY BE TIGHTENED BELOW THE SPECIFIED TORQUE. THIS MAY ALLOW THE ATTACHMENT BOLT TO LOOSEN AND SUBSEQUENTLY FATIGUE AND BREAK. BOLT BREAKAGE COULD RESULT IN SEPARATION OF THE LEFT HAND CONTROL ARM FROM THE FRAME CAUSING LOSS OF VEHICLE CONTROL AND A CRASH WITHOUT PRIOR WARNING. CORRECTION: DEALERS WILL TIGHTEN THE LEFT HAND LOWER CONTROL ARM TO FRAME REAR NUT TO THE PROPER TORQUE SPECIFICATION.
THESE VANS MAY HAVE FUEL LINES ATTACHED TO THE FUEL TANK WITH LESS THAN THE SPECIFIED TORQUE. OVER TIME THESE FUEL LINES MAY LOOSEN TO THE POINT OF ALLOWING FUEL TO LEAK FROM THE LINES WHEN THE FUEL PUMP IS OPERATING. IN THE PRESENCE OF AN IGNITION SOURCE, AN UNDERHOOD FIRE COULD OCCUR. CORRECTION: DEALERS WILL LOWER THE TANK AND TIGHTEN THE FUEL LINES TO THE PROPER TORQUE.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain