Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 1996 Ford Contour, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
FEDERAL MOGUL IS RECALLING 6,903 AFTERMARKET BALL JOINT ASSEMBLIES SHIPPED BETWEEN NOVEMBER 9, 2007 AND MARCH 26, 2008, WHICH MAY HAVE BEEN PACKAGED WITH INCORRECT NUTS. THE PART NUMBERS PACKAGED WITH INCORRECT NUTS ARE: K7147, K7329, K8683, AND 104353. THESE PARTS WERE MADE FOR USE ON THE VARIOUS VEHICLES LISTED ABOVE. Remedy: FEDERAL MOGUL WILL NOTIFY OWNERS AND REPLACE THE PARTS FREE OF CHARGE. THE RECALL BEGAN ON MAY 22, 2008. OWNERS CAN CONTACT FEDERAL MOGUL AT 877-489-6659.
CERTAIN AFTERMARKET BRAKE HYDRAULIC MASTER CYLINDERS SOLD AS REPLACEMENT BRAKE CYLINDERS FOR CERTAIN FORD, DAIMLERCHRYSLER, AND JEEP PASSENGER VEHICLES. THESE BRAKE CYLINDERS WERE SOLD UNDER THE BRAND NAMES OF NAPA, RAYBESTOS, AIMCO, AC DELCO, CARQUEST, BENDIX, AND WAGNER. ONLY PRODUCTS THAT WERE MANUFACTURED FROM JULY 27, 2005 THROUGH JANUARY 17, 2006 (DATE CODES 0529 THROUGH 0602) ARE SUBJECT TO THIS RECALL. WHEN SUBJECT TO VERY COLD TEMPERATURES, AN INTERNAL SEAL IN THE MASTER CYLINDER COULD LOSE FLEXIBILITY AND MAY CAUSE BRAKE FLUID TO LEAK. Remedy: AFFINIA (BRAKE PARTS, INC.) WILL REPLACE THE SUBJECT BRAKE HYDRAULIC MASTER CYLINDERS FREE OF CHARGE. THE RECALL BEGAN ON MARCH 20, 2006. OWNERS CAN CONTACT AFFINA GROUP CUSTOMER SERVICE AT 1-800-323-0354.
VEHICLE DESCRIPTION: 1995 PASSENGER VEHICLES EQUIPPED WITH THE 2.0L AND 2.5L ENGINES, AND 1996 VEHICLES EQUIPPED WITH 2.5L ENGINES. TIGHTENING OF THE ENGINE COOLING FAN MOTOR BEARINGS, UP TO AND INCLUDING MOTOR STALL, CAN RESULT IN INCREASED MOTOR TORQUE AND HIGHER THAN NORMAL MOTOR CURRENT AND ACCOMPANYING HIGH MOTOR TEMPERATURES. Remedy: DEALERS WILL INSTALL A POSITIVE TEMPERATURE COEFFICIENT DEVICE IN-LINE WITH EACH FAN MOTOR. FORD WILL ALSO EXTEND THE WARRANTY ON THE ENGINE COOLING FAN ASSEMBLY TO A TOTAL OF 8 YEARS OF SERVICE OR 100,000 MILES FROM THE WARRANTY START DATE, WHICHEVER OCCURS FIRST. IF THE VEHICLE ALREADY HAS MORE THAN 100,000 MILES, THIS COVERAGE WILL LAST UNTIL JULY 31, 2001.
VEHICLE DESCRIPTION: PASSENGER VEHICLES NOT EQUIPPED WITH THE ANTI-LOCK BRAKING SYSTEM (ABS). A PRESSURE CONSCIOUS REDUCING VALVE (PCRV) IN THE REAR BRAKES MAY BE SUBJECT TO CORROSION AND RESULT IN MALFUNCTION, WHEN OPERATED IN AREAS THAT USE SALT COMPOUNDS ON THE ROADWAY FOR DE-ICING OR DUST CONTROL. Remedy: DEALERS WILL INSTALL IMPROVED PCRV'S IN THE REAR BRAKE SYSTEM. THIS RECALL WAS EXPANDED IN SEPTEMBER 2000 TO INCLUDE 1999 AND 2000 FORD CONTOUR, MERCURY MYSTIQUE AND COUGAR VEHICLES.
THIS IS NOT A SAFETY RECALL IN ACCORDANCE WITH THE SAFETY ACT. HOWEVER, IT IS DEEMED A SAFETY IMPROVEMENT CAMPAIGN BY THE AGENCY. VEHICLE DESCRIPTION: 1995-1997 FORD CONTOUR AND MERCURY MYSTIQUE VEHICLES. THE HEATER BLOWER RESISTOR COULD OVERHEAT CAUSING THE ATTACHED ELECTRICAL CONNECTOR TO MELT. Remedy: FORD WILL PROVIDE ADDITIONAL WARRANTY COVERAGE FOR THE HEATER BLOWER SWITCH FOR 10 YEARS FROM ORIGINAL DATE OF SALE OF THE VEHICLE OR 150,000 MILES, WHICHEVER COMES FIRST. DEALERS WILL INSTALL A NEW HEATER BLOWER RESISTOR AND A NEW WIRE JUMPER HARNESS FREE OF CHARGE.
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE FUEL FILLER PIPE VENT HOSE MAY HAVE LESS THAN THE INTENDED LEVEL OF OZONE RESISTANCE, WHICH COULD RESULT IN THE HOSE BECOMING BRITTLE AND CRACKING. Remedy: DEALERS WILL INSTALL A FUEL FILLER VENT HOSE CONTACTING THE APPROPRIATE BLEND OF PVC AND NITRILE RUBBER.
ON CERTAIN MY 1996-1998 PASSENGER VEHICLES BUILT AT THE KANSAS CITY, CUAUTITLAN ASSEMBLY PLANTS OR ON MY 1999 PASSENGER VEHCLES BUILT AT THE AUTOMOTIVE ALLIANCE INTERNATIONAL ASSEMBLY PLANTS, THE ROUGH SURFACE OF THE HEATER BLOWER RESISTOR'S STAINLESS STEEL BLADES CAN DAMAGE THE COPPER SURFACE OF THE WIRING HARNESS CONNECTOR. THE DAMAGE COULD, OVER TIME, CAUSE INCREASED RESISTANCE IN THE CONNECTOR AND, DUE TO SUBSEQUENT TERMINAL RELAXATION, RESULT IN AN OPEN CIRCUIT CONDITION. Remedy: DEALERS WILL INSTALL A NEW HEATER BLOWER RESISTOR AND A NEW WIRE JUMPER HARNESS. OWNER NOTIFICATION BEGAN AUGUST 29, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FORD AT 1-800-392-3673.
VEHICLE DESCRIPTION: BI-FUEL VEHICLES MODIFIED TO RUN ON EITHER GASOLINE OR COMPRESSED NATURAL GAS (CNG). THE NATURAL GAS FUEL TANKS HAVE A SOLENOID SHUT-OFF VALVE THAT STOPS FUEL FLOW FROM THE FUEL TANK IN THE EVENT OF CERTAIN MODERATE TO SEVERE COLLISIONS. IF THE VEHICLE IS IN A COLLISION AND THE NATURAL GAS FUEL LINE IS DAMAGED, THE SYSTEM COULD LEAK NATURAL GAS. Remedy: FORD HAS REQUESTED OWNERS OF THESE VEHICLES TO HAVE THE CNG FUEL SYSTEM DISABLED UNDER A PREVIOUS RECALL CAMPAIGN AND TO ONLY USE GASOLINE FUEL UNTIL A PERMANENT CORRECTIVE ACTION IS DEVELOPED. OWNERS ARE BEING ALERTED TO THIS SOLENOID VALVE CONCERN AT THIS TIME. THE TIMING OF CORRECTIVE ACTIONS IS BEING DELAYED TO ALLOW BOTH CONDITIONS TO BE REMEDIED AT ONE TIME. IN THE MEANTIME, THERE IS NOT RISK AS LONG AS THE NATURAL GAS SYSTEM HAS BEEN DISABLED AND THE VHEICLE IS ONLY OPERATED ON GASOLINE.
VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH THE TRACTION CONTROL OPTION. THE THROTTLE CABLES WERE DAMAGED DURING VEHICLE ASSEMBLY LEADING TO FRAYING OR SEPARATION OF THE THROTTLE CABLE. Remedy: DEALERS WILL REPLACE THE THROTTLE CABLE WITH A REVISED DESIGN THAT IS LESS SUSCEPTIBLE TO BENDING OR KINKING DURING INSTALLATION.
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE FLOOR SHIFT AUTOMATIC TRANSMISSION CONTROL CAN BE DAMAGED IF SUBJECTED TO CERTAIN INTERIOR CLEANING PRODUCTS. THE GEAR POSITION INDICATOR CAN DETERIORATE AND NOT CORRECTLY INDICATE THE ACTUAL GEAR POSITION. Remedy: DEALERS WILL REPLACE THE AUTOMATIC TRANSMISSION FLOOR SHIFT CONTROL.
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE TERMINALS AT THE HEADLIGHT SWITCH AND WIRING HARNESS CONNECTOR CAN EXPERIENCE HEAT DAMAGE AS A RESULT OF OVERHEATING. Remedy: DEALERS WILL INSTALL A HEADLAMP SWITCH WIRING CONNECTOR CONTAINING BRONZE TERMINALS AND AN INSPECTION, AND REPLACEMENT IF NECESSARY, OF THE HEADLAMP SWITCH.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Certain passenger vehicles. The rough surface of the heater blower resistor's stainless steel blades can damage the copper surface of the wiring harness connector. The damage could, over time, cause increased resistance in the connector and, due to subsequent terminal relaxation, result in an open circuit condition. The heater blower resistor may overheat causing the attached electrical connector to melt, creating the potential for a fire. Correction: Dealers will install a new heater blower resistor and a new wire jumper harness.
On certain vehicles equipped with 2.5 litre V6 engines, tightening of the engine cooling fan motor bearings, up to and including motor stall, can result in increased motor torque and higher than normal motor current and accompanying high motor temperatures. Overheating of the cooling fan motor due to excessive current can result in smoke and odors from bearing grease, insulation and other internal motor components. If electrical current continues to be applied to the motor, internal motor components could ignite possibly igniting other engine compartment components. Correction: Dealers will install a Positive Temperature Coefficient device (a solid state resettable fuse-like device) in-line with each fan motor.
On certain vehicles, the pressure conscious reducing valve (PCRV) in each of the rear brakes may be subject to malfunction due to corrosion when operated in areas of high road salt use. If both PCRVs malfunction, vehicle handling may be adversely affected during braking as a result of the rear wheels locking, which could potentially result in a vehicle crash. Correction: Dealers will install improved PCRVs in the rear brake system.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, the fuel filler pipe vent hose may have less than the intended level of ozone resistance, which could result in the hose becoming brittle and cracking. A cracked hose could result in fuel leakage when the vehicle is being fueled. Fuel leakage in sufficient quantity in the presence of an ignition source could potentially result in a fire. Correction: Dealers will install a fuel filler vent hose containing the appropriate blend of PVC and nitrile rubber.
On certain vehicles, the terminals at the headlight switch and wiring harness connector may experience heat damage as a result of overheating. This can cause distortion of the terminal and an open circuit in the instrument panel illumination, parking lamp and tail lamp circuits. Correction: Dealers will install a headlamp switch wiring connector containing bronze terminals and inspect and if necessary, replace the headlamp switch.
On certain vehicles, the floor shift automatic transmission control may be damaged if subjected to certain vehicle interior cleaning products. If exposed to these products, the transmission gear position indicator may deteriorate and not correctly indicate the actual gear position. If this occurs, the shifter will continue to operate normally, but there is the potential for incorrect gear selection. Correction: Automatic transmission floor shift control will be replaced.
NOTE: VEHICLES EQUIPPED WITH 2.5 LITRE ENGINES. THESE VEHICLES MAY NOT COMPLY WITH C.M.V.S.S. 1103 - EXHAUST EMISSIONS. PREMATURE FAILURE OF THE CATALYST SUBSTRATE MATERIAL IN THE CATALYST AND EXHAUST MANIFOLD ASSEMBLIES (LIGHT-OFF CATALYSTS) CAN RESULT IN RESTRICTED EXHAUST GAS FLOW, LOSS OF POWER AND EXHAUST EMISSION LEVELS IN EXCESS OF THOSE SPECIFIED IN THE STANDARD. CORRECTION: LEFT AND RIGHT HAND LIGHT-OFF CATALYSTS WILL BE REPLACED. UNDERBODY CATALYST WILL BE INSPECTED AND REPLACED IF NECESSARY.
NOTE: ONLY VEHICLES EQUIPPED WITH THE TRACTION CONTROL OPTION ARE INVOLVED. THE THROTTLE CABLES ON THESE VEHICLES MAY HAVE BEEN DAMAGED DURING VEHICLE ASSEMBLY. THIS MAY LEAD TO FRAYING OR SEPARATION OF THE THROTTLE CABLE, WHICH COULD PREVENT THE ENGINE FROM RETURNING TO IDLE. THIS COULD ADVERSELY AFFECT VEHICLE CONTROL. CORRECTION: THROTTLE CABLE WILL BE REPLACED WITH A REVISED DESIGN VERSION.