Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 1996 Nissan Pathfinder, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
NISSAN IS RECALLING CERTAIN MODEL YEAR 1996-2004 PATHFINDER AND MODEL YEAR 1997-2003 INFINITI QX4 VEHICLES ORIGINALLY SOLD, OR CURRENTLY REGISTERED IN, CONNECTICUT, DELAWARE, IOWA, ILLINOIS, INDIANA, MASSACHUSETTS, MAINE, MARYLAND, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WASHINGTON D.C., WEST VIRGINIA AND WISCONSIN. IN AREAS OF THE COUNTRY IN WHICH HEAVY CONCENTRATIONS OF ROAD SALT ARE USED, A MIXTURE OF SNOW/WATER AND SALT MAY ENTER AN ASSEMBLY LOCATION HOLE IN THE UPPER STRUT HOUSING, CAUSING WATER TO COLLECT AT THE MATING SURFACE OF THE STRUT HOUSING PANEL AND THE INNER HOOD LEDGE ASSEMBLY. OVER TIME, THIS SNOW/WATER AND SALT INTRUSION MAY RESULT IN CORROSION OF THE STRUT TOWER HOUSING IN SOME SUBJECT VEHICLES. Remedy: NISSAN WILL INSPECT THE STRUT HOUSING AND REPAIR THE VEHICLES AS NECESSARY, FREE OF CHARGE. AN INTERIM NOTIFICATION LETTER WAS SENT OUT IN MAY 2011. THE SECOND NOTICE WAS MAILED ON JULY 25, 2011. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.
CERTAIN CK MOTORSPORTS COMBINATION HEADLIGHTS, CLEAR CORNER, BUMPER, AND SIDE MARKER LIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON THE PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT. Remedy: CK MOTORSPORT WILL NOTIFY OWNERS AND REPLACE THE NONCOMPLIANT LAMPS FREE OF CHARGE. THE RECALL BEGAN ON JULY 1, 2006. OWNERS MAY CONTACT CK MOTORSPORT AT 1-909-610-7211.
CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT. Remedy: PRO-A MOTORS WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE LAMPS. THE RECALL BEGAN ON APRIL 3, 2006. OWNERS MAY CONTACT PRO-A MOTORS AT 323-838-2988.
DUE TO THE THICKNESS OF THE CARPET PADDING ON THE TRANSMISSION TUNNEL, THE SPACE BETWEEN THE BRAKE PEDAL AND THE TRANSMISSION TUNNEL COULD CATCH A DRIVER'S RIGHT FOOT UNDER THE BRAKE PEDAL. Remedy: DEALERS WILL REMOVE THE CARPET PADDING ON THE TRANSMISSION TUNNEL ADJACENT TO THE ACCELERATOR PEDAL.
DUE TO THE TYPE OF LUBRICANT USED IN THE STEERING TRANSFER GEAR ASSEMBLY, THE EFFORT REQUIRED TO TURN THE STEERING WHEEL AT LOW AMBIENT TEMPERATURES (LESS THAN -30 C) COULD INCREASE TO THE POINT WHERE SOME DRIVERS WOULD HAVE DIFFICULTY IN TURNING THE WHEEL. Remedy: DEALERS ARE REPLACING THE STEERING TRANSFER GEAR ASSEMBLY WITH A NEW ASSEMBLY HAVING DIFFERENT LUBRICANT.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain vehicles operated in areas of heavy road salt usage during winter months, a mixture of snow/water and salt may enter an assembly location hole in the upper strut housing, causing water to collect at the mating surface of the strut housing panel and the inner hood ledge assembly. Over time, this snow/water and salt intrusion may result in corrosion of the strut tower housing structure. If the vehicle continues to be driven in this condition, the strut housing may crack and pull away from the inner hood ledge assembly. Should the strut housing separate and contact the steering column upper shaft, the steering shaft could break. A loss of steering control could result in a crash causing property damage and/or personal injury. Correction: Dealers will inspect the strut housing and, if no corrosion or only minor surface corrosion is present, an anti-corrosion seal will be applied. If moderate corrosion is present, resin patches will be applied in addition to the sealant. If there is evidence of more significant corrosion, a metal reinforcement plate will be used to reinforce the strut housing assembly. In instances where it is impossible to repair the vehicle, Nissan will provide an appropriate remedy.
NOTE: THERE ARE TWO DEFECTS IN THIS RECALL. (1) DUE TO THE THICKNESS OF THE CARPET PADDING ON THE TRANSMISSION TUNNEL, THE SPACE BETWEEN THE BRAKE PEDAL AND THE TRANSMISSION TUNNEL MAY BE SUCH THAT A DRIVER WEARING LARGE BOOTS COULD HAVE HIS OR HER RIGHT FOOT CATCH UNDER THE BRAKE PEDAL. THIS COULD RESULT IN A DELAY IN APPLYING THE BRAKES. (2) DUE TO THE TYPE OF LUBRICANT USED IN THE STEERING TRANSFER GEAR ASSEMBLY, THE EFFORT REQUIRED TO TURN THE STEERING WHEEL AT EXTREMELY LOW AMBIENT TEMPERATURES MAY INCREASE TO THE POINT WHERE SOME DRIVERS MAY HAVE DIFFICULTY TURNING THE STEERING WHEEL. CORRECTION: (1) CARPET PADDING ON THE TRANSMISSION TUNNEL ADJACENT TO THE ACCELERATOR PEDAL WILL BE REMOVED. (2) STEERING GEAR ASSEMBLY WILL BE REPLACED WITH ONE UTILIZING A DIFFERENT LUBRICANT.
We checked the EU Safety Gate for recall alerts naming this model and its production years.
Source: EU Safety Gate (European Commission) · CC BY 4.0, © European Union
Production dates not stated in the alert. Types: Almera (N16), Navara (D22), Pathfinder (R50), Patrol (Y61), Terrano II (R20), Tino (V10) and XTrail (T30)..
Production dates not stated in the alert. Types: Almera (N16); Navara (D22); Pathfinder (R50); Patrol (Y61); Terrano II (R20); Tino (V10); XTrail (T30).
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain