Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 1998 BMW R1200C, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
VEHICLE DESCRIPTION: MOTORCYCLES EQUIPPED WITH CHROME-PLATED FRAMES. COPPER RESIDUE CAN REMAIN IN THE TAPPED HOLE WHERE THE UPPER FORK BRIDGE ATTACHES TO THE FRAME. MOISTURE CAN CAUSE CORROSION TO OCCUR BETWEEN THE COPPER RESIDUE AND THE ALUMINUM FRAME. THE STRESS OF THE CONNECTING BOLT ATTACHING THE UPPER FORK TO THE FRAME COULD THEN DECREASE, LEADING TO LOOSENING, AND ULTIMATELY, BREAKAGE OF THE BOLT. Remedy: DEALERS WILL REAM THE HOLE IN THE FRAME HEAD AND INSTALL A HELICOIL THREAD INSERT AND A NEW BOLT. OWNER NOTIFICATION BEGAN DECEMBER 13, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117, OPTION #4.
VEHICLE DESCRIPTION: MOTORCYCLES. THE ADJUSTING SCREW FOR THE PRESSURE POINT OF EITHER THE BRAKE OR CLUTCH LEVERS MAY NOT BE SUFFICIENTLY TIGHT, DUE TO GREASE CONTAMINATION OF THE THREADS. Remedy: DEALERS WILL CHECK THE ADJUSTMENT SCREWS OF THE FRONT BRAKE AND CLUTCH LEVERS FOR MOVEMENT. IF THE SCREWS ARE TIGHT, NO FURTHER ACTION WILL BE TAKEN. IF A SCREW IS FOUND TO BE LOOSE, IT WILL BE REMOVED, CLEANED AND REINSTALLED WITH NEW LOCTITE.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Certain motorcycles equipment with chrome-plated frames. Copper residue can remain in the tapped hole where the upper fork bridge attaches to the frames. Moisture can cause corrosion to occur between the copper residue and the aluminum frame. The stress of the connecting bolt attaching the upper fork to the frame could them decrease, leading to loosening, and ultimately, breakage of the bolt. If this happening, the dynamic stability of the motorcycle would be affected and a loss of control could occur. Correction: dealers will ream the hole in the frame head and install a helicoil thread insert and a new bolt.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain