Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 1998 Dodge Durango, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
CERTAIN AFTERMARKET BRAKE HYDRAULIC MASTER CYLINDERS SOLD AS REPLACEMENT BRAKE CYLINDERS FOR CERTAIN FORD, DAIMLERCHRYSLER, AND JEEP PASSENGER VEHICLES. THESE BRAKE CYLINDERS WERE SOLD UNDER THE BRAND NAMES OF NAPA, RAYBESTOS, AIMCO, AC DELCO, CARQUEST, BENDIX, AND WAGNER. ONLY PRODUCTS THAT WERE MANUFACTURED FROM JULY 27, 2005 THROUGH JANUARY 17, 2006 (DATE CODES 0529 THROUGH 0602) ARE SUBJECT TO THIS RECALL. WHEN SUBJECT TO VERY COLD TEMPERATURES, AN INTERNAL SEAL IN THE MASTER CYLINDER COULD LOSE FLEXIBILITY AND MAY CAUSE BRAKE FLUID TO LEAK. Remedy: AFFINIA (BRAKE PARTS, INC.) WILL REPLACE THE SUBJECT BRAKE HYDRAULIC MASTER CYLINDERS FREE OF CHARGE. THE RECALL BEGAN ON MARCH 20, 2006. OWNERS CAN CONTACT AFFINA GROUP CUSTOMER SERVICE AT 1-800-323-0354.
CERTAIN REPLACEMENT K&N FUEL PERFORMANCE KITS, P/NOS. 57-1509, 57-1511, 57-1511-1, 57-1517, 57-1517-1, 57-1527, AND 57-1530. ALSO, A SMALL PERCENTAGE OF THESE KITS WERE SOLD UNDER THE MOPAR PERFORMANCE PARTS BRAND NAME (P/NOS. P5007069 AND P5007070). ALL KITS WERE MANUFACTURED FROM APRIL 20, 1999, THROUGH SEPTEMBER 23, 2004. THESE ASSEMBLIES WERE MANUFACTURED AS REPLACEMENT EQUIPMENT FOR CERTAIN DODGE PICKUP TRUCKS AND SUVS. A SMALL PIECE OF MATERIAL FROM THE TUBE WALL COULD BE SUCKED INTO THE ENGINE THROTTLE BODY, WHICH COULD CAUSE THE THROTTLE TO BECOME JAMMED IN THE OPEN POSITION. Remedy: K&N WILL PROVIDE OWNERS WITH A FREE REPAIR KIT ALONG WITH REPAIR INSTRUCTIONS. THE RECALL BEGAN ON APRIL 20, 2006.
VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE REAR BRAKE TUBE CAN CONTACT AN UNDERBODY CROSSMEMBER EVENTUALLY WEARING A HOLE IN THE TUBE. Remedy: DEALERS WILL INSTALL A RUBBER ISOLATOR ON ALL VEHICLES THAT DO NOT INDICATE TUBE CONTACT. VEHICLES THAT SHOW CONTACT AND HAVE LESS THAN 45,000 MILES AND NO SIGNS OF RED RUST WILL HAVE THE RUBBER ISOLATOR INSTALLED WITH SILICONE TO PROTECT THE TUBE WHERE THE COATING HAS WORN OFF. VEHICLES THAT EXHIBIT CONTACT, AND HAVE MORE THAN 45,000 MILES OR SHOW SIGNS OF RED RUST, WILL HAVE THE BRAKE TUBE REPLACED WITH THE PRODUCTION TUBE AND ISOLATOR.
VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE FUEL TANK STRAP CAN SEPARATE DUE TO FATIGUE DURING OPERATION. IF THIS OCCURS, THE TANK WILL BE UNSUPPORTED, INCREASING THE RISK OF A FUEL LEAK. Remedy: DEALERS WILL REPLACE THE DOUBLE TOGGLE LOCK FUEL TANK STRAPS WITH SINGLE TOGGLE LOCK DESIGN. NOTE: AFFECTED VEHICLES BUILT THROUGH MAY 21, 1998, ALSO REQUIRE THE REAR BRAKE TUBE INSPECTION/REPAIR. AS A RESULT, THE FUEL TANK STRAP AND BRAKE TUBE REPAIR WILL BE PERFORMED ON THESE VHEICLES IN A SINGLE SERVICE PROCEDURE UNDER RECALL 99V-341/DAIMLERCHRYSLER #841. AFFECTED VEHICLES BUILT FROM MAY 22, 1998 THROUGH SEPTEMBER 25, 1999, ONLY REQUIRE THE FUEL TANK STRAP REPAIR, WHICH WILL BE PERFORMED UNDER RECALL 99V-342/DAIMLERCHRYSLER #842.
VEHICLE DESCRIPTION: PICKUP TRUCKS. SOUND DEADENER MATERIAL INSIDE THE STEERING WHEEL COULD BECOME DETACHED FROM THE COVER AND HOUSING. NOTE: THE RAM PICKUP TRUCKS WERE BUILT AT THE WARREN ASSEMBLY PLANT ("S" IN THE 11TH VIN POSITION) FROM MAY 16, 2000 THROUGH OCTOBER 23, 2000; ST. LOUIS NORTH ASSEMBLY PLANT ("J" IN THE 11TH VIN POSITION) FROM MAY 19, 2000 THROUGH OCTOBER 23, 2000; LAGO ALBERTO ASSEMBLY PLANT ("M" IN THE 11TH VIN POSITION) FROM MAY 23, 2000 THROUGH OCTOBER 23, 2000; AND SALTILLO ASSEMBLY PLANT ("G" IN THE 11TH VIN POSITION) FROM MAY 23, 2000 THROUGH OCTOBER 23, 2000. IMPORTANT: VEHICLES THAT HAVE ALREADY HAD THE PROPER CLOCKSPRING INSTALLED, ACCORDING TO WARRANTY RECORDS, HAVE BEEN EXCLUDED FROM THIS RECALL. IN ADDITION, 1997-2000 MODEL YEAR VEHICLES THAT HAVE HAD A SUSPECT REPLACEMENT CLOCKSPRING INSTALLED, ACCORDING TO WARRANTY RECORDS, HAVE BEEN ADDED TO THIS RECALL. Remedy: DEALERS WILL REPLACE THE CLOCKSPRING ASSEMBLY. OWNER NOTIFICATION BEGAN JUNE 18, 2001. ALSO SOME 1997-200 MODEL YEAR VEHICLES THAT, ACCORDING TO WARRANTY RECORDS, HAVE HAD A SUSPECT REPLACEMENT CLOCKSPRING INSTALLED, WILL ALSO BE INCLUDED IN THIS CAMPAIGN. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
VEHICLE DESCRIPTION: LIGHT DUTY PICKUP TRUCKS. THE FASTENER WHICH SECURES THE GENERATOR CABLE TO THE POWER DISTRIBUTION CENTER (PDC) HAS AN INSUFFICIENT CLAMP LOAD, RESULTING IN A LOOSE CONNECTION AND ELECTRICAL ARCING AT THE CONNECTION. Remedy: DEALERS WILL RETIGHTEN THE GENERATOR CABLE AND BATTERY CABLE FASTENERS TO THE PROPER TORQUE SPECIFICATIONS.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain vehicles, the rear brake tube may contact an underbody crossmember during normal vehicle operation and eventually wear a hole in the tube. If the tube becomes perforated, a reduction in braking will occur at the rear wheels, increasing stopping distances and increasing the risk of a vehicle crash without prior warning. Correction: Vehicles will be inspected and a rubber isolator will be installed on the brake tube. Those vehicles exhibiting contact that have more than 75,000km will have the brake tube replaced with the production tube and isolator.
On certain vehicles, the fuel tank strap may separate due to high stress concentration at the double toggle lock upset area. Fuel tank strap separation could result in the fuel tank contacting the road surface or, on vehicles equipped with a fuel tank skid plate, the tank may contact the skid plate and wear at the point of contact. Either condition could result in fuel tank leakage. Correction: Double toggle lock fuel tank straps will be replaced with the single toggle lock design.
THE FASTENERS WHICH SECURE THE ALTERNATOR CABLE TO THE POWER DISTRIBUTION CENTER (PDC) MAY HAVE INSUFFICIENT CLAMP LOAD. INSUFFICIENT CLAMPING MAY RESULT IN A LOOSE CONNECTION AND ARCING AT THE CONNECTION, WHICH COULD POTENTIALLY CAUSE A FIRE IN THE ENGINE COMPARTMENT. CORRECTION: THE ALTERNATOR AND BATTERY CABLE ATTACHING NUTS WILL BE TORQUED AT THE PDC TO THE PROPER SPECIFICATIONS.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain