Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 1999 Ford Explorer, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
DOPE, INC. IS RECALLING 42,540 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS. Remedy: DOPE, INC. WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON JULY 28, 2009. OWNERS MAY CONTACT DOPE, INC. AT 1-626-272-1798.
CERTAIN AFTERMARKET FUEL FILTERS SOLD UNDER THE PUROLATOR BRAND NAME, P/N F65277, SHIPPED FROM JANUARY 16 THROUGH JUNE 2, 2006, FOR USE ON THE ABOVE LISTED PASSENGER VEHICLES. DUE TO INCORRECT DESIGN, THE QUICK CONNECTORS MAY NOT FULLY SEAT WITH THE TUBE INTERFACE, EVEN THOUGH THE PERSON MAKING THE CONNECTION MAY BELIEVE THAT THE QUICK CONNECTOR IS FULLY ATTACHED. Remedy: UFI WILL NOTIFY OWNERS AND REPLACE THE FILTERS FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 4, 2006. OWNERS MAY CONTACT UFI FILTERS USA AT 800-230-5876.
FORD IS RECALLING MODEL YEARS 1995-2003 WINDSTAR, 2000-2003 EXCURSION DIESEL, 1993-1997 AND 1999-2003 F-250 SD THROUGH F-550 SD DIESEL, 1992-2003 E-150 THROUGH E-550, 1995-2002 EXPLORER, 1997 AND 2002 MERCURY MOUNTAINEER, 1995-1997 AND 2001-2003 RANGER, AND 1994 F53 VEHICLES EQUIPPED WITH THE TEXAS INSTRUMENTS SPEED CONTROL DEACTIVATION SWITCH (SCDS). THE SCDS MAY LEAK INTERNALLY AND THEN OVERHEAT, SMOKE, OR BURN. Remedy: FORD WILL NOTIFY OWNERS THAT DEALERS WILL INSTALL A FUSED WIRING HARNESS IN LINE WITH THE SCDS. ON 1999-2003 WINDSTAR VEHICLES WITH A LEAKING SCDS, DEALERS WILL ALSO INSPECT THE ABS CONTROL MODULE CONNECTOR AND REPAIR AS NECESSARY. REPAIRS WILL BE COMPLETED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 27, 2009. OWNERS MAY CONTACT FORD AT 1-888-222-2751.
SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS. Remedy: SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.
ON CERTAIN PICKUP TRUCKS, PASSENGER VEHICLES, SPORT UTILITY VEHICLES, AND MOTOR HOMES CHASSIS, THE SPEED CONTROL DEACTIVATION SWITCH MAY, UNDER CERTAIN CONDITIONS, LEAK INTERNALLY AND THEN OVERHEAT, SMOKE, OR BURN. Remedy: DEALERS WILL INSTALL A FUSED WIRING HARNESS. OWNERS OF THE PASSENGER CARS INCLUDED IN THIS CAMPAIGN WILL BE INSTRUCTED TO RETURN THEIR VEHICLES TO THEIR DEALERS TO HAVE THE SPEED CONTROL DEACTIVATION SWITCH DISCONNECTED AS AN INTERIM REPAIR. AS SOON AS REPAIR PARTS ARE AVAILABLE (EXPECTED OCTOBER 2007), OWNERS WILL BE INSTRUCTED TO RETURN TO THE DEALERS FOR INSTALLATION OF A FUSED WIRING HARNESS. THE RECALL BEGAN ON AUGUST 13, 2007, AND MAILING COMPLETED BY SEPTEMBER 19, 2007. OWNERS MAY CONTACT FORD AT 1-888-222-2751.
VEHICLE DESCRIPTION: MULTI-PURPOSE VEHICLES EQUIPPED WITH 4.0L ENGINES AND ALL-TIME 4-WHEEL DRIVE (A4WD) POWERTRAINS. THE GENERIC ELECTRONIC MODULE (GEM) COULD EXPERIENCE A CONDITION REFERRED TO AS "LOCK-UP" IN WHICH THE GEM CONTROLLED ELECTRONIC FUNCTIONS (E.G., FRONT WINDSHIELD WIPERS, INTERIOR LIGHTS, 4X4 SYSTEM, ETC.) COULD NOT BE TURNED ON OR, IN SOME CASES IF THE FUNCTION IS ON, COULD NOT BE TURNED OFF. Remedy: DEALERS WILL INSTALL A RESISTOR IN THE GEM CIRCUIT.
CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT. Remedy: PRO-A MOTORS WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE LAMPS. THE RECALL BEGAN ON APRIL 3, 2006. OWNERS MAY CONTACT PRO-A MOTORS AT 323-838-2988.
VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES EQUIPPED WITH THE 3.27 OR 3.55 AXLE RATION. THE SUBJECT VEHICLES HAVE A POWERTRAIN CONTROL MODULE THAT COULD ALLOW THE VEHICLE TO EXCEED THE DESIGN INTENT TOP SPEED. AT THESE EXTREME SPEEDS, THE VEHICLE COULD BE CAPABLE OF EXCEEDING THE SPEED RATING OF THE TIRE. Remedy: DEALERS WILL REPROGRAM THE POWERTRAIN CONTROL MODULE.
ON CERTAIN SPORT UTILITY VEHICLES EQUIPPED WITH SPEED CONTROL AND 4.0L SOHC ENGINES, IF THE STRAND COVER ON THE SPEED CONTROL CABLE BECOMES FLARED AT THE END, THE SPEED CONTROL CABLE MAY BIND WHEN THE SPEED CONTROL IS ACTIVATED. Remedy: DEALERS WILL INSPECT THE SPEED CONTROL CABLE AND, IF NECESSARY, REPLACE IT. OWNER NOTIFICATION BEGAN AUGUST 29, 2003. OWNERS SHOULD CONTACT FORD AT 1-800-392-3673.
TIRE DESCRIPTION: FIRESTONE WILDERNESS AT, SIZE P235/75R15, PRODUCED AT THE DECATUR, ILLINOIS TIRE PLANT AND ALL FIRESTONE RADIAL ATX AND RADIAL ATX II TIRES, SIZE P235/75R15. OPERATION OF THESE TIRES AT LOW INFLATION PRESSURES, HIGH SPEED, AND IN HOT WEATHER, CAN CONTRIBUTE TO SEPARATION OF THE TIRE TREAD. Remedy: THE REPLACEMENT/REIMBURSEMENT PROGRAM FOR THIS CAMPAIGN EXPIRED ON AUGUST 29, 2001. HOWEVER, CUSTOMERS SHOULD CONTACT FIRESTONE CUSTOMER SERVICE AT 1-800-465-1904 FOR POSSIBLE ASSISTANCE.
ON CERTAIN SPORT UTILITY VEHICLES EQUIPPED WITH HIGH BACK SEATS, THE UPPER BOLT ON THE DRIVER'S SIDE HIGH BACK SEAT, THAT ATTACHES THE SEAT RECLINER MECHANISM TO THE SEAT BACK FRAME, COULD FRACTURE. IF THE BOLT FRACTURES AND DOES NOT JAM IN THE SEAT BACK FRAME, THE SEAT BACK MAY RECLINE UNTIL IT MAKES CONTACT WITH AN OBJECT BEHIND THE SEAT, SUCH AS THE SECOND ROW SEAT CUSHION. Remedy: DEALERS WILL REPLACE THE DRIVER SEAT UPPER BOLT WITH A METAL SPACER AND BOLT. IN ADDITION, SEATS WITH TUBULAR BACK FRAMES WILL HAVE THE FULLY THREADED LOWER RECLINER BOLT REPLACED WITH A PARTIALLY THREADED BOLT. OWNER NOTIFICATION BEGAN ON AUGUST 29, 2003. OWNERS SHOULD CONTACT FORD AT 1-800-392-3673.
THIS IS NOT A SAFETY RECALL IN ACCORDANCE WITH THE SAFETY ACT. HOWEVER, IT IS DEEMED A SAFETY IMPROVEMENT CAMPAIGN BY THE AGENCY. EQUIPMENT DESCRIPTION: FORD IS REPLACING ALL FIRESTONE WILDERNESS AT 15, 16, AND 17 INCH TIRES MOUNTED ON FORD TRUCKS AND SUVS. FORD REPORTS TREAD SEPARATION CAN OCCUR DUE TO A COMBINATION OF THE SENSITIVITY OF THE TIRE DESIGN TO STRESS, AGING, AND MANUFACTURING DIFFERENCES BETWEEN PLANTS. FORD IS REPLACING THESE TIRES TO PREVENT POSSIBLE PREMATURE TIRE FAILURE. VEHICLE DESCRIPTION: THE VEHICLES LISTED BELOW MAY HAVE BEEN ORIGINALLY EQUIPPED WITH FIRESTONE WILDERNESS AT TIRES OR MAY HAVE HAD WILDERNESS AT TIRES INSTALLED DURING THE FIRESTONE RECALL LAUNCHED IN AUGUST 2000. CERTAIN 1991 THROUGHT 2002 FORD EXPLORER CERTAIN 2001 THROUGHT 2002 EXPLORER SPORT, AND SPORT TRAC CERTAIN 1997 THROUGH 2002 MERCURY MOUNTAINEER CERTAIN 1991 THROUGH 2001 RANGER CERTAIN 1999 THROUGH 2001 EXPEDITION CERTAIN 1991 THROUGH 1994, AND 1997 MODEL YEAR F-SERIES CERTAIN 1991 THROUGH 1994 BRONCO NOTE: BOTH ORIGINAL EQUIPMENT AND REPLACEMENT TIRES ARE AFFECTED. Remedy: THE REPLACEMENT/REIMBURSEMENT PROGRAM FOR THIS CAMPAIGN EXPIRED ON MARCH 31, 2002. HOWEVER, CUSTOMERS CAN CONTACT FORD AT 1-877-917-3673 OR GO ON-LINE TO WWW.FORD.COM FOR POSSIBLE ASSISTANCE.
VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE RIGHT FRONT BRAKE LINE TO THE HYDRAULIC CONTROL UNIT (HCU) CONNECTION COULD SEPARATE CAUSING THE LINE TO LEAK WHEN THE BRAKE PEDAL IS APPLIED. Remedy: DEALERS WILL REPLACE THE FLARE NUT ON THE BRAKE LINE.
VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE SECONDARY HOOD LATCH MAY CORRODE AT THE LATCH PIVOT AND STICK IN THE OPEN POSITION. Remedy: DEALERS WILL INSTALL A SECONDARY HOOD LATCH WITH COMPONENTS THAT ARE COATED PRIOR TO ASSEMBLY FOR IMPROVED LATCH PIVOT CORROSION PROTECTION.
VEHICLE DESCRIPTION: CERTAIN 1997-1999 RHD EXPLORER EQUIPPED WITH 4.0L OHV/SOHC ENGINES AND CRUISE CONTROL BUILT FROM MAY 29, 1996 THROUGH MARCH 4, 1999; 1998-1999 EXPLORER/MOUNTAINEERS EQUIPPED WITH 4.0L OHV/SOHC OR 5.0L ENGINES OR 1998-1999 RANGERS EQUIPPED WITH 2.5L, 3.0L FFV/EFI OR 4.0L ENGINES AND CRUISE CONTROL BUILT FROM JANUARY 5, 1998 THROUGH MARCH 4, 1999; 1998-1999 MUSTANGS EQUIPPED WITH 3.8L, 4.6L 2-VALVE OR 4-VALVE ENGINES AND CRUISE CONTROL BUILT FROM MARCH 2, 1998 THROUGH MARCH 4, 1999; 1999 F250/F350/F450/F550 (OVER 8,500 LBS.) TRUCKS EQUIPPED WITH 5.4L OR 6.8L ENGINES AND CRUISE CONTROL BUILT FROM MARCH 2, 1998 THROUGH MARCH 4, 1999; AND 1999 F-53 STRIPPED CHASSIS EQUIPPED WITH 5.4L OR 6.8L ENGINES AND CRUISE CONTROL BUILT FROM MARCH 2, 1998 THROUGH MARCH 4, 1999. A CRUISE CONTROL CABLE CAN INTERFERE WITH THE SPEED CONTROL SERVO PULLEY AND NOT ALLOW THE THROTTLE TO RETURN TO IDLE WHEN DISENGAGING THE CRUISE CONTROL. Remedy: DEALERS WILL REPLACE THE CRUISE CONTROL CABLES. AT THE PRESENT TIME, THE REPLACEMENT CABLES ARE NOT AVAILABLE. CUSTOMERS ARE BEING ADVISED NOT TO USE THE CRUISE CONTROL SYSTEM UNTIL A REPLACEMENT CAN BE MADE.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
On certain vehicles, the speed control deactivation switch may overheat, smoke, or burn, potentially resulting in an underhood fire. The condition may occur either when the vehicle is parked or when it is in operation. Correction: Dealers will install a new switch or fused wiring harness. Note: This is an expansion of recall 2005028 (05S28) for vehicles not previously included in the campaign.
On certain vehicles, the speed control deactivation switch may overheat, smoke, or burn, potentially resulting in an underhood fire. The failure mode appears to be different than that of Recall 2005028 (05S28). This time, the concern is with long term durability performance issues causing the switch to fail. Correction: Initially as an interim repair, owners will be instructed to return their vehicles to their dealers to have the speed control deactivation switch disconnected. As soon as replacement parts are available, owners will be instructed to return to the dealers for installation of a fused wiring harness designed to eliminate the potential risk of fire.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
On certain Explorer, Explorer Sport and Explorer Sport Trac vehicles, the upper bolt on the driver's high back seat that attaches the seat recliner mechanism to the seat back frame could fracture. If this happens, the seat back may recline until it makes contact with an object behind the seat, such as the 2nd row seat cushion. The occupant could potentially lose contact with the steering wheel or foot pedals during such an event. Correction: Dealer will replace the driver's seat upper bolt.
On certain Explorer, Explorer Sport and Explorer Sport Tract vehicles, the speed control cable strand cover could impact the conduit end fitting during speed control engagement. Repeated instance of this may result in flaring the cover end causing a binding condition when speed control is disengaged. Drivers may experience a high idle or a condition where it would appear speed control would not disengage. Braking function would be maintained though stopping distances may be increased. Correction: Dealer will replace the speed control cable.
On certain Explorer, Explorer Sport and Explorer Sport Trac vehicles, the upper bolt on the driver's high back seat that attaches the seat recliner mechanism to the seat back frame could fracture. If this happens, the seat back may recline until it makes contact with an object behind the seat, such as the 2nd row seat cushion. The occupant could potentially lose contact with the steering wheel or foot pedals during such an event. Correction: Dealer will replace the driver's seat upper bolt.
On certain vehicles, the Powertrain Control Module may allow the vehicle to exceed the design intent top speed. At these extreme speeds. the vehicle may be capable of exceeding the speed rating of the tires. This could lead to tire failure and at these extreme speeds, may result in a crash. Correction: Powertrain Control Module will be reprogrammed with the latest calibration.
On certain vehicles, the generic electronic module (GEM) may experience a condition referred to as "lock-up" in which the GEM controlled functions (front windshield wipers, interior lights, 4X4 system etc.) could not be turned ON or, in some cases if the function in ON, it could not be turned OFF. During this lock-up condition, these functions remain in their last known operating mode and do not respond to driver commands until electrical power is interrupted to the GEM. An inoperative front windshield wiper system could adversely affect driver visibility. Correction: Dealers will install a resistor in the GEM circuit which will prevent the electronic noise on the diagnostic link from affecting the GEM during vehicle operation.
On certain vehicles, the secondary hood latch may corrode at the latch pivot and stick in the open position. If this occurs and the primary hood latch is either not engaged or is released, a hood fly-up may occur. If this occurs, the driver's forward vision could be obstructed, which could result in a collision. Correction: Dealers will install a secondary hood latch with components that are coated prior to assembly for improved latch pivot corrosion protection.
On certain vehicles, the right front brake line attachment to the ABS hydraulic control unit (HCU) may separate from the HCU. This may be due to an incorrect seat angle on the flare nut that is part of the brake line assembly. If this occurs, it could result in a loss of brake pressure to the front wheels and increased stopping distances which could in turn result in a vehicle crash. Correction: The flare nut on the brake line will be replaced with the correct nut.
On certain vehicles, the speed control cable may interfere with the speed control servo pulley and not allow the throttle to return to idle when disengaging the speed control. If the speed control is used and this condition is present, a stuck throttle could result, which could potentially cause an accident. By not using speed control, this condition will not occur. Correction: Vehicles will be inspected and, if required, speed control cable will be replaced.