Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 1999 Hyundai Sonata, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
HYUNDAI IS RECALLING 188,282 MY 2001-2004 SONATA AND MY 2001-2004 XG300 AND XG350 VEHICLES ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, DELAWARE, ILLINOIS, INDIANA, IOWA, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WEST VIRGINIA, WISCONSIN, AND THE DISTRICT OF COLUMBIA. ROAD SALT APPLIED IN THESE JURISDICTIONS DURING THE WINTER MONTHS MAY RESULT IN PROGRESSIVE, INTERNAL CORROSION OF THE FRONT SUB-FRAME ON THE VEHICLES, AND MAY RESULT IN THINNING OR PERFORATION OF THE SUB-FRAME STEEL. THE CORROSION IS FREQUENTLY VISIBLE AND OFTEN DISCOVERED DURING INSPECTION OR ROUTINE MAINTENANCE, AND OWNERS MAY ALSO HEAR NOISES OR NOTICE TIRE MISALIGNMENT AND STEERING PULL. IF THESE SIGNALS ARE UNDETECTED OR UNHEEDED, THE CORROSION MAY PROGRESS AND THE FORWARD MOUNTING OF THE LOWER CONTROL ARM MAY DETACH FROM THE SUB-FRAME. Remedy: DEALERS WILL MEASURE THE THICKNESS OF THE FRONT SUB-FRAME AND INSPECT THE FRONT SUB-FRAME FOR CORROSION DAMAGE AND, IF NECESSARY, THE FRONT SUB-FRAME WILL BE REPLACED WITH A NEW SUB-FRAME THAT INCORPORATES ADDITIONAL HOLES IN THE UPPER AND LOWER PANELS. IF THE FRONT SUB-FRAME DOES NOT REQUIRE REPLACEMENT, THE DEALER WILL ADD DRAINAGE HOLES TO THE SUB-FRAME AND WILL TREAT THE SUB-FRAME WITH RUST-PROOFING MATERIAL TO STOP THE CORROSION PROCESS. THIS PROCEDURE WILL BE PERFORMED FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN DURING APRIL 2009. OWNERS MAY CONTACT THE HYUNDAI CUSTOMER ASSISTANCE CENTER AT 1-800-633-5151.
VEHICLE DESCRIPTION: SOME SONATA VEHICLES EQUIPPED WITH 2.5 LITER V-6 ENGINES AND ALL ELANTRA MODEL VEHICLES MAY HAVE EXPERIENCED INTERMITTENT LOW-SPEED ENGINE STALLING, WHICH COULD OCCUR IF THE MAF (MASS AIR FLOW) SENSOR ELECTRICAL SIGNAL IS INTERRUPTED AS A RESULT OF ENGINE VIBRATION TRANSMITTED TO THE MAF SENSOR CONNECTOR WIRING HARNESS. Remedy: DEALERS WILL RE-ROUTE THE MAF SENSOR CONNECTOR WIRING HARNESS.
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE SUPPLEMENTAL RESTRAINT SYSTEM (SRS) AIR BAG WARNING LIGHT COULD ILLUMINATE DUE TO MOTION OF THE SIDE IMPACT AIR BAG WIRING HARNESS AND SIDE IMPACT AIR BAG WIRING HARNESS CONNECTOR THAT MOUNT TO THE ADJUSTABLE SEAT CUSHION ASSEMBLY. THIS CONDITION ONLY RELATES TO THE DRIVER AND/OR PASSENGER SEAT-MOUNTED SIDE IMPACT AIR BAG(S). Remedy: DEALERS WILL MORE SECURELY FASTEN THE FRONT SEAT SIDE IMPACT AIR BAG WIRING HARNESS AND CONNECTORS TO THE VEHICLE'S FRONT SEAT CUSHION FRAMES. OWNER NOTIFICATION WILL OCCUR IN SIX MAILINGS ON MAY 27, JUNE 3, JUNE 10, JUNE 17, JUNE 24, AND JULY 1, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HYUNDAI AT 1-800-633-5151.
ON CERTAIN PASSENGER VEHICLES, AN INTERMITTENT CONDITION THAT LEADS TO THE SUPPLEMENTAL RESTRAINT SYSTEM (SRS) AIR BAG WARNING LIGHT ILLUMINATION COULD RESULT FROM MOTION OF THE SIDE IMPACT AIR BAG WIRING HARNESS AND SIDE IMPACT AIR BAG WIRING HARNESS CONNECTOR WHICH MOUNT TO THE ADJUSTABLE SEAT CUSHION ASSEMBLY. THIS CONDITION ONLY RELATES TO THE SIDE IMPACT AIR BAGS AND COULD PREVENT AIR BAG DEPLOYMENT DURING A CRASH WHERE SUCH DEPLOYMENT SHOULD OCCUR. Remedy: DEALERS WILL MORE SECURELY FASTEN THE SIDE IMPACT AIR BAG WIRING HARNESSES AND CONNECTORS TO THE VEHICLE'S FRONT SEAT CUSHION FRAMES. OWNER NOTIFICATION BEGAN MAY 28, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HYUNDAI AT 1-800-633-5151.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain vehicles operated in areas of heavy road salt usage (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island, and Newfoundland & Labrador), road salt can collect in the rear portion of the side members of the subframe and may result in internal corrosion leading to thinning or perforation of the subframe steel. The corrosion may ultimately lead to separation of the lower control arm at the forward mounting point to the subframe. When separation occurs, in most cases, the movement of the arm will cause the axle to pull out of the transaxle and the vehicle will no longer have drive power to the wheels. In extreme cases, the wheel can also rotate off its designed axis and make contact with the fender or the wheel well. Both outcomes could result in a loss of vehicle control and a crash causing property damage, personal injury or death. Correction: Dealers will inspect and, if necessary, replace the front subframe assembly. Should the subframe not require replacement, drainage holes will be added, as well as treatment with rust-proofing material to arrest the corrosion process.
Certain Sonata GLS vehicles. The SRS air bag warning light could illuminate. The intermittent condition that leads to SRS warning light illumination related with codes b 1378 or b 1382 could result from unusual motion of the side impact air bag wiring harness and side impact air bag wiring harness connector which mount to the adjustable seat cushion assembly. This condition only relates to the driver and/or passenger seat mounted side impact air bag (s). Correction: dealers will service the front seat side impact air bag wiring harness.
Certain vehicles equipped with a 2.5 litre V6 engine may experience intermittent low speed stalling if the Mass Air FLow (MAF) Sensor id interrupted as a result of engine vibration transmitted to the MAF Sensor wiring harness. Intermittent low speed engine stalling may result in a crash. Correction: MAF Sensor connector wiring harness will be re-routed and a new wiring harness clamp will be installed. Corrosion inhibiting lubricant will be applied to female MAF connector terminals and the ECM will be reprogrammed.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain