Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2000 Buick Century, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
DORMAN IS RECALLING 979 STEERING KNUCKLES, DORMAN P/NOS. 697-902 AND 697-903, SOLD UNDER DORMAN'S "OE SOLUTIONS<SUP>TM</SUP>" BRAND NAME, AND NAPA P/NOS. 7-8502 AND 7-8503 WHICH WERE SOLD FOR REPLACEMENT USE ON THE VARIOUS VEHICLES LISTED ABOVE. A POTENTIAL MATERIAL OR DESIGN DEFECT COULD RESULT IN THE STEERING KNUCKLE BREAKING IN THE HUB AREA. Remedy: DORMAN WILL NOTIFY OWNERS AND REPLACE THE DEFECTIVE STEERING KNUCKLES FREE OF CHARGE AND REIMBURSE THE REPAIR FACILITY OR OWNER FOR LABOR. THE RECALL BEGAN ON FEBRUARY 23, 2009. OWNERS MAY CONTACT DORMAN'S TOLL-FREE HOTLINE AT 1-800-523-2492 AND PRESS 5.
CERTAIN DELPHI FUEL PRESSURE REGULATORS, P/NOS. FP10020-11B1, FP10026-11B1, AND FP10027-11B1, SOLD AFTER JANUARY 9, 2007, AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES LISTED ABOVE. THE UNIVERSAL PRESSURE REGULATORS (UPR) WERE PRODUCED WITHOUT AN O'RING AND RETAINER. Remedy: DELPHI WILL NOTIFY OWNERS AND REPLACE THE UPR FREE OF CHARGE. THE RECALL BEGAN ON APRIL 23, 2007. OWNERS CAN CONTACT DELPHI AT 877-411-8770.
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE CLAMP THAT SECURES THE FLEXIBLE FUEL FILL HOSE TO THE METAL FILL TUBE MAY BE LOOSE AND COULD SEPARATE. Remedy: DEALERS WILL INSPECT THE FUEL HOSE FILL NECK CLAMP AND, IF NECESSARY, REPOSITION AND TIGHTEN THE CLAMP.
VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES, EQUIPPED WITH SUNVISOR LOCATED AIR BAG LABELS, FAIL TO CONFORM TO FEDERAL MOTOR VEHICLES SAFETY STANDARD NO. 208, "OCCUPANT CRASH PROTECTION." THESE VEHICLES HAVE A MESSAGE AREA LESS THAN 30 CM WHICH DOES NOT MEET THE REQUIREMENTS OF THE STANDARD. Remedy: GM WILL MAIL A NEW BILINGUAL AIR BAG LABEL WITH INSTALLATION INSTRUCTIONS. HOWEVER, THE CUSTOMER MAY BRING THE LABEL TO THEIR DEALER FOR INSTALLATION FREE OF CHARGE. OWNER NOTIFICATION BEGAN MAY 4, 2001. OWNERS WHO DO NOT RECEIVE THE FREE LABEL AND INSTALLATION INSTRUCTIONS WITHIN A REASONABLE TIME SHOULD CONTACT OLDSMOBILE AT 1-800-442-6537 OR BUICK AT 1-800-521-7300.
VEHICLE DESCRIPTION: PASSENGER VEHICLES. SOME OF THESE VEHICLES EXHIBIT A CONDITION IN WHICH THE DRIVER SIDE IMPACT AIR BAG INFLATOR SEPARATES FROM THE AIR BAG MODULE DURING DEPLOYMENT. Remedy: DEALERS WILL REPLACE THE SIDE IMPACT AIR BAG MODULE.
VEHICLE DESCRIPTION: PASSENGER VEHICLES, LIGHT DUTY TRUCKS, SPORT UTILITY VEHICLES, AND MINI VANS EQUIPPED WITH TRW SEAT BELT BUCKLE ASSEMBLIES. THE BUCKLE BASE OF THESE SEAT BELT ASSEMBLIES WERE NOT PROPERLY HEAT TREATED AND THEREFORE DO NOT PASS THE LOAD BEARING REQUIREMENT OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 209, "SEAT BELT ASSEMBLIES." Remedy: DEALERS WILL INSPECT THE VEHICLE'S SAFETY BELT BUCKLE ASSEMBLY DATE CODES AND, IF NECESSARY, WILL REPLACE ANY SAFETY BELT BUCKLE ASSEMBLY.
VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH REAR DRUM BRAKES. THE BOLT HEAD(S) ON THE REAR SPINDLE ROD CAN SEPARATE. Remedy: DEALERS WILL REPLACE THE REAR SPINDLE BOLTS.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Certain vehicles do not comply with the requirements of C.M.V.S.S. 209 - Seat Belt Assemblies. Vehicles may have seat belt assemblies that will not withstand the force requirements of the standard. In a crash, if the belt buckle fails, there is an increased risk of injury to the occupant. Correction: Suspect buckle assemblies will be replaced.
Certain vehicles do not comply with the requirements of CMVSS 301 - Fuel System Integrity. The clamp that secures the flexible fuel fill hose to the metal fuel fill tube may be loose and could separate in a crash or rollover. In the presence of an ignition source, a fire could result. Correction: Fuel hose fill neck clamp will be inspected and if necessary, the clamp will be repositioned and tightened.
Certain vehicles equipped with rear drum brakes may exhibit a condition in which the bolt head(s) on the rear spindle rod may separate. There may be a noticeable rattle in the rear suspension. If the remaining portion of the bolt breaks, the wheel can shift, causing rear steering of the vehicle. This could cause the driver to lose control and a crash could occur without prior warning. Correction: Dealers will replace the rear spindle rod bolts on affected vehicles.
Certain vehicles do not comply with the requirements of CMVSS. 1105 - Evaporative Emissions. Vehicles may have an OBD-II (On Board Diagnostics) calibration that causes a false evaporative emission system code to set under certain conditions, resulting in Malfunction Indicator Lamp (MIL) illumination. Correction: Dealers will reflash the vehicle PCM (Power Control Module) with new calibration software.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain