Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2000 Chrysler Concorde, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS. Remedy: SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.
ON CERTAIN PASSENGER VEHICLES, SEAT BACK RECLINER BOLT BREAKAGE CAN OCCUR RESULTING IN THE SEAT BACK RECLINING UNEXPECTEDLY. Remedy: DEALERS WILL REPLACE THE RECLINER BOLTS. OWNER NOTIFICATION BEGAN ON APRIL 23, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE SEAT BELT SHOULDER HEIGHT ADJUSTABLE TURNING LOOP (ATL) TOP MOUNTING BOLT WAS INADEQUATELY MANUFACTURED. Remedy: DEALERS WILL REPLACE THE SHOULDER BELT HEIGHT ADJUSTER MOUNTING BOLTS.
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE MOLDING FLASH ON THE PRIMARY LEVER MAY PREVENT THE OPERATION OF THE G-LOCK AND TILT LOCK FUNCTIONS ON SOME OF THE DRIVER'S SIDE RETRACTORS. Remedy: DEALERS WILL REPLACE THE LEFT FRONT RETRACTOR ASSEMBLIES.
VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES, PICKUP TRUCKS AND SPORT UTILITY VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 225, "CHILD RESTRAINT ANCHORAGE SYSTEMS." SOME OF THE OWNER'S MANUALS FOR THESE VEHICLES ARE MISSING INSTRUCTIONS THAT PROVIDE A STEP-BY-STEP PROCEDURE, INCLUDING DIAGRAMS, FOR PROPERLY ATTACHING A CHILD RESTRAINT SYSTEM'S TETHER STRAP TO THE TETHER ANCHORAGE. Remedy: OWNERS WILL BE PROVIDED WITH AN ADDENDUM TO THE OWNER'S MANUALS.
VEHICLE DESCRIPTION: NON-ABS EQUIPPED PASSENGER VEHICLES. THE BRAKE MASTER CYLINDER PISTON RETAINER SNAP RING MAY HAVE BEEN BENT INWARD DURING THE ASSEMBLY PROCESS. THE MASTER CYLINDER PISTON MAY BE IN A "BRAKE APPLIED" POSITION DUE TO THE DAMAGED PISTON RETAINER SNAP RING. WHEN THE PISTON IS IN THE APPLIED POSITION, THE FLUID COMPENSATION PORTS ARE CLOSED WHICH RESULTS IN A BRAKE DRAG CONDITION. Remedy: DEALERS WILL REPLACE THE BRAKE MASTER CYLINDER.
VEHICLE DESCRIPTION: PASSENGER AND SPORT UTILITY VEHICLES. THE PASSENGER AIR BAG INFLATOR ASSEMBLY CONTAINS AN INCORRECT INFLATOR CHARGE AMOUNT. Remedy: DEALERS WILL REPLACE THE AIR BAG MODULE WITH A CORRECT MODULE.
VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES (NON-SUNROOF ONLY) FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 201, "OCCUPANT PROTECTION IN INTERIOR IMPACT." Remedy: OWNERS WILL BE SENT A STORAGE BIN ACCESSORY UNIT THAT CAN BE ATTACHED TO THE B-PILLAR ALONG WITH INSTALLATION INSTRUCTIONS. HOWEVER, IF AN OWNER WISHES, THE DEALER CAN PERFORM THE INSTALLATION. OWNER NOTIFICATION BEGAN DECEMBER 17, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain vehicles, the driver seat recliner bolts could break which would allow the seat back to recline unexpectedly while the vehicle is in motion. Correction: Dealer will replace the recliner bolts with new shoulder bolt and, for vehicles with power driver seats built through January 2000, the recliner tracks will be realigned and a longer recliner driveshaft will be installed to prevent disengagement.
On certain vehicles, the brake master cylinder piston retainer snap ring may have been bent inward during the assembly process. The master cylinder piston may be in the "brake applied" position due to the damaged snap ring. When the piston is in the applied position, the fluid compensation ports are closed which results in a brake drag condition which could cause brake system overheating, brake fade and increased stopping distance. Correction: Master cylinder will be replaced.
On certain vehicles, the molding flash on the primary lever may prevent operation of the deceleration lock and tilt lock functions of the driver's side retractor. If this should occur in a frontal crash situation, driver protection from the seat belt may be reduced, increasing the risk of injury. Correction: Left front retractor assemblies will be replaced on affected vehicles.
On certain vehicles, the adjustable turning loop on the shoulder belt top mounting bolt may have been manufactured with a core hardness that exceeds the specification for this type of application. Due to the excessive core hardness, these mounting bolts may not withstand the force required to function properly in certain impact situations, increasing the risk of injury to a belted occupant. Correction: The upper adjustable turning loop bolt will be replaced with a bolt of proper hardness.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, the passenger side air bag inflator assembly contains an incorrect inflator charge. This condition could increase the risk of a passenger occupant injury in the event of a crash. Correction: Passenger air bag modules will be replaced.