Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2001 Cadillac Deville, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
This defect can affect the safe operation of the airbag system. Until this recall is performed, customers should remove all items from their key rings, leaving only the ignition key. The key fob (if applicable), should also be removed from the key ring. General Motors LLC (GM) is recalling certain model year 2005-2009 Buick LaCrosse, 2006-2011 Buick Lucerne, 2000-2005 Cadillac DeVille, 2006-2011 Cadillac DTS, 2006-2014 Chevrolet Impala, and 2006-2007 Chevrolet Monte Carlo vehicles. In the affected vehicles, the weight on the key ring and road conditions or some other jarring event may cause the ignition switch to move out of the run position, turning off the engine. Remedy: GM will notify owners, and dealers will install two key rings and an insert in the key slot or a cover over the key head on all ignition keys, free of charge. The recall began on September 23, 2014. Owners may contact General Motors customer service at 1-800-521-7300 (Buick), 1-800-458-8006 (Cadillac), and 1-800-222-1020 (Chevrolet). GM's number for this recall is 14299.
VEHICLE DESCRIPTION: PASSENGER VEHICLES, HEARSE, AND LIMOUSINES. SOME OF THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 209, "SEAT BELT ASSEMBLIES." THESE VEHICLES HAVE SEAT BELTS THAT MAY NOT MEET THE 30-POUND PUSH BUTTON RELEASE EFFORT REQUIREMENT OF THE STANDARD. Remedy: DEALERS WILL INSPECT THE SEAT BELTS AND, IF NECESSARY, MODIFY THE LATCH PLATES OR REPLACE THE RETRACTOR. DEALERS WILL ALSO ADD "SNAP ON" LATCH CLIPS TO ELIMINATE THE POTENTIAL OF INVERTED LATCH PLATE INSERTION. OWNER NOTIFICATION IS BEING CONDUCTED IN PHASES. THE FIRST PHASE BEGAN MAY 29, 2001, AND THE SECOND PHASE BEGAN JULY 6, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CADILLAC AT 1-800-458-8006.
CERTAIN PASSENGER VEHICLES CONTAIN DRIVER AND FRONT PASSENGER LAP AND/OR SHOULDER BELT RETRACTORS THAT MAY NOT REMAIN LOCKED UP AS DESIGNED DURING A CRASH IN WHICH THE BELT PRETENSIONERS DEPLOY. Remedy: DEALERS WILL INSTALL A RETAINER KIT IN THE DRIVER AND PASSENGER SAFETY BELT PRETENSIONER. OWNER NOTIFICATION BEGAN JANUARY 31, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CADILLAC AT 1-800-458-8006.
VEHICLE DESCRIPTION: CERTAIN SEDANS, HEARSE, AND LIMOUSINE VEHICLES FAIL TO COMPLY WITH REQUIREMENTS OF FMVSS NO. 201, "OCCUPANT PROTECTION IN INTERIOR IMPACT." THESE VEHICLES HAVE SUNVISOR CENTER SUPPORTS WITH CERTAIN RADII LESS THAN THE 3.2MM REQUIRED BY THE STANDARD. Remedy: DEALERS WILL REPLACE THE SUNVISOR CENTER SUPPORTS WITH REDESIGNED SUPPORTS. OWNER NOTIFICATION BEGAN NOVEMBER 28, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CADILLAC AT 1-800-458-8006.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain vehicles, a defect in the ignition switch could allow the switch to move out of the "run" position if the key ring is carrying added weight or the vehicle goes off-road or is subjected to some other jarring event. If this were to occur, engine power, power steering and power braking would be affected, increasing the risk of a crash causing injury and/or damage to property. The timing of the key movement out of the “run” position, relative to the activation of the sensing algorithm of the crash event, may also result in the airbags not deploying in a subsequent collision, increasing the risk of injury. Correction: For each key, dealers will install two key rings and modify the key ring opening shape. Note: Until the correction is performed, all items should be removed from the key ring.
On certain vehicles, the driver and/or front passenger lap and/or shoulder belt retractors may not lock up or remain locked up as designed during a crash in which the belt pretensioners deploy. In such a crash, this could result in an increased chance of injury for that occupant. Correction: The dealers will replace the driver and passenger pretensioners.
Certain passenger vehicles fail to comply with requirements of CMVSS 201, "Occupant Protection in Interior Impact." These vehicles have sun visor center supports less than the 3.2mm required by the standard. Correction: Dealers will replace the left and right sun visor center supports
Certain vehicles do not comply with the requirements of CMVSS 110 - Tire Selection and Rims. On the tire placard, the tire size designation is incomplete and the tire speed rating is wrong. Correction: Dealers will install a new tire pressure label on affected vehicles.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
Certain vehicles do not comply with the requirements of CMVSS 209 - Seat Belt Assemblies. The push button release effort for the front outboard seat belts exceeds the maximum of 14 kilograms (30 pounds). After a crash, the higher release efforts could make it more difficult for an occupant to release the belt and exit the vehicle. Correction: Dealer will add "snap on" latch clips to eliminate the potential of inverted latch plate insertion. Dealers will inspect the seat belts and, if necessary, modify the latch plates with a special tool or replace the retractor.