Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2002 Honda GL1800, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
ON CERTAIN MOTORCYCLES, THE BANK ANGLE SENSORS DESIGNED TO SHUT OFF THE FUEL PUMP AND THE ENGINE ELECTRICAL POWER IN THE EVENT THE MOTORCYCLE FALLS OVER, WERE INSTALLED USING THE WRONG SIZE SCREWS ALLOWING THE SCREWS TO EVENTUALLY DETACH FROM THEIR MOUNTING POINT. Remedy: DEALERS WILL INSPECT THE MOUNTING SCREW SIZE AND, IF NECESSARY, INSTALL SCREWS OF THE CORRECT SIZE. OWNER NOTIFICATION BEGAN DECEMBER 23, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HONDA AT 1-800-289-8226.
ON SOME MOTORCYCLES, CERTAIN FRAME WELDS DO NOT MEET MANUFACTURING SPECIFICATIONS. HIGH LOADS CREATED WHEN RIDING ON ROUGH ROAD SURFACES OR THROUGH POTHOLES CAN CAUSE THE AFFECTED WELDS TO CRACK. Remedy: DEALERS WILL INSPECT AND REINFORCE THE WELDS ON ALL FRAMES. OWNER NOTIFICATION BEGAN DURING OCTOBER 2003. OWNERS SHOULD CONTACT HONDA AT 1-866-784-1870.
HONDA IS RECALLING CERTAIN MODEL YEAR 2001-2010, AND MODEL YEAR 2012 GL1800 GOLDWING MOTORCYCLES. UNDER CERTAIN CONDITIONS, THERE IS A POSSIBILITY THAT THE COMBINED BRAKING SYSTEM'S SECONDARY MASTER CYLINDER MAY CAUSE THE REAR BRAKE TO DRAG. Remedy: HONDA WILL NOTIFY OWNERS, AND DEALERS WILL INSPECT THE SECONDARY MASTER CYLINDER AND IF NECESSARY, REPLACE IT, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JANUARY 6, 2012. OWNERS MAY CONTACT HONDA CUSTOMER SERVICE AT 1-866-784-1870.
American Honda Motor Co., Inc. (Honda) is recalling certain model year 2001-2010 and 2012-2015 GL1800, 2001-2005 GL1800A and 2013-2015 GL1800B motorcycles. The rear brakes of the affected motorcycles may drag after the brakes are released. Remedy: Honda will notify owners, and dealers will replace the secondary brake master cylinder and the rear brake master cylinder, and flush the brake fluid, free of charge. The recall began on December 7, 2015. Owners may contact Honda customer service at 1-866-784-1870. Honda's number for this recall is JV6. Note: This recall supercedes recall 14V-472.
KURYAKYN IS RECALLING CERTAIN AFTERMARKET PASSENGER FLOORBOARD MOUNTS, PART NUMBER 607005, SOLD AND INSTALLED FOR USE ON 2001-2012 HONDA GL 1800 (GOLDWING) MOTORCYCLES. THIS MOUNT WAS SOLD ON KURYAKYN 'TRANSFORMER' PASSENGER FLOORBOARD SETS, PART NUMBER 7005 FROM SEPTEMBER 15, 2008, TO PRESENT. THE FLOORBOARD MOUNT MAY CRACK AND BREAK FREE FROM THE MOUNTING BOLTS THAT SECURE THE MOUNT TO THE MOTORCYCLE. Remedy: KURYAKYN WILL NOTIFY OWNERS AND PROVIDE REPLACEMENT MOUNT KITS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JANUARY 13, 2012. OWNERS MAY CONTACT KURYAKYN AT 1-866-296-4728.
ON SOME MOTORCYCLES, CERTAIN FRAME WELDS DO NOT MEET MANUFACTURING SPECIFICATIONS. HIGH LOADS CREATED WHEN RIDING ON ROUGH ROAD SURFACES OR THROUGH POTHOLES CAN CAUSE THE AFFECTED WELDS TO CRACK. Remedy: DEALERS WILL INSPECT AND, IF NECESSARY, REINFORCE THE WELDS ON 2001-2002 MOTORCYCLES FREE OF CHARGE. ON 2003-2004 MOTORCYCLES, THE UNITS WILL BE REPAIRED, NO INSPECTION WILL BE NECESSARY. THE RECALL BEGAN ON FEBRUARY 9, 2005. OWNERS MAY CONTACT HONDA AT 1-866-784-1870.
CERTAIN MOTORCYCLES EQUIPPED WITH COMBINED-BRAKE SYSTEMS HAVE A PROPORTIONING CONTROL VALVE (PCV) THAT MECHANICALLY PROPORTIONS BRAKE FORCE WHEN THE REAR BRAKE IS APPLIED. A SEAL IN SOME PCVS IS IMPROPERLY SHAPED, AND BRAKE FLUID LEAKAGE MAY OCCUR. Remedy: DEALERS WILL INSPECT THE REAR BRAKE FORLEAKAGE. IF LEAKAGE IS CONFIRMED, THE DEALER WILL REPLACE THE PCV FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 31, 2005. OWNERS MAY CONTACT HONDA AT 866-784-1870.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain motorcycles, the combined brake system's secondary master cylinder may cause the rear brakes to drag. Continued riding with the rear brake engaged/dragging may generate enough heat to cause the rear brake to catch fire. These issues could result in injury and/or property damage. Unexpected braking may also adversely affect vehicle stability, which could result in a crash. Correction: Dealers will replace the secondary master cylinder with one that has a modified check valve. In addition to replacing the secondary master cylinder, dealers will also replace the rear master cylinder and flush the brake fluid. Note: This recall supersedes recall 2014-326. All vehicles having been inspected and/or serviced under the previous recall will require re-inspection and repair.
On certain motorcycles, the combined brake system’s secondary master cylinder may cause the rear brakes to drag. Unexpected braking may adversely affect vehicle stability, which could result in a crash. As well, continued riding with the rear brake engaged/dragging may generate enough heat to cause the rear brake to catch fire. These issues could result in property damage and/or personal injury. Note: This recall is superseded by recall 2015488.
On certain motorcycles, the combined brake system’s secondary master cylinder may cause the rear brakes to drag. Unexpected braking may adversely affect vehicle stability, which could result in a crash. As well, continued riding with the rear brake engaged/dragging may generate enough heat to cause the rear brake to catch fire. These issues could result in property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the secondary master cylinder with an updated version.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
On certain motorcycles, frame weld cracks could appear due to high loads created when riding on rough road surfaces or through potholes. In the worst case, the welded area could break, resulting in rear suspension collapse or lower cross member separation. Correction: Dealer will repair affected frames.