Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2003 Ford Crown Victoria, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Ford Motor Company (Ford) is recalling certain model year 2003-2005 Ford Crown Victoria and Mercury Grand Marquis vehicles manufactured October 3, 2001, to August 2, 2005. The affected vehicles have a lighting control module (LCM) that may fail, resulting in a loss of headlights. Remedy: Ford will notify owners, and dealers will replace the LCM, free of charge. The recall began April 14, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15S39.
CERTAIN AFTERMARKET FUEL FILTERS SOLD UNDER THE PUROLATOR BRAND NAME, P/N F65277, SHIPPED FROM JANUARY 16 THROUGH JUNE 2, 2006, FOR USE ON THE ABOVE LISTED PASSENGER VEHICLES. DUE TO INCORRECT DESIGN, THE QUICK CONNECTORS MAY NOT FULLY SEAT WITH THE TUBE INTERFACE, EVEN THOUGH THE PERSON MAKING THE CONNECTION MAY BELIEVE THAT THE QUICK CONNECTOR IS FULLY ATTACHED. Remedy: UFI WILL NOTIFY OWNERS AND REPLACE THE FILTERS FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 4, 2006. OWNERS MAY CONTACT UFI FILTERS USA AT 800-230-5876.
ON CERTAIN POLICE INTERCEPTORS (CVPI) AND COMMERCIAL HEAVY DUTY (TAXI) VEHICLES, AT EXTREMELY HIGH OPERATING TEMPERATURES, THE SOUND INSULATING PANEL, LOCATED UNDER THE VEHICLE POSITIONED BETWEEN THE EXHAUST SYSTEM AND THE UNDERBODY, COULD SAG AND POSSIBLY CONTACT THE SURFACE OF THE CATALYTIC CONVERTER. Remedy: DEALERS WILL REMOVE THE EXISTING DASH INSULATOR AND INSTALL A REVISED DESIGN INSULATOR PAD FREE OF CHARGE. THE RECALL BEGAN ON JUNE 3, 2005. OWNERS MAY CONTACT FORD AT 1-800-392-3673.
ON CERTAIN POLICE AND TAXI VEHICLES EQUIPPED WITH STEEL WHEELS, SOME OF THE WHEELS MAY DEVELOP CRACKS IN THE RIM NEAR THE WELD LINE THAT CONNECTS THE RIM TO THE DISK. Remedy: DEALERS WILL INSPECT AND REPLACE THE FOUR ROAD WHEELS AND SPARE WHEEL WITH THE MANUFACTURING DATE CODES OF AUGUST 18, 2001 THROUGH SEPTEMBER 22, 2002. IN ADDITION, FORD IS PROVIDING EXTENDED WARRANTY COVERAGE FOR WHEELS ON 2003 CROWN VICTORIA POLICE INTERCEPTOR AND TAXIS BUILT FROM OCTOBER 1, 2002 THROUGH APRIL 29, 2003. THESE WHEELS ARE EXHIBITING CRACKS AT A SUBSTANTIALLY LOWER RATE THAN THOSE WHEELS INCLUDED IN THE RECALL. OWNER NOTIFICATION BEGAN ON AUGUST 8, 2003. OWNERS SHOULD CONTACT FORD AT 1-800-392-3673.
IN ORDER TO ENHANCE POLICE OFFICE SAFETY, MODEL YEAR 1992-2003 CROWN VICTORIA POLICE INTERCEPTOR (CVPI) VEHICLES WILL BE EQUIPPED WITH SHIELDS DESIGNED TO HELP PROTECT THE FUEL TANK IN HIGH-SPEED REAR-IMPACT CRASHES. FORD ALSO WILL BE OFFERING AN OPTIONAL TRUNK PACKAGE DESIGNED TO IMPROVE THE SAFE TRANSPORT OF SHARP-EDGED, HEAVY EQUIPMENT IN THESE VEHICLES. Remedy: FORD HAS ADVISED US THAT SHIELD KITS HAVE BEEN AVAILABLE SINCE LATE OCTOBER AND WILL BE INSTALLED ON POLICE INTERCEPTOR VEHICLES AT NO COST. THE OPTIONAL TRANK PACKAGE WILL BE AVAILABLE BY THE END OF 2002. FORD HAS ESTABLISHED A NEW WEB SITE AT WWW.CVPI.COM TO ANSWER ADDITIONAL QUESTIONS ABOUT THE SAFE USE OF CPVI VEHICLES.
ON CERTAIN NATURAL GAS VEHICLES, IF A FLAME FROM A VEHICLE INTERIOR FIRE BECOMES LOCALLY DIRECTED AT THE NATURAL GAS FUEL TANK LOCATED IMMEDIATELY BEHIND THE REAR SEAT, THE FLAME COULD DAMAGE THE FIBERGLASS WRAP ON THE TANK WEAKENING THE TANK. Remedy: DEALERS WILL INSTALL AN INSULATOR BEHIND THE CURRENT SEAT BACK. OWNER NOTIFICATION BEGAN ON JANUARY 7, 2004. OWNERS SHOULD CONTACT FORD AT 1-800-392-3673.
CERTAIN POLICE, COMMERCIAL, AND PASSENGER VEHICLES SOLD TO FLEETS TYPICALLY INPUT HIGHER LOADS INTO THE VEHICLE CHASSIS OVERLOADING THE WHEEL BEARINGS AND AXLES. Remedy: DEALERS WILL REPLACE THE REAR WHEEL BEARINGS, SEALS,AND AXLE SHAFTS. THE RECALL BEGAN ON JULY 15, 2004. OWNERS SHOULD CONTACT FORD AT 1-800-392-3673.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain vehicles, a defect in the Lighting Control Module could cause the headlight high and low beams to become inoperative without warning, causing the headlights to revert to reduced-voltage daytime running light function. This would cause a reduction in lighting output, potentially increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the Lighting Control Module.
The wheels of certain Police Interceptor vehicles may crack, particularly when exposed to severe loading in high speed pursuit situations. Often cracked wheels can be identified as a result of slow air leaks, steering wheel nibble, or difficulty or inability to properly balance a wheel and tire assembly. In time, the cracks could propagate circumferentially and lead to sudden air loss, which could result in a loss of vehicle control and a crash. Correction: Dealers will replace the wheels.
On certain Police Interceptors and Commercial Heavy Duty (Taxi) vehicles, the dash outer sound insulator could sag and possibly contact the surface of the light-off catalyst. If this occurs, the insulator might experience charring of the outer layer, burning odour, or smoke which may result in a fire. Correction: Dealers will remove a section of the dash outer sound insulator above the light-off catalysts and replace that portion with a redesigned insulating material that has an aluminium outer layer and a full adhesive backing.
Certain Crown Victoria Police Interceptors, Crown Victoria commercial vehicles and Lincoln Town Car fleet vehicles. As opposed to civilian vehicles, the potentially affected vehicles typically input higher loads into the vehicle chassis, including the wheel bearings and axles, as a result of steering, suspension and tire design differences, as well as vehicle usage patterns and vehicle operating weight. The increased loading and/or weight these vehicles experience during their high duty cycles result in increased stress on the rear axle shafts and bearings. This may lead to early bearing failure and ultimately axle shaft fracture. In the event of axle shaft fracture, the vehicle would loose drive function and would coast to a stop. The wheel is likely to be retained in the wheel well by the brake caliper and brake rotor, and vehicle control is maintained. Correction: Dealers will replace rear wheel bearings, seals and axle shafts.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
On certain natural gas vehicles, in the rare circumstance that a flame from a vehicle interior fire becomes locally directed at the natural gas tank located immediately behind the rear seat, the locally directed flame could damage the fiberglass wrap on the tank thereby reducing the hoop strength of the tank. If the hoop strength is significantly compromised, the tank could rupture and potentially result in personal injury. Correction: Dealer will install an insulator behind the seat back.
On certain vehicles in police and taxi applications, the steel wheels could crack due to loads input to the wheels as a result of the unique tires and suspensions used. Correction: Dealer will replace the wheels that have a manufacturing date between August 18, 2001 and September 22, 2002.