Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2004 Freightliner Business Class M2, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
ON CERTAIN TRUCKS, INCORRECT SPRINGS WERE INSTALLED IN THE EXHAUST PORT OF CERTAIN AIR MANAGEMENT UNIT (AMU) SOLENOID VALVES AND THEY MAY NOT TURN OFF AFTER ACTUATION. Remedy: DEALERS WILL REPLACE THE AFFECTED VALVES. THE RECALL BEGAN JUNE 29, 2004. OWNERS SHOULD CONTACT FREIGHTLINER AT 1-800-547-0712.
ON CERTAIN TRUCKS EQUIPPED WITH MANUAL TRANSMISSION, THE TAPERED JOINT THAT ATTACHES THE SHIFTER TO THE TRANSMISSION MAY BECOME LOOSE MAKING IT DIFFICULT TO PUT THE TRANSMISSION INTO GEAR. Remedy: DEALERS WILL RE-SECURE THE SHIFT LEVER TO THE TRANSMISSION USING THREADLOCK AND RE-TORQUING THE FASTENING BOLT. OWNER NOTIFICATION BEGAN ON MAY 21, 2004. OWNERS SHOULD CONTACT FREIGHTLINER AT 1-800-547-0712.
CERTAIN MICHELIN XDE COMMERCIAL TRUCK TIRES, SIZE 10R22.5 LRG AND LRF FOR USE ON FREIGHTLINER SCHOOL AND TRANSIT BUSES. THESE TIRES WERE MANFACTURED BETWEEN MAY 23 AND OCTOBER 24, 2004, CAN EXPERIENCE RAPID AIR LOSS DUE TO AN IRREGULARITY OF THE INNER LINER. Remedy: MICHELIN WILL NOTIFY ITS CUSTOMERS AND REPLACE THE TIRES FREE OF CHARGE. THE RECALL BEGAN DECEMBER 27, 2004. OWNERS WHO DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MICHELIN AT 888-622-2306.
DAIMLER TRUCKS IS RECALLING CERTAIN MODEL YEAR 2004 THROUGH 2008 HEAVY TRUCKS MANUFACTURED FROM JULY 11, 2003, THROUGH SEPTEMBER 28, 2007, EQUIPPED WITH EPA04 MODEL MBE4000 ENGINES BUILT WITH PLASTIC LOW PRESSURE FUEL LINES AND FUEL FILTERS MOUNTED NEAR THE CENTER OF THE ENGINE ON THE LEFT-HAND SIDE. THE PLASTIC LOW PRESSURE FUEL LINE BETWEEN ENGINE MOUNTED FUEL FILTER AND ENGINE BLOCK MAY DEVELOP A SUBSTANTIAL DIESEL FUEL LEAK. Remedy: DAIMLER TRUCKS WILL NOTIFY OWNERS AND THE REMEDY WILL BE PERFORMED BY DETROIT DIESEL CORPORATION AUTHORIZED REPAIR FACILITIES. VEHICLES WILL BE INSPECTED AND THE PLASTIC LOW PRESSURE FUEL LINE WILL BE REPLACED WITH A STEEL LOW PRESSURE FUEL LINE. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. AN INTERIM LETTER WAS MAILED TO OWNERS ON OCTOBER 28, 2011. THE SAFETY RECALL BEGAN ON FEBRUARY 21, 2012. OWNERS MAY CONTACT DAIMLER TRUCKS AT 1-800-547-0712.
DAIMLER TRUCKS IS RECALLING 28,764 MY 2001 THROUGH 2008 FCCC B2 AND FS65 SCHOOL BUS CHASSIS, FCCC FB65 CONVENTIONAL BUSES, AND STERLING ACTERRA, FREIGHTLINER FLN, AND BUSINESS CLASS M2 HEAVY TRUCKS, BUILT FROM JANUARY 26, 2000, THROUGH MARCH 24, 2008, MANUFACTURED WITH ARVINMERITOR OR AXLE ALLIANCE COMPANY 6,000 THROUGH 8,000 POUND FRONT AXLES UTILIZING A FOUR PIECE SPINDLE-NUT SET. THESE AXLE ASSEMBLIES MAY HAVE BEEN PRODUCED WITH A THIN SPINDLE NUT WHICH MAY LEAD TO INCORRECT END PLAY, CONE SPIN, EXCESSIVE HEAT, DEGRADATION OF LUBRICATION, WEAR OF THE SPINDLE NUT AND BEARING JOURNAL, OIL CONTAMINATION WITH METAL SHAVINGS, AND PREMATURE BEARING FAILURE. Remedy: DAIMLER TRUCKS WILL NOTIFY OWNERS AND WILL REPAIR THE VEHICLES FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 8, 2009. OWNERS MAY CONTACT DAIMLER TRUCKS AT 1-800-547-0712.
DAIMLER TRUCKS NORTH AMERICA (DTNA) IS RECALLING 24,650 SCHOOL AND NON-SCHOOL BUSES, MOTOR HOME CHASSIS, AND TRUCKS MANUFACTURED FROM MARCH 9, 2004 THROUGH AUGUST 18, 2006, EQUIPPED WITH EPA04 CERTIFIED MBE900 ENGINES, MANUFACTURED BY DETROIT DIESEL BETWEEN MARCH 1, 2004, AND JULY 31, 2006. THE HIGH PRESSURE FUEL LINES AND TRANSFER TUBES MAY FATIGUE AND FRACTURE. Remedy: DETROIT DIESEL WILL NOTIFY OWNERS AND THE VEHICLES WILL BE REPAIRED WITH MORE ROBUST LINES AND VIBRATION DAMPERS FREE OF CHARGE. REPAIRS WILL BE PERFORMED BY AUTHORIZED DETROIT DIESEL DISTRIBUTORSHIPS. THE RECALL BEGAN ON MARCH 9, 2009. OWNERS MAY CONTACT DETROIT DIESEL 1-313-592-3708 OR DTNA TOLL-FREE AT 1-800-547-0712 FOR MORE INFORMATION.
CERTAIN MY 2004 FREIGHTLINER BUSINESS CLASS M2 AND THOMAS BUILT SAF-T-LINER C2 SCHOOL BUSES MANUFACTURED BETWEEN JULY 26 AND OCTOBER 29, 2004, EQUIPPED WITH A CATERPILLAR C-7 ENGINE AND BORG-WARNER KYS 4735 35480 55 ENGINE FAN. THE FAN SHROUD MAY BE DRAWN BACK INTO THE FAN AT HIGH ENGINE SPEEDS WHEN THE FAN CLUTCH ENGAGES. DUE TO REDUCED CLEARANCE, HEAVY CONTACT BETWEEN THE FAN AND THE SHROUD MAY CAUSE THE FAN BLADE TO FRACTURE. Remedy: FREIGHTLINER WILL NOTIFY ITS CUSTOMERS AND REPLACE THE ENGINE FAN WITH A FAN THAT HAS A DIFFERENT MOUNTING OFFSET FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN ON JANUARY 16, 2006. OWNERS MAY CONTACT FREIGHTLINER AT 1-800-547-0712.
CERTAIN 2004 AND 2005 THOMAS BUILT C2 SCHOOL BUSES AND FREIGHTLINER BUSINESS CLASS M2 HEAVY TRUCKS MANUFACTURED BETWEEN JUNE 2004 AND MARCH 2005. THE ANCHOR/PIVOT BOLT SUPPLIED WITH THE PARK BRAKE IS DEFECTIVE AND COULD FATIGUE FRACTURE PREMATURELY, RESULTING IN THE PARK BRAKE FAILING TO APPLY. Remedy: FREIGHTLINER WILL NOTIFY ITS OWNERS AND INSPECT AND REPLACE DEFECTIVE ANCHOR BOLTS FREE OF CHARGE. THE RECALL BEGAN ON MARCH 7, 2006. OWNERS MAY CONTACT FREIGHTLINER AT 1-800-547-0712.
ON CERTAIN TRUCKS AND FIRE TRUCKS EQUIPPED WITH KYS 4735-43782-02 ENGINE COOLING FANS AND BUILT ON CATERPILLAR 3126, C7, MBE906, MBE926, OR CUMMINS ISC ENGINES, THE STEEL FAN INSERT ON THE COOLING FANS CAN CRACK. Remedy: DEALERS WILL REPLACE THE ENGINE COOLING FAN FREE OF CHARGE. THE RECALL BEGAN ON JUNE 8, 2005. OWNERS MAY CONTACT FREIGHTLINER AT 1-800-547-0712.
CERTAIN FREIGHTLINER SCHOOL BUS CHASSIS, HEAVY TRUCKS, AND THOMAS BUILT SCHOOL BUSES MANUFACTURED BETWEEN JULY 2002 AND JULY 3, 2007, EQUIPPED WITH BENDIX SR-7 SPRING BRAKE CONTROL VALVES. THE PARKER SCV BRASS 90 DEGREE SINGLE CHECK VALVES (SCV) WHICH ATTACH TO THE SUPPLY PORT OF A BENDIX SR-7 SPRING BRAKE MODULATING VALVE CAN BREAK APART. PIECES OF THE PARKER SCV CAN BECOME LODGED INSIDE THE SR-7 SPRING BRAKE MODULATING VALVE, POTENTIALLY CAUSING EITHER LEAKAGE OUT OF THE SR-7 VALVE OR PREVENTING AIR FROM PROPERLY EXHAUSTING FROM THE SR-7 VALVE. ALSO, DUE TO A MANUFACTURING DEFECT IN THE INTERNAL RUBBER CHECK VALVE INSIDE THE SR-7 SPRING BRAKE MODULATING VALVES, THE VALVES CAN BECOME DEFORMED AND NOT SEAT PROPERLY. Remedy: FREIGHTLINER WILL NOTIFY OWNERS AND REPAIR THE VEHICLES FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 11, 2008 TO FREIGHTLINER, STERLING, AND FREIGHTLINER CUSTOM CHASSIS OWNERS; TO THOMAS BUILT BUS OWNERS ON FEBRUARY 1, 2008. OWNERS CAN CONTACT FREIGHTLINER AT 1-800-547-0712.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: Certain trucks were built with air reservoir tanks that are too small in relation to the size of the air brake chambers. Canadian regulations require enough air reservoir capacity to ensure the brakes work even with heavy use or when there is a partial loss of the air system. Safety Risk: Reduced braking could cause extended stopping distances and increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their truck to a Daimler Trucks North America authorized service facility to modify the truck to ensure it meets Canadian regulations.
On certain vehicles equipped with Kidde fire extinguishers with black plastic handles and valves, the fire extinguishers may become clogged or require excessive force to activate. Also, the nozzle may detach from the valve assembly with enough force that it could cause injury, and fail to discharge. In case of fire, failure of the extinguisher to function could result in injury and/or property damage. Correction: Owners will be provided with instructions on how to inspect the fire extinguisher to see if it is recalled. Replacement fire extinguishers will be supplied by Kidde directly. Note: For more information about recalled fire extinguishers, please visit <a href="https://inmarmarketaction.com/kidde/Kidde284CA/">www.kidde.com</a>.
On certain trucks, the plastic low-pressure fuel line between the engine-mounted fuel filter and the engine block may develop a diesel fuel leak. The location of the leak is unlikely to result in a vehicle fire; however, diesel fuel spilt on the roadway could endanger other road users by making the roadway unexpectedly slippery. This could ultimately result in a vehicle crash causing property damage and/or personal injury. Correction: Dealers will replace the plastic low-pressure fuel line with a steel version.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, high pressure fuel lines and transfer tubes may fatigue and fracture, causing a diesel fuel leak. Fuel leakage, in the presence of an ignition source, could result in a fire. Correction: Dealers will replace the fuel lines and transfer tubes with more robust versions.
On certain vehicles, incorrect spindle nuts may have been installed during vehicle assembly. This could cause incorrect end play, cone spin, excessive heat, degradation of lubrication, wear of the spindle nut and bearing journal, oil contamination with metal shavings, and premature bearing failure. Continued operation could lead to wheel separation, which could result in a vehicle crash. As well, this situation creates the risk that nearby bystanders or motorists be struck by a wayward wheel assembly. Either of these concerns could cause property damage, personal injury, or death. Correction: Dealers will affect repairs.
On certain vehicles, the internal rubber check valve inside the Bendix SR-7 spring brake modulating valve can become deformed over time. The effect of this defect is intermittent and presents a potential delay or failure in applying the parking brakes; potentially resulting in a vehicle roll away. Should this occur, the unattended roll away vehicle could strike a bystander or cause property damage. Correction: Dealers will install a check valve repair kit.
On certain vehicles, the rear suspension transverse beam castings were not made to specifications. If a casting were to break when the vehicle is in motion, parts could become projectiles with potential to cause property damage, personal injury or death. Also, the transverse beam may drop down low enough to contact the road surface causing sparks that could ignite a fire. Correction: Dealers will inspect and, if necessary, replace the transverse beams.
On certain vehicles, the park brake anchor/pivot bolt may fatigue fracture. As a result, the parking brakes may not apply and the vehicle could roll away without warning, resulting in possible injury or death. Correction: Dealers will inspect and, if required, replace the park brake anchor bolts.
On certain vehicles, the front hubs may fracture and allow the wheel assembly to separate from the vehicle. This could cause a crash without prior warning. Correction: Dealers will inspect and, if required, replace the hubs.
On certain vehicles, the engine cooling fan may fracture and pieces may separate from the fan blade which could result in vehicle damage and possible personal injury. Correction: Dealers will replace the cooling fan.
Certain vehicles are equipped with Michelin XDE 10R22.5 LRG and LRF tires that do not comply with the requirements of CMVSS 109. A localized variance in the gauge of the inner liner could result in a rapid loss of air pressure. Correction: Dealers will replace the tires.
Certain vehicles equipped with an Air Management Unit (AMU) in the control systems for the suspension dump valves, drive axle differential lock, fifth wheel slide locks and engine brakes. An incorrect spring in the AMU solenoid double check valve may not allow the valve to release under certain conditions which could affect vehicle control and handling characteristics. Correction: Dealers will replace the solenoid valve in the AMU assembly.
On certain vehicles, the tapered joint that attaches the shifter to the transmission may separate making it difficult to put the transmission into gear. The driver may not be able to engage a transmission gear, which would eliminate engine braking and disable the vehicle from moving under its own power. Correction: Dealer will re-secure the shift lever to the transmission.