Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2004 Mazda RX-8, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Mazda North American Operations (Mazda) is recalling certain 2003-2008 Mazda6, 2004-2005 MPV, 2004 RX-8, and 2006-2007 Mazdaspeed6 vehicles. These vehicles had their passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling. Remedy: Owners are advised not to drive their vehicles until the remedy is performed. Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. The recall began December 3, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 2618F. Note: This recall supersedes recalls 13V130, 14V362, 14V773 and 15V869.
Mazda North America Operations (Mazda) is recalling certain 2003-2008 Mazda6, 2006-2007 Mazdaspeed6 and 2004 MPV vehicles nationwide. Mazda is also recalling 2005-2006 MPV vehicles in Alabama, Arizona, Arkansas, California, Delaware, the District of Columbia, Florida, Georgia, Hawaii, Illinois, Indiana, Kansas, Kentucky, Louisiana, Maryland, Mississippi, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, South Carolina, Tennessee, Texas, Virginia, West Virginia, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands. On July 9, 2019 this recall was expanded to include certain 2004-2011 RX-8 vehicles that were previously recalled under 16V-354 but have not yet been repaired. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these passenger air bag inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. Remedy: Owners are advised not to drive their vehicles until the remedy is performed. Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began July 6, 2018. Mailing to the affected RX-8 owners began July 6, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 2618F. Note: With the addition of the RX-8 vehicles, this recall fully supersedes recall 16V354.
Mazda North American Operations (Mazda) is recalling certain model year 2003-2008 Mazda6, 2004-2008 RX-8, and 2006-2007 Mazdaspeed6 vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion and other factors, including manufacturing variability that, over time, could cause the inflator to rupture. Remedy: Owners are advised not to drive their vehicles until the remedy is performed. Mazda will notify owners, and dealers will replace the driver's frontal air bag inflator with an alternate inflator, free of charge. The recall began on September 12, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1417G. Note: This recall supersedes recall 15V-382.
Mazda North America Operations (Mazda) is recalling certain model year 2004-2008 RX-8 vehicles. Heat from the engine and the exhaust may cause the main fuel pump pipe to crack. Remedy: Mazda will notify owners, and dealers will replace the fuel pump filter kit, free of charge. The recall began on July 31, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1017E.
Mazda North American Operations (Mazda) is recalling certain 2004 Mazda RX-8 vehicles. The ball joint socket on the front suspension lower control arm may crack and the ball joint may separate from the socket. Remedy: Mazda will notify owners, and dealers will replace the front lower control arms, free of charge. The recall began on July 31, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1117E.
Mazda North America Operations (Mazda) is recalling certain model year 2004-2008 RX-8 vehicles manufactured April 10, 2003, to February 18, 2008. The affected vehicles have fuel pump sealing rings that may deteriorate due to exposure to heat from the engine or exhaust pipe. Remedy: Mazda will notify owners, and dealers will replace the fuel pump sealing ring set and add a thermal insulation pad to the fuel tank, free of charge. The recall began July 31, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 0516J.
ON CERTAIN PASSENGER VEHICLES, DUE TO IMPROPER FORGING OF THE LOWER CONTROL ARM, CRACKS MAY OCCUR IN THE BALL JOINT SOCKET. Remedy: DEALERS WILL INSPECT AND, IF NECESSARY, REPLACE THE CONTROL ARMS. THE RECALL BEGAN ON AUGUST 30, 2005. OWNERS MAY CONTACT MAZDA AT 1-800-222-5500.
IF CERTAIN PASSENGER VEHICLES ARE PARKED AND THE ENGINE IS OPERATED AT HIGH RPM'S FOR AN EXCESSIVE LENGTH OF TIME, SOME OF THE PARTS AROUND THE EXHAUST SYSTEM CAN MELT AND PRODUCE A VARIETY OF MALFUNCTIONS. PROBLEMS CAUSED BY THE EXCESSIVE HEAT BUILD-UP CAN RANGE FROM INOPERATIVE OXYGEN SENSOR, NEUTRAL SWITCH AND BACK UP LIGHTS, PROBLEMS WITH THE PARKING BRAKES, MALFUNCTIONS OF THE GAS GAUGE AND/OR POSSIBLE FUEL LEAKS RESULTING FROM HEAT DAMAGE TO THE FUEL TANK. Remedy: DEALERS WILL INSPECT AND REPLACE PARTS. THE RECALL BEGAN ON AUGUST 30, 2005. OWNERS MAY CONTACT MAZDA AT 1-800-222-5500.
ON CERTAIN PASSENGER VEHICLES WITH MANUAL TRANSMISSIONS, THE HEAT INSULATOR MAY BE CRACKED CAUSING ABNORMAL NOISE. Remedy: DEALERS WILL REPLACE THE HEAT INSULATOR. THE RECALL BEGAN MARCH 5, 2004. OWNERS SHOULD CONTACT MAZDA AT 1-800-222-5500.
AS A RESULT OF AN NCAP TEST, CERTAIN PASSENGER VEHICLES ARE BEING RECALLED FOR IMPROPERLY WIRED FRONT PASSENGER SEAT AIR BAGS. Remedy: DEALERS WILL INSTALL A NEW WIRING HARNESS IN THE FRONT PASSENGER SEAT AIR BAG SYSTEM. THE RECALL BEGAN MARCH 5, 2004. OWNERS SHOULD CONTACT MAZDA AT 1-800-222-5500.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Action: Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag inflator or airbag module replaced. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected. Additional note: This recall supersedes recalls 2014-245 (Mazda Recall 7714F), 2018-038 (Mazda Recall 2018A) and 2018-584 (Mazda Recall 2018A). Vehicles repaired under the previous recalls do not require repair under this recall.
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the driver frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the driver frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Additional Note: This recall supersedes recall 2015-247 (Mazda Recall 8215F). Vehicles completed under 2015-247 do not need to be completed under recall 2018-036.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
Note: This recall is superseded by recall 2019496. Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2019496">recall 2019496</a> for more information. On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Additional Note: This recall supersedes recalls 2016-259 (Mazda Recall 9416E) and 2017-011 (Mazda Recall 0617A) for RX-8 models only. RX-8 model vehicles completed under those two recalls do not need to be completed under recall 2018-038 (Mazda Recall 2018A).
On certain vehicles, the ball joint socket area on the front lower control arm may become cracked due to an inappropriate manufacturing process of the ball joint. If a large load is applied to the suspension while driving, the ball joint may suddenly separate from the socket, which could result in a loss of steering control, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the lower control arms with modified parts.
On certain vehicles, the fuel pump discharge pipe may crack and cause a fuel leak. A fuel leak in the presence of an ignition source could result in a fire, increasing the risk of injury and/or damage to property. Correction: Dealers will replace the fuel filter body with an improved part.
On certain vehicles, the fuel pump sealing rings may deteriorate from being exposed to heat from the engine and exhaust pipe. Over time, this could cause the fuel pump rings to crack, which could result in a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or property damage. Correction: Dealers will replace the fuel pump rings with new parts and add additional insulation to the fuel tank.
Note: The recall for the 2004 RX-8 model has been superseded by <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018038">recall 2018-038 (Mazda Recall 2018A)</a>, and the recall for the 2004 MPV model has been superseded by recall <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018578">2018578 (Mazda Recall 2618F)</a>. On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the airbag inflator. Additional note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the airbag module. Note: This recall is superseded by recall 2018-036. Please see recall 2018-036 for more information. <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018036">Click here for more information</a>.
Mazda Canada is conducting a voluntary Safety Improvement Campaign concerning the driver's airbag inflator on certain vehicles equipped with Takata airbags. Mazda will replace the driver's inflator on affected vehicles. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Note: This Safety Improvement Campaign is superseded by recall 2015-247 (Mazda Recall 8215F). Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2015247">recall 2015247</a> for more information.
Note: For Mazda6 models, this recall is superseded by recall 2018578 (Mazda Recall 2618F). Please see recall <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018578">2018578</a> for more information. For RX-8 models, this recall is superseded by recall 2019496 (Mazda Recall 2618F). Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2019496">recall 2019496</a> for more information. On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the passenger airbag inflator. Note: This recall is an expansion of recall 2013112.
On certain vehicles, if while parked the engine is operated at high RPM's for an excessive length of time, some parts around the exhaust system can melt and produce a variety of malfunctions. The problems caused by the excessive heat build-up can range from an inoperative oxygen sensor, neutral switch and back-up lights, problems with the parking brakes, malfunctions of the gas gauge, and in the worst case, possible leaks from the fuel tank. Fuel leakage in the presence of an ignition source could result in a fire. Correction: Dealers will reprogram the Powertrain Control Module, install a heat insulator pad on the fuel tank, and inspect various components for heat damage.
On certain vehicles, improper forging of the front lower control arms may allow cracks in the ball joint socket to form. As a result, the ball stud may separate from the control arm, which could cause a loss of vehicle control and a crash. Correction: Dealers will inspect and, if necessary, replace both front lower control arms.
On certain vehicles, the front passenger-side airbag was improperly wired and may not provide adequate protection in the event of a crash. Correction: Dealer will install a short wiring harness kit.
On certain vehicles, the dynamic damper heat insulator on the manual transmission may crack. Should the driver continue to operate the vehicle with a cracked insulator on the dynamic damper, the insulator may drop from the vehicle and present a safety hazard to a following vehicle. Correction: Dealer will install a modified damper.