Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2004 Mitsubishi Endeavor, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
CERTAIN SPORT UTILITY VEHICLES MAY HAVE BEEN EQUIPPED WITH DEALER-INSTALLED TRAILER HITCH WIRING HARNESS AND CONTROL MODULE. THE ELECTRONIC CONTROL MODULE CAN OVERHEAT. Remedy: OWNERS ARE BEING REQUESTED TO STOP USING THE HARNESS UNTIL A NEWLY DESIGNED REPLACEMENT IS PROVIDED AND CAN BE INSTALLED BY THE DEALER. THE RECALL BEGAN ON MAY 28, 2004. OWNERS SHOULD CONTACT MITSUBISHI AT 1-888-648-7820.
CERTAIN PASSENGER VEHICLES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, 'OCCUPANT CRASH PROTECTION.' THE BILINGUAL ENGLISH/SPANISH REMOVABLE AIR BAG WARNING LABELS AFFIXED TO THE DASH AND TO THE SUNVISOR DO NOT MEET THE SIZE REQUIREMENTS OF THE STANDARD. Remedy: MITSUBISHI CARIBBEAN WILL MAIL A CUSTOMER NOTIFICATION LETTER CONTAINING A WRITTEN DESCRIPTION AND A GRAPHIC OF THE BI-LINGUAL DASHBOARD AIR BAG WARNING LABEL. IN ADDITION, ALL CURRENT 2000-2004 NATIVA OWNERS WILL ALSO RECEIVE REPLACEMENT AIR BAG ALERT LABELS FOR THE SUN VISORS. THIS RECALL IS EXPECTED TO BEGIN DURING MARCH OR APRIL 2005. THE NOTIFICATION TO THE NATIVA OWNERS IS EXPECTED TO BEGIN DURING APRIL OR MAY 2005. OWNERS SHOULD CONTACT MITSUBISHI CARIBBEAN AT 1-787-251-8715.
ON CERTAIN VEHICLES, THE FOOT OF THE DRIVER'S SIDE SEAT RISER MAY DEVELOP A CRACK, RESULTING IN REDUCED STRENGTH OF THE SEAT ANCHORAGE. Remedy: DEALERS WILL INSPECT THE DRIVER'S SEAT BRACKET TO DETERMINE WHETHER IT REQUIRES REPLACEMENT. IF SO, THE DEALER WILL REPLACE IT WITH A NEW, IMPROVED PART. THE RECALL BEGAN ON JULY 26, 2004. OWNERS SHOULD CONTACT MITSUBISHI AT 1-888-648-7820.
MITSUBISHI IS RECALLING CERTAIN MODEL YEAR 2004-2010 ENDEAVOR VEHICLES ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, DELAWARE, ILLINOIS, INDIANA, IOWA, KENTUCKY, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, VIRGINIA, WEST VIRGINIA, WISCONSIN, AND WASHINGTON D.C. COLD STATES INCLUDE NORTH DAKOTA, SOUTH DAKOTA, NEBRASKA, KANSAS, OKLAHOMA, COLORADO, WYOMING, MONTANA, IDAHO, WASHINGTON, OREGON, AND UTAH. ADJOINING STATES INCLUDE ARKANSAS, TENNESSEE, AND NORTH CAROLINA. IN SEVERE CORROSIVE ENVIRONMENTS WHERE ROAD SALTS ARE FREQUENTLY USED IN WINTER VEHICLES MAY BE EXPOSED TO ROAD DEBRIS (MUD) MIXED WITH ROAD SALT. THIS MATERIAL CAN BECOME TRAPPED BETWEEN A REINFORCING BRACKET AND THE FUEL FILLER PIPE, POTENTIALLY CAUSING CORROSION. OVER TIME, CORROSION COULD CREATE A LEAK IN THE FUEL FILLER PIPE THAT COULD RESULT IN A FUEL LEAKAGE WHEN FUELING THE VEHICLE. Remedy: DEALERS WILL REPLACE THE FUEL FILLER PIPE WITH A NEW IMPROVED PART FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE JULY 5, 2010. OWNERS MAY CONTACT MITSUBISHI AT 1-800-222-0037.
ON CERTAIN SPORT UTILITY VEHICLES, THE PARKING BRAKE PEDAL CABLE LOCK NUT MAY NOT HAVE BEEN TIGHTENED TO THE PROPER TORQUE SPECIFICATION. THE LOCK NUT MAY LOOSEN AND COME OFF, WHICH WILL REDUCE THE EFFECTIVENESS OF THE PARKING BRAKE. Remedy: DEALERS WILL INSPECT AND TIGHTEN THE PARKING BRAKE CABLE LOCK NUT, IF NECESSARY FREE OF CHARGE. THE RECALL BEGAN FEBRUARY 24, 2005. OWNERS MAY CONTACT MITSUBISHI AT 1-800-222-5500.
MITSUBISHI IS RECALLING 120,000 MY 2004-2006 ENDEAVOR PASSENGER VEHICLES. DURING VEHICLE USE, THE IGNITION KEY INTERLOCK CABLE (WHICH IS A COMPONENT OF THE INTERLOCK SYSTEM) MAY ALLOW THE INTERLOCKING CAM TO FALL FORWARD AND ALLOW THE IGNITION KEY TO BE REMOVED FROM THE IGNITION SWITCH WHEN THE GEARSHIFT MECHANISM IS NOT IN THE PARK POSITION. Remedy: DEALERS WILL INSPECT AND CORRECT THESE VEHICLES FOR THE REPORTED CONDITION. THE RECALL WILL BEGIN ON JULY 7, 2008. OWNERS MAY CONTACT MITSUBISHI AT 1-888-648-7820.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Certain vehicles, operated in areas where road salts are frequently used in winter, may be exposed to road debris (mud) mixed with road salt. This material can become trapped between a reinforcing bracket and the fuel filler pipe, potentially causing corrosion. Over time, corrosion could create a leak in the fuel filler pipe that could result in fuel leakage when fueling the vehicle. Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will replace the fuel filler pipe of vehicles equipped with the first-generation version. Vehicles assembled with the second-generation filler pipe will be inspected and, if severe corrosion on the fuel filler pipe is observed, the pipe will be replaced with a third-generation version. For vehicles where corrosion of the fuel filler pipe is not observed, an anti-corrosion wax-like material will be applied to the filler pipe, and the inner wheel well shield will be replaced with an updated part that provides improved protection against mud intrusion and accumulation. ** Note: This recall supersedes recall 2010050.**
Certain vehicles, operated in areas where road salts are frequently used in winter, may be exposed to road debris (mud) mixed with road salt. This material can become trapped between a reinforcing bracket and the fuel filler pipe, potentially causing corrosion. Over time, corrosion could create a leak in the fuel filler pipe that could result in fuel leakage when fueling the vehicle. This situation may result in a fire causing property damage, personal injury or death. Correction: Dealers will replace the fuel filler pipe and associated parts with new, improved parts. Note: This recall is superseded by recall 2011012.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, the ignition key interlock cable may allow the interlocking cam to fall forward and allow the ignition key to be removed from the ignition when the gearshift mechanism is not in the PARK position. If the driver does not shift to PARK before removing the key, and fails to engage the parking brake, the vehicle could roll and a crash could occur. This could result in property damage, personal injury or death. Correction: Dealers will affect repairs.
On certain vehicles, the parking brake pedal cable lock nut may not have been tightened to the proper torque specification during assembly. The lock nut may loosen and come off, which will reduce the effectiveness of the parking brake. This condition could allow the vehicle to roll if the automatic transmission is not placed into the PARK position. Correction: Dealers will tighten the lock nut.
On certain vehicles, the rear foot of the driver's side seat bracket may develop a crack, resulting in reduced strength of the seat anchorage. In the event of a crash, the seat could become detached, increasing the risk of occupant injury. Correction: Dealers will inspect the driver's seat bracket to determine whether it requires replacement.
On certain vehicles, the retaining bolts that attach the propeller shaft to the center bearing flange and/or the rear differential flange may be missing, not sufficiently tightened or over tightened. If the retaining bolts were to fall out, the drive to the rear wheels may be interrupted. In the worst case, the drive shaft may fall down, increasing the potential for a vehicle crash. Correction: Dealers will install new retaining bolts.