Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2004 Suzuki Verona, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
ON CERTAIN PASSENGER CARS, THE DUAL STAGE DRIVER'S AIR BAG DEPLOYS IN AN IMPROPER SEQUENCE. Remedy: DEALERS WILL INSTALL AN ADAPTING WIRING HARNESS. OWNER NOTIFICATION BEGAN ON OCTOBER 30, 2003, TO VERONA VEHICLE OWNERS. ALL FORENZA VEHICLES WERE REPAIRED AT THE PORT OF ENTRY. THERE ARE NO OWNER NOTIFICATIONS NECESSARY FOR THE FORENZA MODEL VEHICLES. OWNERS SHOULD CONTACT SUZUKI AT 1-800-934-0934.
IN CERTAIN PASSENGER VEHICLES, A FAULT IN THE ADAPTIVE FUEL CONTROL LOGIC CAN CAUSE SOME VEHICLES TO USE AIR/FUEL RATIOS DURING DECELERATION THAT ARE LEAN ENOUGH TO CAUSE ENGINE STALLING. Remedy: DEALERS WILL REPROGRAM THE ELECTRONIC CONTROL MODULE (ECM) ON AFFECTED VEHICLES. THE RECALL BEGAN ON SEPTEMBER 14, 2004. OWNERS SHOULD CONTACT SUZUKI AT 1-800-934-0934.
CERTAIN PASSENGER VEHICLES MAY HAVE A MISLOCATED SENSOR IN THE DRIVER'S SEAT BELT BUCKLE ASSEMBLY. THIS CONDITION CAN PREVENT THE DRIVER'S SEAT BELT TONGUE FROM BEING INSERTED INTO THE BUCKLE. Remedy: DEALERS WILL REPLACE THE DRIVER'S SEAT BELT BUCKLE ASSEMBLY. OWNER NOTIFICATION BEGAN SEPTEMBER 4, 2003. OWNERS SHOULD CONTACT SUZUKI AT 1-800-934-0934.
Suzuki Motor of America, Inc. (Suzuki) is recalling certain model year 2004-2006 Verona vehicles manufactured June 2003 to October 2005. In the affected vehicles, there may be heat generated within the DRL module located in the instrument panel, which could melt the DRL module. Remedy: Suzuki will notify owners, and dealers will replace the DRL module in the instrument panel, free of charge. The recall began on November 5, 2014. Owners can contact Suzuki customer service at 1-800-934-0934. Suzuki's number for this recall is XC.
ON CERTAIN PASSENGER VEHICLES, THE BRAKE LIGHT SWITCH MAY BECOME MISADJUSTED IF AN UPWARD/REARWARD FORCE IS APPLIED TO THE BRAKE PEDAL. IF THIS SHOULD OCCUR, THE BRAKE LIGHT SWITCH WILL NOT FUNCTION PROPERLY, CAUSING THE BRAKE LIGHTS, INCLUDING THE HIGH MOUNTED STOP LAMP, TO REMAIN ILLUMINATED CONTINUOUSLY WITHOUT BRAKE PEDAL APPLICATION, WITH THE IGNITION SWITCH IN THE ON OR OFF POSITION. Remedy: DEALERS WILL REPLACE THE BRAKE LIGHT SWITCH FREE OF CHARGE. THE RECALL BEGAN ON MARCH 16, 2005. OWNERS MAY CONTACT SUZUKI AT 1-800-934-0934.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain vehicles, heat generated within the daytime running light (DRL) module could cause the module to melt, potentially resulting in a fire, which may result in injury and/or property damage. Correction: Dealers will replace the daytime running lamp (DRL) module.
On certain vehicles, the Daytime Running Lamp (DRL) module may fail, causing one or more of the following conditions: the DRLs may flicker but remain illuminated; the DRL indicator in the instrument panel may flash; the DRLs may remain illuminated after the vehicle is turned OFF; the DRLs may cease to function and the DRL indicator in the instrument panel will turn OFF. A loss of DRL illumination could render the vehicle less visible to other motorists and pedestrians during daylight hours, which could result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the DRL module, if the above condition exists, for a period of up to 10 years or 240,000 km from first vehicle registration.
On certain vehicles, the stop lamp switch may become misadjusted if an upward force is applied to the brake pedal. The stop lamp electrical contacts in a misadjusted stop lamp switch may not open when the brake pedal is at its natural rest position, resulting in the brake lights staying illuminated continuously without service brake pedal application. Correction: Dealers will replace the stop lamp switch.
On certain vehicles, a fault in the adaptive fuel control logic can cause the air/fuel ratio during deceleration to become lean enough to cause engine stalling. Correction: Dealers will reprogram the Electronic Control Module.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain