Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2004 Volvo VHD, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Volvo Trucks North America (Volvo) is recalling certain 2004-2019 Volvo VHD trucks equipped with snow plow lamp preparation kits. The snow plow headlights can be turned on without other exterior lights, and high beam indicator will not work when the snow plow high beams are on. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment." Remedy: Volvo will notify owners, and dealers will update the software related to the plow lights, free of charge. The recall began December 19, 2018. Owners may contact Volvo customer service at 1-800-528-6586. Volvo's number for this recall is RVXX1804.
Volvo is recalling certain model year 2002-2013 VHD and VN trucks, manufactured from August 4, 2000, through June 22, 2012, and equipped with bench passenger seats. The seat belt d-ring weld may not be sufficient enough to meet the seat belt pull test. Therefore, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 210, "Seat Belt Assembly Anchorages." Remedy: Volvo Trucks of America will notify owners, and dealers will replace the suspected d-ring, free of change. The safety recall began on May 10, 2013. Owners may contact Volvo at 1-336-393-2000.
VOLVO TRUCKS IS RECALLING 127,764 MY 2001-2008 VHD, VNL, VNM, AND MY 2005-2008 VT TRUCKS. A SEAL MAY FAIL ALLOWING WATER AND CONTAMINANTS TO SEEP INTO THE WINDSHIELD WIPER MOTOR. Remedy: VOLVO WILL REPLACE THE WIPER MOTOR FREE OF CHARGE. SINCE THIS RECALL INVOLVES A LARGE NUMBER OF VEHICLES, VOLVO WILL RELEASE THE RECALL IN STAGES AS PARTS ARE RECEIVED. PRIORITY WILL BE GIVEN TO THE VEHICLES LOCATED IN THE REGIONS/STATES THAT HAVE A CORROSIVE ENVIRONMENT. THE RECALL BEGAN ON SEPTEMBER 30, 2009. OWNERS MAY CONTACT VOLVO TRUCKS AT 1-800-528-6586.
ON CERTAIN HEAVY DUTY TRUCKS, THE CIRCUIT PROTECTION (I.E. AUTOMATIC CIRCUIT BREAKERS) USED TO PROTECT THE VEHICLE LIGHTING SYSTEM MAY NOT PROVIDE ADEQUATE PROTECTION. Remedy: DEALERS WILL REPLACE THE CIRCUIT BREAKERS WITH FUSES. THE RECALL BEGAN ON FEBRUARY 25, 2008. OWNERS MAY CONTACT VOLVO TRUCKS AT 1-800-528-6586.
ON CERTAIN TRUCKS EQUIPPED WITH D12D ENGINES, THE EXHAUST GAS RECIRCULATION (EGR) COOLER INLET PIPES OR THE PIPES THAT CONNECT THE EGR VALVES TO THE COOLER MAY CRACK OR BREAK. Remedy: DEALERS WILL INSPECT AND REPAIR THE EGR COOLER PIPES AS REQUIRED AND INSTALL A HEAT SHIELD FREE OF CHARGE. AN INTERIM OWNER LETTER WAS MAILED ON FEBRUARY 17, 2006, TO ADVISE ON PRECAUTIONS THAT THE OWNER CAN TAKE UNTIL PARTS BECOME AVAILABLE. OWNERS ARE BEING NOTIFIED STARTING MARCH 3, 2006, THAT PARTS ARE NOW AVAILABLE. OWNERS MAY CONTACT VOLVO TRUCKS AT 1-800-528-6586.
ON CERTAIN TRUCKS, THE WHEEL SPACER MAY BECOME DISTORTED FROM HEAT WHICH POTENTIALLY COULD LEAD TO A LOSS OF CLAMP THAT MAY RESULT IN LOOSE WHEEL NUTS. Remedy: DEALERS WILL REPLACE THE WHEEL SPACERS AND THE WHEEL EQUIPMENT (WHEELS,STUDS, AND HUB) WILL BE INSPECTED FOR DAMAGE AND REPLACED IF NECESSARY FREE OF CHARGE. THE RECALL BEGAN ON JUNE 26, 2006. OWNERS MAY CONTACT VOLVO TRUCKS AT 1-800-528-6586.
ON CERTAIN TRUCKS EQUIPPED WITH VALEO WIPER SYSTEMS, THE WIPER MOTOR MAY BE SUSCEPTIVE TO SALT INTRUSION THAT COULD POSSIBLY LEAD TO A CONDITION WHERE THE CONNECTOR OVERHEATS TO A POINT WHERE THE CONNECTOR COULD IGNITE. Remedy: DEALERS WILL INSPECT AND REPLACE THE CONNECTOR PLATE ON THE WINDSHIELD WIPER MOTOR. PHASE 2 OF THE RECALL BEGAN ON NOVEMBER 1, 2004. OWNERS SHOULD CONTACT VOLVO TRUCKS AT 1-800-528-6586.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Certain vehicles equipped with a snowplow preparation kit may fail to comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 108 - Lighting System and Retroreflective Devices. The snowplow headlamps can be turned on without other exterior lights, and the high beam indicator does not work when the snowplow high beams are turned on, which is contrary to the requirements of the standard. This could allow the vehicle to be operated with the snowplow headlamps on and marker and tail lamps off, making the vehicle harder to see and potentially increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will update vehicle software to correct the non-compliance.
Certain vehicles may fail to conform to Canada Motor Vehicle Safety Standard 210 – Seatbelt Assembly Anchorages. The weld used to secure the nut to the center-passenger seatbelt D-ring mounting bracket may not be sufficient to meet the strength requirements of the Standard. Failure of the seatbelt D-ring anchorage to restrain the occupant would increase the risk of personal injury during a crash. Correction: Dealers will replace the D-ring for the middle seating position.
On certain vehicles, the windshield wiper motor may be susceptible to water intrusion, which could result in an electrical short circuit and a fire. This could cause property damage, personal injury or death. Correction: Dealers will affect repairs.
On certain trucks, the automatic circuit breakers used to protect the vehicle lighting system may not provide adequate protection. If a short circuit occurs, components and wiring may be subject to overheating, which could result in a vehicle fire, causing property damage and/or personal injury or death. Correction: Dealers will replace the circuit breakers with fuses.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, the material specification of the wheel spacer may not be suitable for some applications where severe operating conditions can result in degradation of the wheel spacer. This could lead to a loss of clamp load, which may result in loose wheel nuts. If the wheel nuts loosen for any reason, damage to the wheel studs and/or wheel may occur, which if left uncorrected, may lead to complete separation of the wheel(s) from the vehicle. Correction: Dealers will replace the wheel spacers and inspect and replace (as required) the wheels and wheel equipment.
On certain vehicles, the Exhaust Gas Recirculation (EGR) cooler inlet pipes and/or the pipes that connect the EGR valves to the cooler may fail (crack or break). If the pipes or the cooler inlet pipes fail and are left untreated, the air cleaner and inner fender may be subject to hot exhaust gases, which could potentially lead to a fire. Correction: Dealers will inspect the EGR cooler pipes and install a heat shield.
On certain vehicles, the windshield wiper motor may be susceptible to salt spray intrusion which could cause the wiper motor connector to overheat and ignite. A vehicle fire could result in property damage, personal injury or death. Correction: Dealers will replace the connector plate on the windshield wiper motor.
Certain vehicles do not comply with the requirements of CMVSS 207. The Isringhausen brand two man bench seat installation does not withstand forces required by the standard. Correction: Dealers will replace the Isringhausen seat with a different brand seat.