Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2005 BMW K 1200 S, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
BMW of North America, LLC (BMW) is recalling certain model year 2005-2010 R1200GS and R1200RT, 2006-2010 R1200GS Adventure, 2007-2010 R1200R, 2007 R1200S and K1200R Sport, 2005-2007 R1200ST, 2008-2009 HP2 Megamoto, 2006 HP2 Enduro, 2008-2010 HP2 Sport, 2005-2008 K1200S, 2006-2008 K1200R, K1200GT, 2009-2011 K1300S, 2010-2011 K1300R, and 2009-2010 K1300GT motorcycles. In the affected motorcycles, the rear wheel mounting flange may crack if the rear wheel mounting bolts are over tightened. Remedy: BMW will notify owners, and dealers will replace the existing aluminum rear wheel flange with a steel one, free of charge. The recall began on May 7, 2015. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2005-2011 model year R-model motorcycles, model year 2005-2012 K-model motorcycles, model year 2010-2011 S 1000 model motorcycles, and model year 2006-2010 HP2 motorcycles. In the affected motorcycles, the fuel pump flange (and the auxiliary fuel pump flange if equipped) could develop cracks and leak fuel. Remedy: BMW will notify owners, and dealers will either reinforce the fuel pump flange or replace the pump, as necessary, free of charge. The recall began on April 16, 2014. Owners may contact BMW customer relations at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain motorcycles, the fuel pump flange could crack. If this happens, fuel could leak while the engine is running. Note: This recall only affects motorcycles that did not have the fuel pump replaced under Transport Canada recall 2013-442. Safety Risk: A fuel leak can create the risk of a fire. Corrective Actions: BMW will notify owners by mail and instruct you to take your motorcycle to a dealer to replace the fuel pump and auxiliary fuel pump (if equipped) with an improved version.
Certain motorcycles with dealer installed accessory turn signals may not comply with the requirements of Canada Motor Vehicle Safety Standard (CVMSS) 108 - Lighting System and Retroreflective Devices. The size of the lens on the accessory turn signals may be too small, and therefore would not meet the requirements of the standard. This could reduce vehicle conspicuity to following and approaching road users, and increase the risk of a crash causing injury and/or property damage. Correction: Dealers will replace the accessory turn signals with factory indicators that meet the requirements of the standard.
On certain motorcycles, the threaded holes on the rear wheel flange could crack if the wheel bolts are tightened beyond the specified torque limit during servicing. Over time, this could allow the bolts to back out of their threaded holes, causing the rear wheel to become loose. This could result in a loss of stability of the motorcycle, and increase the risk of a crash causing injury and/or property damage. Correction: Dealers will replace the aluminum rear wheel flange with a steel flange.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
On certain motorcycles, cracks could develop in the fuel pump and/or auxiliary fuel pump flange (if equipped). This would result in fuel leaking when the engine is turned on and the fuel system is pressurized. Leaking fuel, in the presence of an ignition source, could lead to a fire causing injury and/or damage to property. Correction: Dealers will inspect the fuel pump flange(s) and install a reinforcing ring or replace the fuel pump(s), as necessary.
On certain motorcycles, due to environmental conditions, the bearings of the link lever attached to the rear strut could be subject to corrosion. This could lead to reduced movement of the link lever. Over time, if the corrosion became significant, restriction of movement of the link lever could occur. This could affect handling of the motorcycle. In an extreme case, this could result in the connecting rod breaking by a bending force, causing the rear wheel to decelerate by contact with the inner fender. This could lead to a crash depending on traffic, road conditions and rider's reactions. Correction: Dealers will replace the rear suspension relay lever.
On certain motorcycles, frequent short-trip usage, particularly at low ambient temperatures, causes condensation, increasing the proportion of water in the engine oil. The water vapour produced while the engine is running condenses at the outlet port of the dry-sump oil tank breather. If temperatures are below 0 degrees Celsius, the condensation can freeze and plug the breather line of the oil tank. As a result, oil tank over-pressurization can cause the tank to rupture, allowing oil to escape onto the rear wheel and create the risk of a crash causing injuries or death. Correction: Dealers will install an updated oil cap with a pressure relief valve.
Certain motorcycles may exhibit a temporary loss of ABS function as a result of an "overpressure" effect in the brake system caused by applying significant force to the brake lever under rapid, repeated and unusually harsh braking. Loss of ABS function can increase the risk of a crash in certain traffic and road conditions. Correction: Dealers will install a banjo bolt with a flow restrictor to the front brake line.
On certain motorcycles, the Integral Anti-lock Brake System (IABS) sensor cable could hang in a loop near the front left brake caliper if service has been performed, for example, a front tire change. If this happens, the sensor cable can come into contact with, and rub against, the front brake disk. Over time, if the chafing becomes severe, it is possible to lose the ABS function. Correction: Dealers will attach an additional retaining clip to the IABS sensor cable.