Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2005 BMW R1200 RT, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
BMW of North America, LLC (BMW) is recalling certain 2009-2011 K1300 (S, GT), 2010-2011 S1000 RR, 2005-2011 R1200 (GS, GS Adventure, R, RT, S, ST), 2006-2010 HP2 (Enduro, Megamoto, Sport), 2005-2008 K1200 (R, R Sport, S, GT), and 2012 K1600 (GT, GTL) motorcycles that were repaired under recall 13V-617 with the support ring remedy and where the fuel pump was not replaced at a later date. This recall involves the fuel pump, and also the auxiliary fuel pump as applicable. The affected motorcycles have a fuel pump flange that may crack, possibly resulting in a fuel leak while the engine is running. Remedy: BMW will notify owners, and dealers will replace the fuel pump(s) with an improved version, free of charge. The recall began January 18, 2021. Owners may contact BMW customer service at 1-800-525-7417.
ON CERTAIN MOTORCYCLES, EXPOSURE OF THE THROTTLE HOUSING TO ROAD DEBRIS COULD FALL AND BECOME CAUGHT BETWEEN THE THROTTLE-BODY AND THE ENGINE BLOCK. Remedy: DEALERS WILL INSTALL A COVER OVER THE THROTTLE-CABLE PULLEY FREE OF CHARGE. THE RECALL BEGAN ON MAY 10, 2005. OWNERS MAY CONTACT BMW AT 1-800-831-1117.
ON CERTAIN MOTORCYCLES, IF CERTAIN PROCEDURES ARE PERFORMED THAT INVOLVES REMOVAL OF THE FRONT LEFT BRAKE CALIPER, THE ABS SENSOR CABLE CAN BE ROUTED INCORRECTLY AND WHEN THE CALIPER IS REINSTALLED, THE SENSOR CABLE CAN COME INTO CONTACT AND RUB AGAINST THE FRONT BRAKE DISC. OVERTIME, IF THE CHAFING BECOMES SEVERE, IT IS POSSIBLE TO LOSE THE ABS FUNCTION. Remedy: DEALERS WILL ATTACH ADDITIONAL RETAINING CLIPS FREE OF CHARGE TO THE ABS SENSOR CABLE, WHICH WILL PROVIDE A MORE SECURE CONNECTION TO THE WHEEL CARRIER. THE RECALL BEGAN ON JUNE 5, 2006, AND WILL BE A PHASED MAILING THROUGH OCTOBER 2006. OWNERS MAY CONTACT BMW AT 1-800-831-1117.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain motorcycles, the fuel pump flange could crack. If this happens, fuel could leak while the engine is running. Note: This recall only affects motorcycles that did not have the fuel pump replaced under Transport Canada recall 2013-442. Safety Risk: A fuel leak can create the risk of a fire. Corrective Actions: BMW will notify owners by mail and instruct you to take your motorcycle to a dealer to replace the fuel pump and auxiliary fuel pump (if equipped) with an improved version.
Certain motorcycles with dealer installed accessory turn signals may not comply with the requirements of Canada Motor Vehicle Safety Standard (CVMSS) 108 - Lighting System and Retroreflective Devices. The size of the lens on the accessory turn signals may be too small, and therefore would not meet the requirements of the standard. This could reduce vehicle conspicuity to following and approaching road users, and increase the risk of a crash causing injury and/or property damage. Correction: Dealers will replace the accessory turn signals with factory indicators that meet the requirements of the standard.
On certain motorcycles, the threaded holes on the rear wheel flange could crack if the wheel bolts are tightened beyond the specified torque limit during servicing. Over time, this could allow the bolts to back out of their threaded holes, causing the rear wheel to become loose. This could result in a loss of stability of the motorcycle, and increase the risk of a crash causing injury and/or property damage. Correction: Dealers will replace the aluminum rear wheel flange with a steel flange.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
On certain motorcycles, cracks could develop in the fuel pump and/or auxiliary fuel pump flange (if equipped). This would result in fuel leaking when the engine is turned on and the fuel system is pressurized. Leaking fuel, in the presence of an ignition source, could lead to a fire causing injury and/or damage to property. Correction: Dealers will inspect the fuel pump flange(s) and install a reinforcing ring or replace the fuel pump(s), as necessary.
Certain motorcycles may exhibit a temporary loss of ABS function as a result of an "overpressure" effect in the brake system caused by applying significant force to the brake lever under rapid, repeated and unusually harsh braking. Loss of ABS function can increase the risk of a crash in certain traffic and road conditions. Correction: Dealers will install a banjo bolt with a flow restrictor to the front brake line.
Certain motorcycles may have an incorrectly routed front Anti-Lock Brake System (ABS) sensor cable. If certain service procedures are performed, for example, a front tire change which involves removal of the front left brake caliper, it is possible for the ABS sensor cable to be routed incorrectly when the caliper is reinstalled. If this happens, the sensor cable can come into contact with, and rub/chafe against, the front brake disk. Over time, if the chafing becomes severe, it is possible to lose the ABS function. Correction: Dealers will attach additional retaining clips to the ABS sensor cable.
On certain motorcycles, the fuel tank bleed hose may have been pinched during assembly. This could impair the bleeding function, which could result in a deformation of the fuel tank. This deformation could come into contact with the steering lock mechanism thus having the potential of locking the steering. Correction: Dealers will inspect the flow of air through the bleed hose. In the event of blockage, the fuel tank will be removed and the hose will be rerouted.