Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2005 Freightliner Argosy, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
ON CERTAIN TRUCKS, THE PROTECTIVE COVER FOR THE CAB POWER DISTRIBUTION MODEL (PDM) MAY BE MISSING OR IMPROPERLY INSTALLED. Remedy: DEALERS WILL INSTALL A NEW COVER FREE OF CHARGE. THE RECALL BEGAN ON DECEMBER 18, 2006. OWNERS MAY CONTACT FREIGHTLINER AT 1-800-547-0712.
CERTAIN 2005 THOMAS BUILT FS-65 AND C-2 SCHOOL BUSES AND 2005 FREIGHTLINER ARGOSY, COLUMBIA, CENTURY ST, AND M2 BUSINESS CLASS TRUCKS MANUFACTURED BETWEEN JUNE 4 AND JULY 8, 2005. THE SPINDLES IN THE REAR AXLE HOUSING WERE OVERHEATED DURING THE HEAT TREATMENT PROCESS. INCORRECTLY HEAT TREATED SPINDLES COULD RESULT IN A FRACTURE OF THE SPINDLE. Remedy: FREIGHTLINER WILL NOTIFY ITS CUSTOMERS AND INSPECT FOR THE HEAT TREAT DATE CODE ON THE END OF THE REAR SPINDLES AND REPLACE THE AXLE HOUSING IF NECESSARY. THE RECALL IS EXPECTED TO BEGIN ON JANUARY 23, 2006. OWNERS MAY CONTACT FREIGHTLINER
CERTAIN FREIGHTLINER SCHOOL BUS CHASSIS, HEAVY TRUCKS, AND THOMAS BUILT SCHOOL BUSES MANUFACTURED BETWEEN JULY 2002 AND JULY 3, 2007, EQUIPPED WITH BENDIX SR-7 SPRING BRAKE CONTROL VALVES. THE PARKER SCV BRASS 90 DEGREE SINGLE CHECK VALVES (SCV) WHICH ATTACH TO THE SUPPLY PORT OF A BENDIX SR-7 SPRING BRAKE MODULATING VALVE CAN BREAK APART. PIECES OF THE PARKER SCV CAN BECOME LODGED INSIDE THE SR-7 SPRING BRAKE MODULATING VALVE, POTENTIALLY CAUSING EITHER LEAKAGE OUT OF THE SR-7 VALVE OR PREVENTING AIR FROM PROPERLY EXHAUSTING FROM THE SR-7 VALVE. ALSO, DUE TO A MANUFACTURING DEFECT IN THE INTERNAL RUBBER CHECK VALVE INSIDE THE SR-7 SPRING BRAKE MODULATING VALVES, THE VALVES CAN BECOME DEFORMED AND NOT SEAT PROPERLY. Remedy: FREIGHTLINER WILL NOTIFY OWNERS AND REPAIR THE VEHICLES FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 11, 2008 TO FREIGHTLINER, STERLING, AND FREIGHTLINER CUSTOM CHASSIS OWNERS; TO THOMAS BUILT BUS OWNERS ON FEBRUARY 1, 2008. OWNERS CAN CONTACT FREIGHTLINER AT 1-800-547-0712.
DAIMLER TRUCKS IS RECALLING MODEL YEAR 2004-2010 TRUCKS EQUIPPED WITH CATERPILLAR C15 ENGINE. THE VARIABLE VALVE ACTUATION OIL LINE MAY RUB AGAINST THE P-CLIPS RETAINING THE OIL LINE, CAUSING AN OIL LEAK. Remedy: DAIMLER TRUCKS IS WORKING WITH CATERPILLAR TO REMEDY THESE VEHICLES. PLEASE SEE CATERPILLAR'S DEFECT REPORT 09E-020. CATERPILLAR WILL INSPECT AND REPAIR THE NECESSARY COMPONENTS FREE OF CHARGE. THE RECALL BEGAN ON MAY 5, 2009. OWNERS MAY CONTACT CATERPILLAR TOLL-FREE AT 1-800-447-4986 OR DAIMLER TRUCKS AT 1-800-547-0712.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain vehicles equipped with a Caterpillar C15 engine, the Variable Valve Actuation (VVA) oil line may wear against the P-clip retaining the oil line. An oil leak could result in a vehicle fire causing property damage and/or personal injury. Correction: Caterpillar dealers will replace the VVA oil line with an updated version.
On certain vehicles, the internal rubber check valve inside the Bendix SR-7 spring brake modulating valve can become deformed over time. The effect of this defect is intermittent and presents a potential delay or failure in applying the parking brakes; potentially resulting in a vehicle roll away. Should this occur, the unattended roll away vehicle could strike a bystander or cause property damage. Correction: Dealers will install a check valve repair kit.
On certain vehicles, the steering column may have been manufactured incorrectly. Two welds may have been omitted, which could cause the column to fail, possibly leading to a loss of steering control and a crash without warning. Correction: Dealers will inspect and replace columns with missing welds.
On certain vehicles, the protective cover for the cab Power Distribution Module (PDM) may be missing or improperly installed. If the protective cover is missing or not positioned correctly, any water intrusion from an open window or windshield leak may seep through the upper dash cover seam and drip onto the PDM. Water on the PDM circuits may cause a short circuit resulting in a fire that could cause personal injury. Correction: Dealers will install an updated protective cover.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, the rear suspension transverse beam castings were not made to specifications. If a casting were to break when the vehicle is in motion, parts could become projectiles with potential to cause property damage, personal injury or death. Also, the transverse beam may drop down low enough to contact the road surface causing sparks that could ignite a fire. Correction: Dealers will inspect and, if necessary, replace the transverse beams.
On certain vehicles, the rear spindles may fracture as a result of incorrect heat treat process during vehicle assembly. Rear spindle failure could allow the wheel, tire, and brake drum assembly to separate from the vehicle. The wheel end assembly could become a hazard for other traffic. Correction: Dealers will inspect for the heat treat date code on the end of the rear spindles. Axle housings will be replaced on vehicles manufactured with spindles that have the subject date codes.