Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2005 Freightliner Business Class M2, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
DAIMLER TRUCKS IS RECALLING 62,000 MY 2005-2007 FREIGHTLINER BUSINESS CLASS, CENTURY CLASS, COLUMBIA, CORONADO, FLD, CLASSIC, STERLING A-LINE, L-LINE, AND WESTERN STAR 4900 TRUCKS. A FRACTURED FUEL LINE COULD LEAK DIESEL FUEL. Remedy: HIGH PRESSURE FUEL LINES AND TRANSFER TUBES WILL BE INSPECTED AND REPLACED FREE OF CHARGED. THE RECALL BEGAN ON JULY 9, 2008. OWNERS MAY CONTACT DAIMLER TRUCKS AT 1-800-547-0712.
DAIMLER TRUCKS IS RECALLING CERTAIN MODEL YEAR 2004 THROUGH 2008 HEAVY TRUCKS MANUFACTURED FROM JULY 11, 2003, THROUGH SEPTEMBER 28, 2007, EQUIPPED WITH EPA04 MODEL MBE4000 ENGINES BUILT WITH PLASTIC LOW PRESSURE FUEL LINES AND FUEL FILTERS MOUNTED NEAR THE CENTER OF THE ENGINE ON THE LEFT-HAND SIDE. THE PLASTIC LOW PRESSURE FUEL LINE BETWEEN ENGINE MOUNTED FUEL FILTER AND ENGINE BLOCK MAY DEVELOP A SUBSTANTIAL DIESEL FUEL LEAK. Remedy: DAIMLER TRUCKS WILL NOTIFY OWNERS AND THE REMEDY WILL BE PERFORMED BY DETROIT DIESEL CORPORATION AUTHORIZED REPAIR FACILITIES. VEHICLES WILL BE INSPECTED AND THE PLASTIC LOW PRESSURE FUEL LINE WILL BE REPLACED WITH A STEEL LOW PRESSURE FUEL LINE. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. AN INTERIM LETTER WAS MAILED TO OWNERS ON OCTOBER 28, 2011. THE SAFETY RECALL BEGAN ON FEBRUARY 21, 2012. OWNERS MAY CONTACT DAIMLER TRUCKS AT 1-800-547-0712.
DTNA IS RECALLING CERTAIN MODEL YEAR 2005 THROUGH 2011 FREIGHTLINER BUSINESS CLASS C2, FCCC B2 CHASSIS, S2 CHASSIS, AND MC CHASSIS MANUFACTURED BEGINNING JANUARY 19, 2005 THROUGH APRIL 16, 2010. THE STOP LAMPS MAY BE INTERMITTENT DURING LIGHT BRAKE APPLICATIONS. Remedy: DTNA WILL NOTIFY OWNERS AND REPAIRS WILL BE PERFORMED BY DTNA DEALERSHIPS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 27, 2011. OWNERS MAY CONTACT DTNA AT 1-800-547-0712.
DAIMLER TRUCKS IS RECALLING 28,764 MY 2001 THROUGH 2008 FCCC B2 AND FS65 SCHOOL BUS CHASSIS, FCCC FB65 CONVENTIONAL BUSES, AND STERLING ACTERRA, FREIGHTLINER FLN, AND BUSINESS CLASS M2 HEAVY TRUCKS, BUILT FROM JANUARY 26, 2000, THROUGH MARCH 24, 2008, MANUFACTURED WITH ARVINMERITOR OR AXLE ALLIANCE COMPANY 6,000 THROUGH 8,000 POUND FRONT AXLES UTILIZING A FOUR PIECE SPINDLE-NUT SET. THESE AXLE ASSEMBLIES MAY HAVE BEEN PRODUCED WITH A THIN SPINDLE NUT WHICH MAY LEAD TO INCORRECT END PLAY, CONE SPIN, EXCESSIVE HEAT, DEGRADATION OF LUBRICATION, WEAR OF THE SPINDLE NUT AND BEARING JOURNAL, OIL CONTAMINATION WITH METAL SHAVINGS, AND PREMATURE BEARING FAILURE. Remedy: DAIMLER TRUCKS WILL NOTIFY OWNERS AND WILL REPAIR THE VEHICLES FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 8, 2009. OWNERS MAY CONTACT DAIMLER TRUCKS AT 1-800-547-0712.
ON CERTAIN TRUCKS EQUIPPED WITH FONTAINE MODIFICATION RIGHT HAND STEERING CONTROL AND EQUIPPED WITH SIT DOWN DUAL DRIVE CONVERSIONS, THE PINCH BOLT THAT SECURES THE LOWER STEERING SHAFT CONNECTION TO THE LH MITER BOX MAY HAVE BEEN IMPROPERLY TORQUED CAUSING THE BOLTS TO FALL OUT. Remedy: DEALERS WILL INSPECT AND REPLACE THE LOWER STEERING SHAFT PINCH BOLT AT THE CONNECTION AND BOLTS ON THE STEERING CROSS SHAFT WILL BE REPLACED. THE RECALL BEGAN ON FEBRUARY 17, 2006. OWNERS MAY CONTACT FREIGHTLINER AT 1-800-547-0712.
DAIMLER TRUCKS NORTH AMERICA (DTNA) IS RECALLING 24,650 SCHOOL AND NON-SCHOOL BUSES, MOTOR HOME CHASSIS, AND TRUCKS MANUFACTURED FROM MARCH 9, 2004 THROUGH AUGUST 18, 2006, EQUIPPED WITH EPA04 CERTIFIED MBE900 ENGINES, MANUFACTURED BY DETROIT DIESEL BETWEEN MARCH 1, 2004, AND JULY 31, 2006. THE HIGH PRESSURE FUEL LINES AND TRANSFER TUBES MAY FATIGUE AND FRACTURE. Remedy: DETROIT DIESEL WILL NOTIFY OWNERS AND THE VEHICLES WILL BE REPAIRED WITH MORE ROBUST LINES AND VIBRATION DAMPERS FREE OF CHARGE. REPAIRS WILL BE PERFORMED BY AUTHORIZED DETROIT DIESEL DISTRIBUTORSHIPS. THE RECALL BEGAN ON MARCH 9, 2009. OWNERS MAY CONTACT DETROIT DIESEL 1-313-592-3708 OR DTNA TOLL-FREE AT 1-800-547-0712 FOR MORE INFORMATION.
CERTAIN 2004 AND 2005 THOMAS BUILT C2 SCHOOL BUSES AND FREIGHTLINER BUSINESS CLASS M2 HEAVY TRUCKS MANUFACTURED BETWEEN JUNE 2004 AND MARCH 2005. THE ANCHOR/PIVOT BOLT SUPPLIED WITH THE PARK BRAKE IS DEFECTIVE AND COULD FATIGUE FRACTURE PREMATURELY, RESULTING IN THE PARK BRAKE FAILING TO APPLY. Remedy: FREIGHTLINER WILL NOTIFY ITS OWNERS AND INSPECT AND REPLACE DEFECTIVE ANCHOR BOLTS FREE OF CHARGE. THE RECALL BEGAN ON MARCH 7, 2006. OWNERS MAY CONTACT FREIGHTLINER AT 1-800-547-0712.
CERTAIN 2005 THOMAS BUILT FS-65 AND C-2 SCHOOL BUSES AND 2005 FREIGHTLINER ARGOSY, COLUMBIA, CENTURY ST, AND M2 BUSINESS CLASS TRUCKS MANUFACTURED BETWEEN JUNE 4 AND JULY 8, 2005. THE SPINDLES IN THE REAR AXLE HOUSING WERE OVERHEATED DURING THE HEAT TREATMENT PROCESS. INCORRECTLY HEAT TREATED SPINDLES COULD RESULT IN A FRACTURE OF THE SPINDLE. Remedy: FREIGHTLINER WILL NOTIFY ITS CUSTOMERS AND INSPECT FOR THE HEAT TREAT DATE CODE ON THE END OF THE REAR SPINDLES AND REPLACE THE AXLE HOUSING IF NECESSARY. THE RECALL IS EXPECTED TO BEGIN ON JANUARY 23, 2006. OWNERS MAY CONTACT FREIGHTLINER
CERTAIN FREIGHTLINER SCHOOL BUS CHASSIS, HEAVY TRUCKS, AND THOMAS BUILT SCHOOL BUSES MANUFACTURED BETWEEN JULY 2002 AND JULY 3, 2007, EQUIPPED WITH BENDIX SR-7 SPRING BRAKE CONTROL VALVES. THE PARKER SCV BRASS 90 DEGREE SINGLE CHECK VALVES (SCV) WHICH ATTACH TO THE SUPPLY PORT OF A BENDIX SR-7 SPRING BRAKE MODULATING VALVE CAN BREAK APART. PIECES OF THE PARKER SCV CAN BECOME LODGED INSIDE THE SR-7 SPRING BRAKE MODULATING VALVE, POTENTIALLY CAUSING EITHER LEAKAGE OUT OF THE SR-7 VALVE OR PREVENTING AIR FROM PROPERLY EXHAUSTING FROM THE SR-7 VALVE. ALSO, DUE TO A MANUFACTURING DEFECT IN THE INTERNAL RUBBER CHECK VALVE INSIDE THE SR-7 SPRING BRAKE MODULATING VALVES, THE VALVES CAN BECOME DEFORMED AND NOT SEAT PROPERLY. Remedy: FREIGHTLINER WILL NOTIFY OWNERS AND REPAIR THE VEHICLES FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 11, 2008 TO FREIGHTLINER, STERLING, AND FREIGHTLINER CUSTOM CHASSIS OWNERS; TO THOMAS BUILT BUS OWNERS ON FEBRUARY 1, 2008. OWNERS CAN CONTACT FREIGHTLINER AT 1-800-547-0712.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: Certain trucks were built with air reservoir tanks that are too small in relation to the size of the air brake chambers. Canadian regulations require enough air reservoir capacity to ensure the brakes work even with heavy use or when there is a partial loss of the air system. Safety Risk: Reduced braking could cause extended stopping distances and increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their truck to a Daimler Trucks North America authorized service facility to modify the truck to ensure it meets Canadian regulations.
On certain vehicles equipped with Kidde fire extinguishers with black plastic handles and valves, the fire extinguishers may become clogged or require excessive force to activate. Also, the nozzle may detach from the valve assembly with enough force that it could cause injury, and fail to discharge. In case of fire, failure of the extinguisher to function could result in injury and/or property damage. Correction: Owners will be provided with instructions on how to inspect the fire extinguisher to see if it is recalled. Replacement fire extinguishers will be supplied by Kidde directly. Note: For more information about recalled fire extinguishers, please visit <a href="https://inmarmarketaction.com/kidde/Kidde284CA/">www.kidde.com</a>.
On certain trucks, the plastic low-pressure fuel line between the engine-mounted fuel filter and the engine block may develop a diesel fuel leak. The location of the leak is unlikely to result in a vehicle fire; however, diesel fuel spilt on the roadway could endanger other road users by making the roadway unexpectedly slippery. This could ultimately result in a vehicle crash causing property damage and/or personal injury. Correction: Dealers will replace the plastic low-pressure fuel line with a steel version.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, the stop lamps may operate intermittently during light braking applications. Failure of the brake lamps to illuminate when the brakes are applied may result in the following road users being unaware of the driver's intentions, increasing the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the hydraulic brake light switch assembly.
On certain vehicles, high pressure fuel lines and transfer tubes may fatigue and fracture, causing a diesel fuel leak. Fuel leakage, in the presence of an ignition source, could result in a fire. Correction: Dealers will replace the fuel lines and transfer tubes with more robust versions.
On certain vehicles, incorrect spindle nuts may have been installed during vehicle assembly. This could cause incorrect end play, cone spin, excessive heat, degradation of lubrication, wear of the spindle nut and bearing journal, oil contamination with metal shavings, and premature bearing failure. Continued operation could lead to wheel separation, which could result in a vehicle crash. As well, this situation creates the risk that nearby bystanders or motorists be struck by a wayward wheel assembly. Either of these concerns could cause property damage, personal injury, or death. Correction: Dealers will affect repairs.
On certain trucks, the high-pressure fuel line at each injector may fatigue and fracture if a fastener at the end of the line is not properly connected. This would allow high pressure atomized diesel fuel to enter the engine compartment, creating a risk of fire, which could result in property damage, personal injury, or death. Correction: Dealers will affect repairs.
Certain trucks fail to comply with the requirements of CMVSS 108 - Lighting System and Retroreflective Devices. The front reflex reflectors were omitted during vehicle assembly. This could render the vehicle less visible to other motorist during hours of darkness, possibly resulting in a vehicle crash causing injuries or death. Correction: Dealers will install side reflex reflectors to the hood.
On certain vehicles, the internal rubber check valve inside the Bendix SR-7 spring brake modulating valve can become deformed over time. The effect of this defect is intermittent and presents a potential delay or failure in applying the parking brakes; potentially resulting in a vehicle roll away. Should this occur, the unattended roll away vehicle could strike a bystander or cause property damage. Correction: Dealers will install a check valve repair kit.
On certain vehicles, the rear suspension transverse beam castings were not made to specifications. If a casting were to break when the vehicle is in motion, parts could become projectiles with potential to cause property damage, personal injury or death. Also, the transverse beam may drop down low enough to contact the road surface causing sparks that could ignite a fire. Correction: Dealers will inspect and, if necessary, replace the transverse beams.
On certain vehicles equipped with both left-hand and right-hand drive positions, the pinch bolt that secures the lower steering shaft connection to the left-hand mitre box may have been improperly tightened during vehicle assembly. A loose joint could allow the steering shaft to separate from the mitre box, causing a loss of steering control that could result in a crash. Correction: Dealers will inspect and, if loose, replace the lower steering shaft pinch bolt.
On certain vehicles, the rear spindles may fracture as a result of incorrect heat treat process during vehicle assembly. Rear spindle failure could allow the wheel, tire, and brake drum assembly to separate from the vehicle. The wheel end assembly could become a hazard for other traffic. Correction: Dealers will inspect for the heat treat date code on the end of the rear spindles. Axle housings will be replaced on vehicles manufactured with spindles that have the subject date codes.
On certain vehicles, the park brake anchor/pivot bolt may fatigue fracture. As a result, the parking brakes may not apply and the vehicle could roll away without warning, resulting in possible injury or death. Correction: Dealers will inspect and, if required, replace the park brake anchor bolts.
On certain vehicles, the fan shroud may be drawn back into the fan at high engine speeds when the fan clutch engages. Heavy contact between the fan and the shroud may cause the fan blades to fracture. Correction: Dealers will replace the fan with one that has different mounting offset.
On certain vehicles, the front hubs may fracture and allow the wheel assembly to separate from the vehicle. This could cause a crash without prior warning. Correction: Dealers will inspect and, if required, replace the hubs.