Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2005 Winnebago Sightseer, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
WINNEBAGO IS RECALLING CERTAIN RECREATIONAL VEHICLES EQUIPPED WITH 1200-SERIES NORCOLD REFRIGERATORS. THE POPULATION OF REFRIGERATORS BEING ADDRESSED CONTAINS EITHER A SENSING ALGORITHM OR THERMAL SWITCH TO SHUT OFF POWER TO THE REFRIGERATOR WHEN HIGH TEMPERATURES ARE DETECTED IN ORDER TO PREVENT A POTENTIAL FIRE. THE RESPONSE TIMES OF THE SENSOR ALGORITHM AND THERMAL SWITCH DEVICES TO STOP POWER ARE NOT SUFFICIENT. Remedy: WINNEBAGO IS WORKING WITH NORCOLD TO IDENTIFY AND NOTIFY ANY AFFECTED OWNERS. OWNERS WILL BE INSTRUCTED TO CONTACT NORCOLD DEALERS TO RECEIVE THE REMEDY FREE OF CHARGE. PLEASE SEE NORCOLD'S DEFECT REPORT 10E-049 FOR ADDITIONAL INFORMATION. THE RECALL BEGAN DURING DECEMBER 2010. OWNERS MAY CONTACT NORCOLD AT 1-800-767-9101 OR WINNEBAGO AT 1-641-585-3535.
WINNEBAGO IS RECALLING CERTAIN MODEL YEAR 2005 THROUGH 2009 WINNEBAGO SIGHTSEER AND ITASCA SUNOVA MOTOR HOMES BECAUSE THE DINETTE AREA SEAT BELT RESTRAINTS ON THOSE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 210, "SEAT BELT ASSEMBLY ANCHORAGES." IN A COLLISION, THE GENERATED CRASH FORCES CAN CAUSE THE RESTRAINT'S ATTACHMENT TO TEAR AND ALLOW THE ANCHOR TO SEPARATE FROM THE BODY OF THE VEHICLE. Remedy: WINNEBAGO WILL NOTIFY OWNERS A DEALERS WILL REPAIR THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON DECEMBER 10, 2010. OWNERS MAY CONTACT WINNEBAGO AT 1-800-537-1885.
WINNEBAGO IS RECALLING VEHICLES EQUIPPED WITH AXLES THAT INCLUDE BOSH ZOPS OR ZOHT PIN SLIDE HYDRAULIC DISC BRAKES. WHEN COMBINED WITH OCCASIONAL OR SEASONAL VEHICLE OPERATION MAY EXPERIENCE CALIPERS STICKING IN THE APPLIED POSITION. THIS CAN RESULT IN ABNORMAL HEAT GENERATION AT THE WHEEL END CAUSING BRAKE DRAG. THE DRIVER WOULD NORMALLY HAVE WARNING OF THE BRAKE DRAG IF UNDETECTED BY THE DRIVER. Remedy: DEALERS WILL INSPECT AND REPLACE THE NECESSARY COMPONENTS FREE OF CHARGE WORKHORSE IS HANDLING THE REMEDY FOR THIS CAMPAIGN PLEASE SEE 09V-110. THE MANUFACTURER HAS NOT YET PROVIDED AN OWNER NOTIFICATION SCHEDULE. OWNERS MAY CONTACT WORKHORSE AT 1-877-246-7731 OR WINNEBAGO AT 1-641-585-3535.
ON CERTAIN MOTOR HOMES BUILT ON A 20,700 GVWR OR GREATER WORKHORSE CHASSIS, THERE MAY NOT BE SUFFICIENT CLEARANCE IN THE AREA WHERE THE FUEL LINE CROSSES THE FRAME CROSS MEMBER. Remedy: DEALERS WILL REPAIR THESE MOTOR HOMES BY PROVIDING CLEARANCE BETWEEN THE FUEL LINE AND FRAME CROSS MEMBER. THE FUEL LINE WILL BE INSPECTED AND, IF NECESSARY, REPLACED. THE RECALL BEGAN JANUARY 7, 2005. OWNERS SHOULD CONTACT WINNEBAGO AT 1-800-537-1885.
CERTAIN SEAT BELT BUCKLES ON SOME MOTOR HOMES FAIL TO CONFORM TO THE LOAD REQUIREMENT OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 209, "SEAT BELT ASSEMBLIES." Remedy: DEALERS WILL REPLACE THE BUCKLES. THE RECALL BEGAN ON NOVEMBER 12, 2004. OWNERS SHOULD CONTACT AMSAFE AT 1-574-266-8330 OR WINNEBAGO AT 1-800-537-1885.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Certain refrigerators used in Recreational Vehicles (RVs) contain either a sensing algorithm or a thermal switch to interrupt power when it detects high temperatures that could lead to a fire. An insufficient response time can result in the power not being shut-off in sufficient time to prevent a fire, which could result in property damage and/or personal injury. Correction: Dealers will install a thermocouple with a faster response time for all refrigerators with a sensing algorithm or a thermal switch.
On certain motorhomes, the dinette area seatbelts may not conform to Canada Motor Vehicle Safety Standards 210 - Seatbelt Assembly Anchorages. The final design did not include the steel plate as required by the Standard. During a crash, stress can cause the attachment to tear and allow the anchor to separate from the body of the vehicle Failure of the seatbelt anchorage to restrain the occupant as intended would increase the risk of personal injuries during a crash. Correction: Dealers will install additional seatbelt anchorage reinforcement plates.
On certain motorhomes, the brake calipers may stick in the applied position. This can result in abnormal heat generation at the wheel end which, if undetected, could eventually lead to soft brake pedal condition due to brake fluid boil. Extended stopping distances may result in a vehicle crash causing property damage, personal injury or death. Correction: Dealers will affect repairs.
On certain motorhomes equipped with Workhorse Custom Chassis, the engine fuel rail pulse damper retainer clip may fracture, resulting in inadequate retention of the damper. If the damper comes loose, a fuel leak may result in the underhood area which may result in a fire. Correction: Dealers will replace the engine fuel rail pulse damper retainer clip.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Certain motorhomes fail to comply with the requirements of CMVSS 101 and 105. Incorrect software programmed into the instrument panel cluster may not allow activation of certain driver warning indicators. As a result, the instrument cluster may fail to illuminate the warning lamps indicating brake system failure. Correction: Dealers will reprogram the instrument panel cluster.
Certain motorhomes may have insufficient clearance in the area where the fuel line and frame cross member intersect. The cross member may wear into the fuel line and cause a leak which has the potential to ignite, resulting in personal injury and/or vehicle and property damage. Correction: Dealers will inspect the fuel line for abrasion wear or damage, and pry the wiring support channel away from the line to provide additional clearance.
On certain vehicles, the seat belts do not meet the strength requirements of CMVSS 209. In the event of a crash, the seat belt buckle could release, leaving the occupant unrestrained, possibly resulting in serious injury or death. Correction: Dealers will replace the seat belt buckle assemblies.