Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2006 BMW R1200 GS Adventure, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
BMW of North America, LLC (BMW) is recalling certain 2009-2011 K1300 (S, GT), 2010-2011 S1000 RR, 2005-2011 R1200 (GS, GS Adventure, R, RT, S, ST), 2006-2010 HP2 (Enduro, Megamoto, Sport), 2005-2008 K1200 (R, R Sport, S, GT), and 2012 K1600 (GT, GTL) motorcycles that were repaired under recall 13V-617 with the support ring remedy and where the fuel pump was not replaced at a later date. This recall involves the fuel pump, and also the auxiliary fuel pump as applicable. The affected motorcycles have a fuel pump flange that may crack, possibly resulting in a fuel leak while the engine is running. Remedy: BMW will notify owners, and dealers will replace the fuel pump(s) with an improved version, free of charge. The recall began January 18, 2021. Owners may contact BMW customer service at 1-800-525-7417.
ON CERTAIN MOTORCYCLES, THE TIRE INFLATION VALVE HOLE IN THE RIM OF THE CROSS-SPOKE WHEEL WHICH IS EQUIPPED WITH THE OPTIONAL TIRE PRESSURE MONITORING SYSTEM (TPM) WAS INCORRECTLY MANUFACTURED. A LEAK MAY DEVELOP AT THIS LOCATION POSSIBLY CAUSING SUDDEN DEFLATION OF THE TIRE. Remedy: DEALERS WILL TEMPORARILY DEACTIVATE THE TPM SYSTEM, REMOVE THE CORRESPONDING VALVES AND INTEGRAL TPM SENSORS, AND THEN REPLACE THEM WITH STANDARD VALVES. WHEN A PERMANENT REPAIR IS AVAILABLE, OWNERS WILL BE NOTIFIED TO BRING THEIR VEHICLES IN FOR REACTIVATION OF THE TPM SYSTEM AND REPLACEMENT OF THE INTEGRAL TPM SENSORS AND VALVES. THE RECALL BEGAN ON JANUARY 12, 2007. OWNERS MAY CONTACT BMW AT 1-800-331-1117.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain motorcycles, cracks could develop in the fuel pump and/or auxiliary fuel pump flange (if equipped). This would result in fuel leaking when the engine is turned on and the fuel system is pressurized. Leaking fuel, in the presence of an ignition source, could lead to a fire causing injury and/or damage to property. Correction: Dealers will inspect the fuel pump flange(s) and install a reinforcing ring or replace the fuel pump(s), as necessary.
On certain motorcycles, if the hand protector is twisted out of position relative to the handlebar lever, to the extent that lever and protector come into contact, there is a possibility that the handlebar lever remain continuously in the partly operated position. This is turn can cause problems with the brake function and could increase the risk of a crash. Correction: Owners will receive a loose-leaf insert as an addendum to the Rider's Manual and two stickers complete with the installation instructions, or owners may have their authorised BMW motorcycle dealers do the installations for them.
On certain motorcycles, the fuel tank mounting fasteners can work loose, allowing the bolts to slip toward the inboard side and contact the fork leg if the handlebar is turned a significant amount. This could limit handlebar travel range, affecting handling and maneuverability of the motorcycle, which could increase the risk of a crash causing property damage, personal injury or death. Correction: Dealers will inspect and tighten the fuel tank mounting bolts as per specifications.
Certain motorcycles fail to comply with the requirements of CMVSS 108 - Lamps, Reflective Devices and Associated Equipment. The front turn signals were installed in an improper location. As a result, the rider's intentions to turn may not be conveyed clearly to other road users, increasing the risk of a crash causing injury or death. Correction: Dealers will replace the turn signal base.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
On certain motorcycles equipped with cross-spoke wheels and the optional tire-pressure monitoring system (TPM), the hole though which the tire inflation valve (and in this case, the integral TPM sensor) is inserted was not manufactured according to specifications. Because of this, the valve may not seat properly in the hole, and a leak may develop. In some cases, it is possible that sudden deflation of the tire could occur. If this happened, motorcycle handling and control would be compromised, increasing the risk of a crash. Correction: Dealers will temporarily deactivate the TPM system, remove the corresponding valves and integral TPM sensors, and then replace them with standard valves. When a permanent repair is available, owners will be notified to bring their vehicle in for reactivation of the TPM system and replacement of the integral TPM sensors and valves.