Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2006 Damon Intruder, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
DAMON IS RECALLING 4,677 MY 2004-2006 CHALLENGER, DAYBREAK, INTRUDER, MY 2004-2005 ESCAPER, ULTRASPORT, AND MY 2005 ASTORIA AND ASTORIA WALDORF MOTOR HOMES EQUIPPED WITH A TWO-DOOR REFRIGERATOR MANUFACTURED BY THE DOMETIC CORPORATION. THE REFRIGERATOR MAY HAVE A DEFECT IN THE BOILER TUBE. PRESSURIZED COOLANT SOLUTION COULD BE RELEASED INTO AN AREA WHERE AN IGNITION SOURCE (GAS FLAME) IS PRESENT. Remedy: DAMON WILL BE WORKING WITH DOMETIC IN ORDER TO REPAIR THESE REFRIGERATORS (PLEASE SEE 08E032). DOMETIC WILL REPAIR THESE REFRIGERATORS BY INSTALLING A SECONDARY BURN HOUSING, A THERMAL FUSE, AND A MELT FUSE FREE OF CHARGE. DOMETIC HAS RETAINED STERICYCLE INC. TO MANAGE THIS CAMPAIGN. STERICYCLE WILL ASSIST THE OWNER IN LOCATING DEALERSHIPS OR SERVICE CENTERS AND WILL PROVIDE ASSISTANCE WITH SCHEDULING OF APPOINTMENTS. OWNERS MAY CONTACT DOMETIC/STERICYCLE AT 1-888-446-5157 OR DAMON AT
CERTAIN MOTOR HOMES BUILT ON WORKHORSE CHASSIS MAY HAVE BEEN EQUIPPED WITH INCORRECT STEERING INTERMEDIATE SHAFTS. THE SPLINE CAN STRIP WHILE THE STEERING WHEEL IS BEING TURNED. Remedy: WORKHORSE IS CONDUCTING THIS RECALL (PLEASE SEE 06V148000) AND WILL INSPECT AND, IF NECESSARY, REPLACE THE STEERING INTERMEDIATE SHAFT. OWNERS MAY CONTACT WORKHORSE AT 1-877-294-6773 OR DAMON AT 574-264-2900.
ON CERTAIN CLASS A MOTOR HOMES, SOME HYDRAULIC LINES FOR THE LEVELING JACK SYSTEM MAY BE IMPROPERLY SECURED OR ROUTED TOO CLOSE TO A DRIVE TRAIN HEAT SOURCE. Remedy: DAMON WILL INSPECT AND SECURE THE CLEARANCE OF THE HYDRAULIC LEVELING HOSE THAT MAY BE TOO CLOSE TO HEAT SOURCES. THE RECALL BEGAN ON SEPTEMBER 25, 2006. OWNERS MAY CONTACT DAMON AT 1-800-860-3812.
ON CERTAIN MOTOR HOMES BUILT ON WORKHORSE CHASSIS AND EQUIPPED WITH GM 8.1L V8 ENGINES, IMPROPER HARDENING DURING THE HEAT TREATMENT PROCESS CAN CAUSE THE FUEL RAIL PULSE DAMPER RETAINER CLIP TO FRACTURE, RESULTING IN INADEQUATE RETENTION OF THE DAMPER. IF THE DAMPER BECOMES LOOSE, FUEL COULD BE PUMPED BY THE FUEL PUMP INTO THE UNDER HOOD AREA. Remedy: CHEVROLET AND WORKHORSE ARE HANDLING THE OWNER NOTIFICATION AND REMEDY FOR THIS CAMPAIGN (PLEASE SEE 06V225 AND 06V289). DEALERS WILL REPLACE THE FUEL RAIL PULSE DAMPER RETAINER CLIPS ON THESE ENGINES FREE OF CHARGE. OWNERS MAY CONTACT CHEVROLET AT 1-800-630-2438, WORKHORSE AT 877-294-6773, OR DAMON AT 1-574-264-5517.
DAMON IS RECALLING CERTAIN MODEL YEAR 2007-2011 CHALLENGER, MODEL YEAR 2005-2007 INTRUDER MOTOR HOMES. THESE MOTOR HOMES DO NOT HAVE THE PROPER CLEARANCE BETWEEN THE REAR SUSPENSION LEAF SPRING AND THE VEHICLE LIQUID PROPANE FUEL TANK. AS THE SUSPENSION TRAVELS IT IS POSSIBLE FOR THE LEAF SPRING SHACKLE BOLT TO COME IN CONTACT WITH THE TANK. THIS POTENTIALLY COULD PUNCTURE THE TANK AND RESULT IN A FIRE OR EXPLOSION. Remedy: DAMON WILL INSPECT TO SEE IF THE PROPER CLEARANCE BETWEEN THE SHACKLE BOLT AND THE TANK EXISTS. IF IT IS FOUND THERE IS NOT ENOUGH CLEARANCE, THE TANK WILL BE RELOCATED TO PROVIDE THE PROPER CLEARANCE. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 6, 2010. OWNERS MAY CONTACT DAMON WARRANTY SERVICE DEPARTMENT AT 877-855-2867.
DAMON IS RECALLING 2,415 MOTORHOMES EQUIPPED WITH AXLES THAT INCLUDE BOSCH ZOPS OR ZOHT PIN SLIDE HYDRAULIC DISC BRAKES. WHEN COMBINED WITH OCCASIONAL OR SEASONAL VEHICLE OPERATION MAY EXPERIENCE CALIPERS STICKING IN THE APPLIED POSITION. THIS CAN RESULT IN ABNORMAL HEAT GENERATION AT THE WHEEL END CAUSING BRAKE DRAG. Remedy: DEALERS WILL INSPECT AND REPLACE THE NECESSARY COMPONENTS FREE OF CHARGE. WORKHORSE IS HANDLING THE REMEDY AND OWNER NOTIFICATION FOR THIS CAMPAIGN PLEASE SEE 09V-110. OWNERS MAY CONTACT WORKHORSE AT 1-877-246-7731.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Certain motorhomes may not have the proper clearance between the rear suspension leaf spring and the vehicle liquid propane (LP) fuel tank. As the suspension travels it is possible for the leaf spring shackle bolt to come in contact with the LP tank. This potentially could puncture the tank and result in a fire or explosion. In the event of a fire or explosion, there is a potential for property damage, personal injury or death. Correction: Dealers will inspect to see if the proper clearance between the shackle bolt and the LP tank exists. If it is found there is not enough clearance, the tank will be relocated outboard in the motorhome to provide the proper clearance.
On certain motorhomes, the brake calipers may stick in the applied position. This can result in abnormal heat generation at the wheel end which, if undetected, could eventually lead to soft brake pedal condition due to brake fluid boil. Extended stopping distances may result in a vehicle crash causing property damage, personal injury or death. Correction: Dealers will affect repairs.
On certain motorhomes equipped with a Dometic Corporation refrigerator, a fatigue crack can develop in the boiler tube. This could allow the release of pressurized coolant solution into an area where an ignition source is present, which could result in a vehicle fire. Correction: Dealers will install a secondary burner housing.
On certain motorhomes equipped with Workhorse Custom Chassis, the engine fuel rail pulse damper retainer clip may fracture, resulting in inadequate retention of the damper. If the damper comes loose, a fuel leak may result in the underhood area which may result in a fire. Correction: Dealers will replace the engine fuel rail pulse damper retainer clip.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles equipped with Workhorse Custom Chassis, an incorrect steering intermediate shaft may have been installed. The incorrect part has a finer pitch spline. Use of the incorrect part may cause the spline not to match correctly with the steering gear input shaft. This could cause the spline to strip if the steering wheel is turned with a significant amount of force. This failure is likely only to occur when the vehicle is stopped or during tight turning manoeuvres at very low speeds. This condition may result in a loss of steering control. Correction: Dealers will replace the shaft.
On certain motorhomes, hydraulic lines for the levelling jack system may be improperly secured or routed too close to a drivetrain heat source. This may cause melting of the line resulting in leakage of hydraulic fluid, which could cause a fire. Correction: Dealers will inspect and, if required, secure hydraulic lines.