Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2006 Ford Ranger, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Ford Motor Company (Ford) is recalling certain 2004-2006 Ranger vehicles that may be equipped with a driver or passenger frontal air bag inflator used as a replacement service part, that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling. Remedy: Ford will notify owners, and dealers will inspect the driver and passenger air bag module, and replace either the module or the inflator, if necessary, free of charge. The recall began March 17, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S05.
Ford Motor Company (Ford) is recalling certain 2005-2014 Mustang, 2004-2011 Ranger, 2009-2011 Mercury Milan, 2006 Ford GT, 2008-2012 Fusion, 2007-2010 Edge and Lincoln MKX, and 2009-2010 Lincoln MKZ vehicles. These vehicles may be equipped with a driver or passenger frontal air bag inflator used as a replacement service part, that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling. Remedy: Ford will notify owners, and dealers will inspect the driver and passenger air bag module, and replace either the module or the inflator, if necessary, free of charge. The recall began March 17, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S05.
Ford Motor Company (Ford) is recalling certain model year 2004-2006 Ranger vehicles manufactured March 24, 2003, to May 4, 2006. Upon deployment of the driver side frontal air bag, excessive internal pressure may cause the inflator to rupture. Remedy: Ford will notify owners, and dealers will replace the air bag inflators, free of charge. The recall began February 26, 2016. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 16S03. Note: This recall supersedes 14V-343 and only applies to Rangers manufactured in North America.
Ford Motor Company (Ford) is recalling certain 2006 Ford Ranger trucks. Ford is requesting owners NOT TO DRIVE these vehicles until they have been repaired. Upon deployment of the passenger side frontal air bag, excessive internal pressure may cause the inflator to explode. On January 11, 2018, Ford Motor Company (Ford) notified NHTSA that they are recalling 2,700 model year 2006 Ranger vehicles built with passenger-side air bag inflators. As of February 9, 2018, Ford is expanding the recall to a total of 33,310 model year 2006 Ranger vehicles built with passenger-side air bag inflators. Upon deployment of the passenger side frontal air bag, excessive internal pressure may cause the inflator to explode. Remedy: Ford will notify owners instructing them to not drive their vehicles, and dealers will replace the passenger side air bag inflator with an alternate inflator, free of charge. The recall for the original population began on January 16, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 18S02.
Ford Motor Company (Ford) is recalling certain 2006 Ford Ranger trucks. Ford is requesting owners NOT TO DRIVE these vehicles until they have been repaired. On January 11, 2018, Ford Motor Company (Ford) notified NHTSA that they are recalling 2,700 model year 2006 Ranger vehicles built with driver-side air bag inflators . As of February 9, 2018, Ford is expanding the recall to a total of 33,310 model year 2006 Ranger vehicles. Upon deployment of the driver side frontal air bag, excessive internal pressure may cause the inflator to explode. Remedy: Ford will notify owners instructing them to not drive their vehicles, and dealers will replace the front driver side air bag inflator with an alternate inflator, free of charge. The recall for the original population began on January 16, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 18S02.
Ford Motor Company (Ford) is superseding a previous recall for certain 2004-2006 Ford Ranger trucks to implement a final repair. Upon deployment of the driver side frontal air bag, excessive internal pressure may cause the inflator to rupture. Remedy: Owners are advised not to drive their vehicles until the repair has been performed. Ford will notify owners, and dealers will replace the driver's frontal air bag inflator with an alternate inflator, free of charge. The recall began January 16, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 17S42. Note: This recall supersedes recall 16V-036 which was an interim repair. Vehicles that received a replacement air bag inflator under the previous campaign need to return to a dealer to have an alternate inflator installed.
Ford Motor Company (Ford) is superseding a previous recall for certain 2004-2006 Ford Ranger trucks to implement a final repair. Upon deployment of the passenger side frontal air bag, excessive internal pressure may cause the inflator to rupture. Remedy: Owners are advised not to drive their vehicles until the repair has been performed. Ford will notify owners, and dealers will replace the passenger's frontal air bag inflator with an alternate inflator, free of charge. The recall began January 16, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 17S42. Note: This recall supersedes recall 15V322 which was an interim repair. Vehicles that received a replacement air bag inflator under the previous campaign need to return to a dealer to have an alternate inflator installed. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 17S42.
Ford Motor Company (Ford) is recalling certain model year 2004-2006 Ranger trucks manufactured March 24, 2003, to May 4, 2006. The affected vehicles are equipped with a passenger side frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture. Remedy: Ford will notify owners, and dealers will replace the front passenger air bag inflator, free of charge. The recall began on December 4, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15S22. Note: This recall partially supersedes recall 14V-787.
FORD IS RECALLING CERTAIN MODEL YEAR 2011 RANGER TRUCKS BUILT FROM JANUARY 25, 2011, THROUGH APRIL 25, 2011 AT THE TWIN CITIES ASSEMBLY PLANT, AND SERVICE PARTS DISTRIBUTED TO DEALERS FOR CERTAIN 2004 THROUGH 2011 MODEL YEAR RANGER TRUCKS, 2002 THROUGH 2005 MODEL YEAR EXCURSION VEHICLES, AND 2002 THROUGH 2007 MODEL YEAR F-250, F-350, F-450, AND F-550 TRUCKS FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THE MULTI-FUNCTION SWITCH WAS SHIPPED WITH A SUBCOMPONENT (SLIDER) THAT MAY EXPERIENCE DEFORMATION. A MULTI-FUNCTION SWITCH WITH A DEFORMED SLIDER MAY MALFUNCTION CAUSING THE TURN SIGNAL, TAIL LIGHTS, HAZARD WARNING SIGNAL FLASHERS AND/OR BRAKE LIGHTS NOT TO ACTIVATE. Remedy: DEALERS WILL REPLACE THE SWITCHES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 15, 2011. OWNERS MAY CONTACT FORD MOTOR COMPANY CUSTOMER RELATIONSHIP CENTER AT 1-866-436-7332.
ON CERTAIN TRUCKS, PASSENGER CARS AND SPORT UTILITY VEHICLES, THE WINDSHIELD WIPER MOTOR MAY HAVE BEEN PRODUCED WITHOUT GREASE BEING APPLIED TO THE OUTPUT SHAFT GEAR. Remedy: DEALERS WILL INSPECT THE WIPER MOTOR FOR THE PRESENCE OF GREASE AND GREASE THE WIPER MOTOR GEARS IF NECESSARY. THE RECALL BEGAN ON NOVEMBER 22, 2005. OWNERS MAY CONTACT FORD AT 1-800-392-3673 OR LINCOLN/MERCURY AT 1-800-521-4140.
Ford Motor Company (Ford) is recalling certain 2004-2006 Ranger vehicles that received replacement front passenger air bag inflators under a previous recall. The replacement frontal passenger air bag inflators may have been installed incorrectly. Remedy: Dealers will inspect and reinstall the front passenger air bag inflator, as necessary, free of charge. Owner notification letters were mailed April 5, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23S08. This recall has been fully superseded by recall 23V-306.
Ford Motor Company (Ford) is recalling certain 2004-2006 Ranger vehicles that received replacement front passenger air bag inflators under a previous recall. The replacement front passenger air bag inflators may have been installed incorrectly. Remedy: Dealers will inspect and reinstall the front passenger air bag inflator, as necessary, free of charge. Owner notification letters were mailed May 22, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23S08. This recall expands and replaces previous recall number 23V-125.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain vehicles, the front passenger airbag may have been installed incorrectly during a previous recall repair. As a result, the airbag may not inflate properly in a crash. Note: This recall affects vehicles repaired by a Ford dealer during recalls 17S42 (Transport Canada recall 2017-633) or 18S02 (Transport Canada recall 2018-024). Safety Risk: An airbag that does not inflate properly can increase the risk of injury in a crash. Corrective Action: Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, reinstall the front passenger airbag inflator correctly.
Issue: This recall is for certain vehicles that had the driver-front and/or passenger-front airbag inflator replaced after a collision or theft. An obsolete airbag may have been installed. On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Action: The company will notify owners by mail and instruct you to take your vehicle to a Ford dealer to inspect the driver and/or passenger airbag inflator or module and replace it, if necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
We checked the EU Safety Gate for recall alerts naming this model and its production years.
Source: EU Safety Gate (European Commission) · CC BY 4.0, © European Union
The coupling device was not installed at the correct height. As a result, an attached trailer could detach while driving, or components of the coupling device or drawbar could break, potentially causing loss of vehicle control or overturning and increasing the risk of accidents and injuries. Production dates not stated in the alert. Types: 2AB.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
Issue: On certain trucks, the driver and/or passenger-front airbag inflator could rupture when the airbag deploys in a crash. If this happens, the airbag may not inflate properly and small pieces of metal could be propelled toward vehicle occupants. Safety Risk: An airbag inflator that ruptures can create a risk of injury or death. Corrective Actions: Ford advises not to drive your vehicle until the recall repairs are completed. You should contact a Ford dealer immediately to have the vehicle repaired. Ford will replace the driver and passenger-front airbag inflators.
On certain vehicles, the driver and/or passenger frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. This recall supersedes recall 2015-231 (Ford recall 15S22) and recall 2016-033 (Ford recall 16S03) for these same vehicles and inflators. The recall remedy parts for those recalls were an interim repair and must be replaced with final repair inflators. Correction: Dealers will replace the driver and passenger airbag inflator with a new design inflator.
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the front driver airbag inflator. Note: This recall is superseded by recall 2017633. Please see recall 2017633 for more information. <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2017633">Click here for more information</a>
On certain vehicles, the passenger frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace airbag inflators. Note: This recall is superseded by recall 2017633. Please see recall 2017633 for more information. <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2017633">Click here for more information</a>
On certain vehicles, the windshield wiper motor may have been produced without grease applied to the output shaft gear. After a period of continuous use on the high-speed setting, lack of grease may cause the gear teeth to distort and/or fracture during operation, resulting in the loss of wiper function. Correction: Dealers will inspect and, if required, apply grease to the output shaft gear.