Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2006 Freightliner Business Class M2, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
DAIMLER TRUCKS IS RECALLING 62,000 MY 2005-2007 FREIGHTLINER BUSINESS CLASS, CENTURY CLASS, COLUMBIA, CORONADO, FLD, CLASSIC, STERLING A-LINE, L-LINE, AND WESTERN STAR 4900 TRUCKS. A FRACTURED FUEL LINE COULD LEAK DIESEL FUEL. Remedy: HIGH PRESSURE FUEL LINES AND TRANSFER TUBES WILL BE INSPECTED AND REPLACED FREE OF CHARGED. THE RECALL BEGAN ON JULY 9, 2008. OWNERS MAY CONTACT DAIMLER TRUCKS AT 1-800-547-0712.
DAIMLER TRUCKS (DTNA) IS RECALLING CERTAIN MODEL YEAR 2006-2013 FREIGHTLINER, STERLING, AND WESTERN STAR VEHICLES, EQUIPPED WITH DETROIT DIESEL EPA07 AND EPA10, DD13 AND DD15/16 ENGINES, MANUFACTURED FROM JANUARY 20, 2006, THROUGH FEBRUARY 20, 2012. THE PUMP TO RAIL HIGH PRESSURE FUEL LINE SUPPORT SYSTEM USED ON THESE ENGINES IS SENSITIVE TO ASSEMBLY TORQUE AND MAY BE DAMAGED DURING SERVICE WORK. AS A RESULT OF OTHER REPAIRS, THE LINE SUPPORTS MAY LOOSEN, POTENTIALLY LEADING TO FUEL LINE CRACKING AND A FUEL LEAK. Remedy: DTNA WILL NOTIFY OWNERS, AND WHERE NECESSARY, THE HIGH PRESSURE FUEL LINE SUPPORT SYSTEM WILL BE REPLACED BY DTNA AUTHORIZED SERVICE FACILITIES, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON APRIL 27, 2012. OWNERS MAY CONTACT DTNA AT 1-800-547-0712.
DAIMLER TRUCKS IS RECALLING CERTAIN MODEL YEAR 2004 THROUGH 2008 HEAVY TRUCKS MANUFACTURED FROM JULY 11, 2003, THROUGH SEPTEMBER 28, 2007, EQUIPPED WITH EPA04 MODEL MBE4000 ENGINES BUILT WITH PLASTIC LOW PRESSURE FUEL LINES AND FUEL FILTERS MOUNTED NEAR THE CENTER OF THE ENGINE ON THE LEFT-HAND SIDE. THE PLASTIC LOW PRESSURE FUEL LINE BETWEEN ENGINE MOUNTED FUEL FILTER AND ENGINE BLOCK MAY DEVELOP A SUBSTANTIAL DIESEL FUEL LEAK. Remedy: DAIMLER TRUCKS WILL NOTIFY OWNERS AND THE REMEDY WILL BE PERFORMED BY DETROIT DIESEL CORPORATION AUTHORIZED REPAIR FACILITIES. VEHICLES WILL BE INSPECTED AND THE PLASTIC LOW PRESSURE FUEL LINE WILL BE REPLACED WITH A STEEL LOW PRESSURE FUEL LINE. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. AN INTERIM LETTER WAS MAILED TO OWNERS ON OCTOBER 28, 2011. THE SAFETY RECALL BEGAN ON FEBRUARY 21, 2012. OWNERS MAY CONTACT DAIMLER TRUCKS AT 1-800-547-0712.
DTNA IS RECALLING CERTAIN MODEL YEAR 2005 THROUGH 2011 FREIGHTLINER BUSINESS CLASS C2, FCCC B2 CHASSIS, S2 CHASSIS, AND MC CHASSIS MANUFACTURED BEGINNING JANUARY 19, 2005 THROUGH APRIL 16, 2010. THE STOP LAMPS MAY BE INTERMITTENT DURING LIGHT BRAKE APPLICATIONS. Remedy: DTNA WILL NOTIFY OWNERS AND REPAIRS WILL BE PERFORMED BY DTNA DEALERSHIPS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 27, 2011. OWNERS MAY CONTACT DTNA AT 1-800-547-0712.
DAIMLER TRUCKS IS RECALLING 28,764 MY 2001 THROUGH 2008 FCCC B2 AND FS65 SCHOOL BUS CHASSIS, FCCC FB65 CONVENTIONAL BUSES, AND STERLING ACTERRA, FREIGHTLINER FLN, AND BUSINESS CLASS M2 HEAVY TRUCKS, BUILT FROM JANUARY 26, 2000, THROUGH MARCH 24, 2008, MANUFACTURED WITH ARVINMERITOR OR AXLE ALLIANCE COMPANY 6,000 THROUGH 8,000 POUND FRONT AXLES UTILIZING A FOUR PIECE SPINDLE-NUT SET. THESE AXLE ASSEMBLIES MAY HAVE BEEN PRODUCED WITH A THIN SPINDLE NUT WHICH MAY LEAD TO INCORRECT END PLAY, CONE SPIN, EXCESSIVE HEAT, DEGRADATION OF LUBRICATION, WEAR OF THE SPINDLE NUT AND BEARING JOURNAL, OIL CONTAMINATION WITH METAL SHAVINGS, AND PREMATURE BEARING FAILURE. Remedy: DAIMLER TRUCKS WILL NOTIFY OWNERS AND WILL REPAIR THE VEHICLES FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 8, 2009. OWNERS MAY CONTACT DAIMLER TRUCKS AT 1-800-547-0712.
ON CERTAIN TRUCKS EQUIPPED WITH FONTAINE MODIFICATION RIGHT HAND STEERING CONTROL AND EQUIPPED WITH SIT DOWN DUAL DRIVE CONVERSIONS, THE PINCH BOLT THAT SECURES THE LOWER STEERING SHAFT CONNECTION TO THE LH MITER BOX MAY HAVE BEEN IMPROPERLY TORQUED CAUSING THE BOLTS TO FALL OUT. Remedy: DEALERS WILL INSPECT AND REPLACE THE LOWER STEERING SHAFT PINCH BOLT AT THE CONNECTION AND BOLTS ON THE STEERING CROSS SHAFT WILL BE REPLACED. THE RECALL BEGAN ON FEBRUARY 17, 2006. OWNERS MAY CONTACT FREIGHTLINER AT 1-800-547-0712.
DAIMLER TRUCKS NORTH AMERICA (DTNA) IS RECALLING 24,650 SCHOOL AND NON-SCHOOL BUSES, MOTOR HOME CHASSIS, AND TRUCKS MANUFACTURED FROM MARCH 9, 2004 THROUGH AUGUST 18, 2006, EQUIPPED WITH EPA04 CERTIFIED MBE900 ENGINES, MANUFACTURED BY DETROIT DIESEL BETWEEN MARCH 1, 2004, AND JULY 31, 2006. THE HIGH PRESSURE FUEL LINES AND TRANSFER TUBES MAY FATIGUE AND FRACTURE. Remedy: DETROIT DIESEL WILL NOTIFY OWNERS AND THE VEHICLES WILL BE REPAIRED WITH MORE ROBUST LINES AND VIBRATION DAMPERS FREE OF CHARGE. REPAIRS WILL BE PERFORMED BY AUTHORIZED DETROIT DIESEL DISTRIBUTORSHIPS. THE RECALL BEGAN ON MARCH 9, 2009. OWNERS MAY CONTACT DETROIT DIESEL 1-313-592-3708 OR DTNA TOLL-FREE AT 1-800-547-0712 FOR MORE INFORMATION.
DAIMLER TRUCKS IS RECALLING 724 MY 2006-2007 BUSINESS CLASS M2 TRUCKS. THE OPTIONAL HIGH CURRENT TAIL LAMP POWER DISTRIBUTION MODULE (PDM) WAS INSTALLED IN A LOCATION HIGHLY SUSCEPTIBLE TO WATER INTRUSION. THIS MAY LEAD TO A LOSS OF REAR LIGHTING. Remedy: DEALERS WILL RELOCATE THE PDM TO INSIDE THE CAB BEHIND THE DRIVER'S SEAT FREE OF CHARGE. THE RECALL BEGAN ON SEPTEMBER 10, 2008. OWNERS MAY CONTACT DAIMLER TRUCKS AT 1-800-547-0712.
ON CERTAIN TRUCKS BUILT WITH FRONT AXLES ASSEMBLED BY ARVINMERITOR, THE FRONT SPINDLE NUT MAY BE OVER-TIGHTENED CAUSING PRELOAD ON THE FRONT WHEEL BEARINGS WHICH COULD LEAD TO PREMATURE BEARING WEAR. Remedy: DEALERS WILL INSPECT THE FRONT HUB INSTALLATION FOR CORRECT BEARING ADJUSTMENT. IF THE BEARING ADJUSTMENT IS INCORRECT, THE FRONT WHEEL BEARINGS WILL BE REPLACED. THE RECALL BEGAN ON JUNE 28, 2007. OWNERS MAY CONTACT FREIGHTLINER AT 1-800-385-4357.
ON CERTAIN TRUCK-TRACTORS EQUIPPED WITH HOLLAND SIMPLEX SE OR SE II FIFTH WHEELS, THE LATCH LEVER PIVOT BOLT ASSEMBLY MAY HAVE BEEN OVER-TIGHTENED WHICH COULD DISTORT THE PIVOT BOLT SPACER SLEEVE. CORROSION OR CONTAMINATES IN THE PIVOT MAY CAUSE IT TO BIND AND PREVENT THE FIFTH WHEEL JAW FROM LATCHING SECURELY AROUND THE TRAILER KING PIN. Remedy: DEALERS WILL REPLACE THE PIVOT BOLT AND SLEEVE WITH A HEX HEAD SHOULDER BOLT AND WASHER. THE RECALL BEGAN ON JANUARY 3, 2008. OWNERS MAY CONTACT FREIGHTLINER AT 1-800-547-0712.
CERTAIN FREIGHTLINER SCHOOL BUS CHASSIS, HEAVY TRUCKS, AND THOMAS BUILT SCHOOL BUSES MANUFACTURED BETWEEN JULY 2002 AND JULY 3, 2007, EQUIPPED WITH BENDIX SR-7 SPRING BRAKE CONTROL VALVES. THE PARKER SCV BRASS 90 DEGREE SINGLE CHECK VALVES (SCV) WHICH ATTACH TO THE SUPPLY PORT OF A BENDIX SR-7 SPRING BRAKE MODULATING VALVE CAN BREAK APART. PIECES OF THE PARKER SCV CAN BECOME LODGED INSIDE THE SR-7 SPRING BRAKE MODULATING VALVE, POTENTIALLY CAUSING EITHER LEAKAGE OUT OF THE SR-7 VALVE OR PREVENTING AIR FROM PROPERLY EXHAUSTING FROM THE SR-7 VALVE. ALSO, DUE TO A MANUFACTURING DEFECT IN THE INTERNAL RUBBER CHECK VALVE INSIDE THE SR-7 SPRING BRAKE MODULATING VALVES, THE VALVES CAN BECOME DEFORMED AND NOT SEAT PROPERLY. Remedy: FREIGHTLINER WILL NOTIFY OWNERS AND REPAIR THE VEHICLES FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 11, 2008 TO FREIGHTLINER, STERLING, AND FREIGHTLINER CUSTOM CHASSIS OWNERS; TO THOMAS BUILT BUS OWNERS ON FEBRUARY 1, 2008. OWNERS CAN CONTACT FREIGHTLINER AT 1-800-547-0712.
ON CERTAIN TRUCKS AND MOTOR HOME CHASSIS, THE TOP FLANGE OF THE FRONT AXLE I-BEAM MAY FATIGUE AND FRACTURE. Remedy: DEALERS WILL INSPECT AND REPLACE THE FRONT AXLE ASSEMBLY. THE RECALL BEGAN ON MARCH 15, 2006, FOR PHASE I. PHASE 2 WILL BEGIN DURING AUGUST 2006. THIS RECALL IS BEING CONDUCTED IN TWO PHASES. PHASE I WILL REPLACE THE COMPLETE AXLE ASSEMBLY; AND PHASE II WILL REPLACE THE AXLE BEAM AND STEERING KNUCKLES. OWNERS MAY CONTACT FREIGHTLINER AT 1-800-547-0712.
Daimler Trucks North America LLC (DTNA) is recalling certain 2006-2020 Freightliner Columbia, 2006-2021 Freightliner Business Class M2, 2007-2020 Freightliner Coronado, 2014-2021 Freightliner 122 SD, 2007 Sterling A 9500, 2006 Freightliner Argosy, 2006-2007 Sterling AT9500, 2008-2021 Freightliner Cascadia, 2006-2008 Freightliner Classic, 2006-2011 Freightliner Century Class, 2006-2010 Freightliner FLD, and 2017 Western Star 5700 vehicles. The rear reflective tape may be partially covered by the mudflap hanger bracket, which may reduce the vehicle's visibility to other drivers on the road. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment." Remedy: DTNA will notify owners, and dealers will inspect and reposition the reflective tape to ensure that it is completely visible, as necessary, free of charge. The recall began May 29, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL848.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain trucks equipped with "Fleet Engineer" mud flaps, the bracket for the mud flaps may partially cover the rear reflective tape. Canadian regulations require that reflective tape must be visible on the rear of the truck. Safety Risk: Reflective tape that is covered may make the truck less visible to others and could create an increased risk of a crash. Corrective Actions: Daimler Trucks of North America (DTNA) will notify owners by mail and instruct you to take your truck to an authorized DTNA Service Facility to inspect the reflective tape. It will be moved as necessary to meet the regulations.
Issue: Certain trucks were built with air reservoir tanks that are too small in relation to the size of the air brake chambers. Canadian regulations require enough air reservoir capacity to ensure the brakes work even with heavy use or when there is a partial loss of the air system. Safety Risk: Reduced braking could cause extended stopping distances and increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their truck to a Daimler Trucks North America authorized service facility to modify the truck to ensure it meets Canadian regulations.
On certain vehicles equipped with Kidde fire extinguishers with black plastic handles and valves, the fire extinguishers may become clogged or require excessive force to activate. Also, the nozzle may detach from the valve assembly with enough force that it could cause injury, and fail to discharge. In case of fire, failure of the extinguisher to function could result in injury and/or property damage. Correction: Owners will be provided with instructions on how to inspect the fire extinguisher to see if it is recalled. Replacement fire extinguishers will be supplied by Kidde directly. Note: For more information about recalled fire extinguishers, please visit <a href="https://inmarmarketaction.com/kidde/Kidde284CA/">www.kidde.com</a>.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
On certain trucks equipped with a Detroit Diesel DD13, DD15 or DD16 engine, the support system for the high pressure fuel line (between the fuel pump and the fuel delivery rail) may be damaged during a service repair procedure. Incorrect torque applied to the dampener "P" clip fasteners may damage the fasteners, which could allow the clips to loosen. This could result in a cracked fuel line and a diesel fuel leak. Diesel fuel leakage may ignite on a hot engine surface and cause a fire. As well, diesel fuel spilt on the roadway could endanger other road users by making the roadway unexpectedly slippery. These issues could result in property damage and/or personal injury. Correction: Dealers will replace the high pressure fuel line and install a more robust fuel line support system.
On certain vehicles equipped with an MBE4000 (EPA07) engine, the intake air grid heater may short circuit and fail. This could result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will install an additional external relay to prevent battery connection to the grid heater when the vehicle is not running and when grid heater control signal is absent.
On certain trucks, the plastic low-pressure fuel line between the engine-mounted fuel filter and the engine block may develop a diesel fuel leak. The location of the leak is unlikely to result in a vehicle fire; however, diesel fuel spilt on the roadway could endanger other road users by making the roadway unexpectedly slippery. This could ultimately result in a vehicle crash causing property damage and/or personal injury. Correction: Dealers will replace the plastic low-pressure fuel line with a steel version.
On certain vehicles, specific operating conditions (such as tight, successive, highly banked curves in opposite directions), could trigger unintended Electronic Stability Control (ESC) system intervention. As a result, the ESC may unnecessarily apply one of the front brakes in order to correct the perceived oversteer condition. This may cause the vehicle to deviate from the intended path, thereby increasing the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the ESC module.
On certain vehicles equipped with an MBE900 (EPA04 and EPA07) engine, the intake air grid heater may short circuit and fail. This could result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will install an additional external relay to prevent battery connection to the grid heater when the vehicle is not running and when grid heater control signal is absent.
On certain vehicles, the stop lamps may operate intermittently during light braking applications. Failure of the brake lamps to illuminate when the brakes are applied may result in the following road users being unaware of the driver's intentions, increasing the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the hydraulic brake light switch assembly.
On certain vehicles, high pressure fuel lines and transfer tubes may fatigue and fracture, causing a diesel fuel leak. Fuel leakage, in the presence of an ignition source, could result in a fire. Correction: Dealers will replace the fuel lines and transfer tubes with more robust versions.
On certain trucks, the optional high current tail lamp Power Distribution Module (PDM) was installed in a location highly susceptible to water intrusion. This may lead to a loss of rear lighting, which could render the vehicle less visible to other motorists during hours of darkness, possibly resulting in a vehicle crash causing personal injury or death. Correction: Dealers will relocate the PDM.
On certain vehicles, incorrect spindle nuts may have been installed during vehicle assembly. This could cause incorrect end play, cone spin, excessive heat, degradation of lubrication, wear of the spindle nut and bearing journal, oil contamination with metal shavings, and premature bearing failure. Continued operation could lead to wheel separation, which could result in a vehicle crash. As well, this situation creates the risk that nearby bystanders or motorists be struck by a wayward wheel assembly. Either of these concerns could cause property damage, personal injury, or death. Correction: Dealers will affect repairs.
On certain trucks, the high-pressure fuel line at each injector may fatigue and fracture if a fastener at the end of the line is not properly connected. This would allow high pressure atomized diesel fuel to enter the engine compartment, creating a risk of fire, which could result in property damage, personal injury, or death. Correction: Dealers will affect repairs.
Certain trucks fail to comply with the requirements of CMVSS 108 - Lighting System and Retroreflective Devices. The front reflex reflectors were omitted during vehicle assembly. This could render the vehicle less visible to other motorist during hours of darkness, possibly resulting in a vehicle crash causing injuries or death. Correction: Dealers will install side reflex reflectors to the hood.
On certain trucks, the fifth wheel hitch assembly's lever arm may have been incorrectly installed during the manufacturing process. The lever arm pivot bolt may have been over-tightened which could distort the pivot bolt spacer sleeve and prevent the fifth wheel latch jaw from closing and latching securely around the trailer king pin. This could allow the towed unit to separate from the towing vehicle while underway, potentially causing a crash with injury or death. Correction: Dealers will replace the pivot bolt and sleeve with a hex head shoulder bolt and washer.