Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2006 GMC W4500, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Isuzu Manufacturing Services of America (Isuzu) is recalling certain model year 2006-2008 Isuzu NPR and NPR-HD and Chevrolet W3500 and W4500 trucks manufactured March 16, 2005, to August 13, 2008 and 2006-2008 GMC W3500 and W4500 trucks manufactured July 18, 2005, to August 13, 2008. The affected vehicles have a fuel tank that may corrode and leak fuel. Remedy: Isuzu will notify owners, and dealers will replace the fuel tank, free of charge. Isuzu issued an interim notification to owners on December 18, 2015. The recall began on April 8, 2016. Owners may contact Isuzu customer service at 1-866-441-9638.
ISUZU IS RECALLING 16,859 MY 2006-2007 ISUZU NPR, NQR, NRR, GMC W3500, W4500, W5500 AND CHEVROLET W3500, W4500, W5500 TRUCKS EQUIPPED WITH DIESEL ENGINES. DIESEL FUEL MAY SEEP OR LEAK FROM THE FUEL PIPE AT THE UPPER OR LOWER FUEL PORT ON THE DIESEL FUEL SUPPLY PUMP. Remedy: DEALERS WILL INSPECT THE VEHICLES AND IF NO SEEPAGE OR LEAKAGE IS DETECTED, THE FUEL PIPE FITTINGS WILL BE TIGHTENED. IF SEEPAGE OR LEAKAGE IS DETECTED, THE FUEL SUPPLY PUMP WILL BE REPLACED WITH A NEW ONE. THE RECALL WILL BEGIN ON JUNE 30, 2008. OWNERS MAY CONTACT ISUZU AT 1-800-255-6727, GMC AT 1-866-996-9463, OR CHEVROLET AT 1-800-630-2438..
ISUZU IS RECALLING CERTAIN MODEL YEAR 2006-2007 ISUZU NPR, NQR, NRR, GMC W3500, W4500, W5500, AND CHEVROLET W3500, W4500, AND W5500 VEHICLES. THE OIL PIPE BOLTS WERE NOT TIGHTENED PROPERLY DURING THE VEHICLE PRODUCTION PROCESS. IF NOT ADEQUATELY TIGHTENED, THE BOLT MAY LOOSEN AFTER PROLONGED VEHICLE OPERATION, WHICH CAN RESULT IN OIL SEEPAGE OR LEAKAGE FROM THE PACKING SEALS. IN GENERAL, AS OIL IS LOST, THE OIL WARNING LAMP WILL ILLUMINATE, AND THERE MAY BE ABNORMAL ENGINE NOISE AND LOSS OF OIL CAN CAUSE ENGINE SEIZURE. Remedy: DEALERS WILL REPLACE THE PACKING SEALS WITH NEW ONES AND THE BOLT WILL BE TIGHTENED WITH A SPECIFIED TORQUE. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JANUARY 28, 2011. OWNERS MAY CONTACT ISUZU AT 1-800-255-6727.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain vehicles equipped with an oil pan heater, over time, dust, dirt and moisture may collect at the contact point between the oil pan heater cord and the extension cord. As a result, the extension cord could overheat, which may melt the oil pan heater plug and/or block heater plug (if equipped). This could result in a fire causing property damage and/or personal injury. Correction: Dealers will inspect and clean the oil pan heater plug and the engine block heater plug (if equipped). Heat damaged plugs will be replaced. In addition, dealers will replace the extension cord and advise owners to store the cord indoors when not in use.
On certain vehicles, the bolt that connects the engine lubrication oil pipe to the vacuum pump may not have been tightened properly during vehicle assembly. If not adequately tightened the bolt may loosen after prolonged vehicle operation, which can result in oil seepage or leakage from the packing seals. Normally, as oil is lost, the oil warning lamp will illuminate and there may be abnormal engine noise. However, if the problem is not addressed, the loss of oil can cause engine seizure. If the engine seizes while the vehicle is being driven, the vehicle may experience sudden deceleration, which could result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the packing seals and tighten the bolt to specified torque.
On certain trucks, the fuel pump may develop a diesel fuel leak as a result of improper assembly process at the factory. Fuel leakage, in the presence of an ignition source, could result in a vehicle fire, causing property damage, personal injury, or death. Correction: Dealers will inspect and, if no seepage or leakage is detected, the fuel pipe fittings will be tightened to specifications. However, should seepage or leakage be discovered, the fuel supply pump would be replaced.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain