Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2006 Holiday Rambler Admiral SE, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
MONACO IS RECALLING 202 MY 2006 MONARCH SE, MY 2009 RIPTIDE, MY 2006 HOLIDAY RAMBLER ADMIRAL SE, MY 2007-2009 ARISTA, MY 2007-2009 SAFARI PASSAGE, MY 2006 SIMBA AND TREK GAS, AND MY 2006-2007 R-VISION TRAIL-LITE AND TRAIL-AIRE MOTOR HOMES BUILT ON WORKHORSE CHASSIS. THE CASTLE NUT THAT RETAINS THE STEERING DRAG LINK TO THE PITMAN ARM MAY HAVE BEEN IMPROPERLY TORQUED DURING ASSEMBLY. THE IMPROPER TORQUE MAY HAVE DAMAGED THE CASTLE NUT AND COMPROMISED THE INTEGRITY OF THE CONNECTION. Remedy: MONACO IS WORKING WITH WORKHORSE TO REPLACE AND PROPERLY TIGHTEN THE CASTLE NUT THAT RETAINS THE STEERING DRAG LINK TO THE PITMAN ARM (PLEASE SEE 08V442). OWNERS MAY CONTACT WORKHORSE AT 1-877-946-7731 OR MONACO AT 1-800-685-6545.
CERTAIN MOTOR HOME CHASSIS BUILT ON WORKHORSE CHASSIS MAY HAVE BEEN EQUIPPED WITH INCORRECT STEERING INTERMEDIATE SHAFTS. THE SPLINE CAN STRIP WHILE THE STEERING WHEEL IS BEING TURNED. Remedy: WORKHORSE IS CONDUCTING THIS RECALL (PLEASE SEE 06V148000) AND WILL INSPECT AND, IF NECESSARY, REPLACE THE STEERING INTERMEDIATE SHAFT. OWNERS MAY CONTACT WORKHORSE AT 1-877-294-6773 OR MONACO AT 1-800-685-6545.
ON CERTAIN MOTOR HOMES BUILT ON WORKHORSE CHASSIS AND EQUIPPED WITH GM 8.1L V8 ENGINES, IMPROPER HARDENING DURING THE HEAT TREATMENT PROCESS CAN CAUSE THE FUEL RAIL PULSE DAMPER RETAINER CLIP TO FRACTURE, RESULTING IN INADEQUATE RETENTION OF THE DAMPER. IF THE DAMPER BECOMES LOOSE, FUEL COULD BE PUMPED BY THE FUEL PUMP INTO THE UNDER HOOD AREA. Remedy: WORKHORSE IS HANDLING THE OWNER NOTIFICATION AND REMEDY FOR THIS CAMPAIGN (PLEASE SEE 06V225). DEALERS WILL REPLACE THE FUEL RAIL PULSE DAMPER RETAINER CLIPS ON THESE ENGINES FREE OF CHARGE. OWNERS MAY CONTACT WORKHORSE AT 877-294-6773 OR MONACO AT 1-800-685-6545.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain vehicles, the castle nut that retains the steering drag link to the pitman arm may have been improperly torqued during assembly. The improper torque may have damaged the castle nut and compromised the integrity of the connection. If the drag link separated from the pitman arm, the driver would loose directional control of the vehicle which could result in a vehicle crash causing injury or death. Correction: Dealers will replace and properly torque the castle nuts on all suspect vehicles.
On certain vehicles, the middle side marker lights that are non-reflective do not comply with Canada Motor Vehicle Safety Standard 108. Correction: Dealers will install a reflector at the mid-point.
On certain Workhorse Custom Chassis equipped motorhomes, the engine fuel rail pulse damper retainer clip may fracture, resulting in inadequate retention of the damper. If the damper comes loose, a fuel leak may result in the underhood area which may cause a fire. Correction: Dealers will replace the engine fuel rail pulse damper retainer clip.
On certain motorhomes equipped with Workhorse Custom Chassis, the engine fuel rail pulse damper retainer clip may fracture, resulting in inadequate retention of the damper. If the damper comes loose, a fuel leak may result in the underhood area which may result in a fire. Correction: Dealers will replace the engine fuel rail pulse damper retainer clip.
On certain vehicles equipped with Workhorse Custom Chassis, an incorrect steering intermediate shaft may have been installed. The incorrect part has a finer pitch spline. Use of the incorrect part may cause the spline not to match correctly with the steering gear input shaft. This could cause the spline to strip if the steering wheel is turned with a significant amount of force. This failure is likely only to occur when the vehicle is stopped or during tight turning manoeuvres at very low speeds. This condition may result in a loss of steering control. Correction: Dealers will replace the shaft.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain