Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2006 Kia Sedona, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
ON CERTAIN PASSENGER VEHICLES EQUIPPED WITH ADJUSTABLE BRAKE PEDALS, THE STOP LAMP SWITCH WIRING HARNESS MAY BE OUT OF POSITION. AN IMPROPERLY POSITIONED STOP LAMP SWITCH WIRING HARNESS COULD MAKE CONTACT WITH THE U-JOINT ASSEMBLY OF THE STEERING COLUMN. REPEATED CONTACT MAY EVENTUALLY CAUSE THE WIRING HARNESS INSULATION TO CHAFE. Remedy: DEALERS WILL INSPECT THE WIRING HARNESS FOR CHAFING AND, REPAIR IF NECESSARY. IN ADDITION, THE DEALER WILL SECURE THE WIRING HARNESS TO PREVENT CONTACT WITH THE U-JOINT ASSEMBLY. THE RECALL BEGAN ON SEPTEMBER 29, 2006. OWNERS MAY CONTACT KIA AT 1-800-333-4542.
ON CERTAIN PASSENGER VEHICLES, THE REAR CALIPER BRAKE HOSES MAY BE OUT OF POSITION. AN IMPROPERLY POSITIONED REAR CALIPER BRAKE HOSE MAY CONTACT REAR SUSPENSION COMPONENTS AND OVER TIME BREACH THE INTEGRITY OF THE HOSE. Remedy: DEALERS WILL INSPECT THE POSITIONING OF THE REAR CALIPER BRAKE HOSES AND ADJUST OR REPLACE THEM FREE OF CHARGE. THE RECALL BEGAN ON SEPTEMBER 15, 2006. OWNERS MAY CONTACT KIA AT 1-800-333-4542.
Kia Motors America (Kia) is recalling certain 2006-2010 Sedona and 2007-2009 Sorento vehicles. Moisture may enter the Anti-lock Brake (ABS) Module and result in an electrical short. Remedy: Kia will notify owners, and dealers will install a relay in the main junction box to prevent power from being directed to the HECU when the vehicle's ignition switch is turned off, free of charge. The recall began June 5, 2020. Owners may contact Kia customer service at 1-800-333-4542. Kia's number for this recall is SC186.
Kia Motors Corporation (Kia) is recalling certain model year 2006-2012 Kia Sedona vehicles manufactured from June 15, 2005, through August 14, 2012 and originally sold in, or currently registered in Alaska, Connecticut, Delaware, Illinois, Indiana, Iowa, Kansas, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, Nebraska, New Hampshire, New Jersey, New York, North Dakota, Ohio, Pennsylvania, Rhode Island, South Dakota, Utah, Vermont, West Virginia, Wisconsin and the District of Columbia. In the affected vehicles, the front lower control arms may break due to corrosion from salt water exposure such as from road salt use. Remedy: Kia will notify owners and dealers will replace the front lower control arms on 2006-2007 models. 2008-2012 models will either have their front lower control arms replaced or additional anti-corrosion coating will be applied. These repairs will be performed free of charge. The recall began on July 27, 2016. Owners may contact Kia at 1-800-333-4542. Kia's number for this recall is SC133.
Kia Motors Corporation (Kia) is recalling certain model year 2006-2014 Kia Sedona vehicles manufactured from June 15, 2005, through April 04, 2014. In the affected vehicles, the secondary hood latch may bind and remain in the unlatched position when the hood is closed. Remedy: Kia will notify owners and dealers will replace the secondary hood latch or clean and lubricate the latch, depending on the vehicle's location and the condition of the latch. These repairs will be performed free of charge. The recall began on July 27, 2016. Owners may contact Kia at 1-800-333-4542. Kia's recall number is SC134.
HUYNDAI-KIA IS RECALLING 139,844 MY 2006-2007- SEDONA, SPORTAGE, SORENTO AND MY RONDO AND AMANTI VEHICLES. THE STOP LAMP SWITCH IN THE AFFECTED VEHICLES MAY MALFUNCTION. A MALFUNCTIONING STOP LAMP SWITCH MAY CAUSE THE BRAKE LIGHTS TO NOT ILLUMINATE WHEN THE BRAKE PEDAL IS DEPRESSED OR MAY CAUSE THE BRAKE LIGHTS TO REMAIN ILLUMINATED WHEN THE BRAKE PEDAL IS RELEASED. A STOP LAMP SWITCH MALFUNCTION MAY ALSO AFFECT THE OPERATION OF THE BRAKE-TRANSMISSION SHIFT INTERLOCK FEATURE SO THE TRANSMISSION SHIFTER WOULD NOT BE ABLE TO BE SHIFTED OUT OF THE PARK POSITION. IT MAY ALSO CAUSE THE ELECTRONIC STABILITY CONTROL (ESC) MALFUNCTION LIGHT TO ILLUMINATE, AND IT MAY NOT DEACTIVATE THE CRUISE CONTROL WHEN THE BRAKE PEDAL IS DEPRESSED. Remedy: DEALERS WILL REPLACE THE STOP LAMP SWITCH FREE OF CHARGE. THE RECALL BEGAN ON JUNE 17, 2009. OWNERS MAY CONTACT KIA'S CONSUMER ASSISTANCE CENTER AT 1-800-333-4542.
Kia Motors Corporation (Kia) is recalling certain model year 2006-2012 Kia Sedona vehicles manufactured from June 15, 2005, through August 14, 2012 originally sold in, or currently registered in Massachusetts, Maryland, Michigan, New Hampshire, New York, Pennsylvania, Vermont, Wisconsin, Connecticut, Delaware, Iowa, Illinois, Indiana, Maine, Minnesota, Missouri, New Jersey, Ohio, Rhode Island, West Virginia or the District of Columbia. In the affected vehicles, the front lower control arms may break due to corrosion resulting from prolonged exposure to salty environments. Remedy: Kia will notify owners and dealers will inspect the degree of corrosion of the front lower control arms, and will either rustproof or replace them, free of charge. The recall began on December 20, 2013. Owners may contact Kia at 1-800-333-4542. Kia's recall number is SC100.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain vehicles, moisture can enter the brake Hydraulic Electronic Control Unit (HECU) and cause a short circuit. Safety Risk: A short circuit could create a fire risk. This can happen even if the vehicle is parked. Corrective Actions: Kia will notify owners by mail and instruct you to take your vehicle to a dealer to install a relay to power off the HECU when the vehicle is turned off. Kia recommends that you should park your vehicle outdoors, and away from other vehicles or structures until the recall repairs have been completed.
On certain vehicles, road salt can corrode the front control arms, which may ultimately lead to control arm failure. This could result in a loss of vehicle control, increasing the risk of a crash causing injury and/or property damage. Correction: For 2006-2007 model year vehicles, dealers will replace the front lower control arms if they were not previously replaced under recall 2013-388. For 2008-2012 model year vehicles, dealers will inspect the control arms and either apply an anticorrosion treatment or replace the control arms, as necessary. Note: This recall supersedes recall 2013-388.
On certain vehicles, the secondary hood latch could corrode, and may result in the mechanical binding of the latch. This could cause the secondary hood latch to remain in the open position when the hood is closed. If the vehicle were to be driven with the primary hood latch disengaged, there is a potential that the secondary hood latch may not hold the hood closed as designed while the vehicle is in motion. If this were to occur, it could compromise the driver’s ability to see the road and its users, as well as cause damage to the windshield. These issues could result in a crash causing injury and/or property damage. Correction: Dealers will replace the secondary latch with an improved secondary latch with an enhanced corrosion coating.
We checked the EU Safety Gate for recall alerts naming this model and its production years.
Source: EU Safety Gate (European Commission) · CC BY 4.0, © European Union
Production: Vehicles produced from 15 June 2005 to 4 April 2014..
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, road salt can corrode the front control arms, which may ultimately lead to control arm failure. This could result in a loss of vehicle control, increasing the risk of a crash causing injury and/or property damage. Correction: Dealers will inspect the control arms and either apply an anticorrosion treatment or replace control arms, as necessary.
On certain vehicles, the stop lamp switch may have been incorrectly installed during vehicle assembly. This could prevent proper brake lamp operation. Failure of the brake lamps to illuminate when the brakes are applied may result in the following road users being unaware of the driver's intentions, increasing the risk of a crash causing injury or death. A malfunction of the switch may also cause the brake lamps to remain illuminated when the brake pedal is released. Additionally, a faulty switch may affect the operation of the brake-transmission shift interlock on automatic transmission-equipped vehicles so that the transmission shifter would not be able to be shifted out of PARK position. It may also cause the Electronic Stability Control (ESC) light to illuminate, and it may not deactivate the cruise control when the brake pedal is depressed. Correction: Dealers will replace the stop lamp switch assembly.
On certain vehicles equipped with adjustable brake pedals, the stop lamp switch wiring harness may be out of position. An improperly positioned harness could make contact with the u-joint assembly of the steering column. Repeated contact may eventually cause the wiring harness insulation to chafe. An electrical short could result in the loss of brake lights, engine stalling, or an inability to start the vehicle. Correction: Dealers will reposition the wiring harness.
On certain vehicles the rear brake caliper hoses may be out of position. This could allow contact with the rear suspension, resulting in loss of brake fluid and a reduction of braking ability causing a crash. Correction: Dealers will adjust or replace the hoses as necessary.