Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2007 Honda GL1800, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
HONDA IS RECALLING CERTAIN MODEL YEAR 2001-2010, AND MODEL YEAR 2012 GL1800 GOLDWING MOTORCYCLES. UNDER CERTAIN CONDITIONS, THERE IS A POSSIBILITY THAT THE COMBINED BRAKING SYSTEM'S SECONDARY MASTER CYLINDER MAY CAUSE THE REAR BRAKE TO DRAG. Remedy: HONDA WILL NOTIFY OWNERS, AND DEALERS WILL INSPECT THE SECONDARY MASTER CYLINDER AND IF NECESSARY, REPLACE IT, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JANUARY 6, 2012. OWNERS MAY CONTACT HONDA CUSTOMER SERVICE AT 1-866-784-1870.
Honda (American Honda Motor Co.) is recalling certain 2006-2009 and 2012 Honda GL1800 (Goldwing) motorcycles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, if not included in "Zone A," Honda is recalling certain 2006-2009 Honda GL1800 (Goldwing) motorcycles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Additionally, if not included in Zone A or Zone B above, Honda is recalling certain 2006-2008 Honda GL1800 (Goldwing) motorcycles originally sold, or ever registered, in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. Remedy: Honda will notify owners, and dealers will replace the air bag module, free of charge. The recall began February 2017. Owners may contact Honda Motorcycle Customer Support at 1-866-784-1870. Honda's number for this recall is KE5.
American Honda Motor Co., Inc. (Honda) is recalling certain model year 2001-2010 and 2012-2015 GL1800, 2001-2005 GL1800A and 2013-2015 GL1800B motorcycles. The rear brakes of the affected motorcycles may drag after the brakes are released. Remedy: Honda will notify owners, and dealers will replace the secondary brake master cylinder and the rear brake master cylinder, and flush the brake fluid, free of charge. The recall began on December 7, 2015. Owners may contact Honda customer service at 1-866-784-1870. Honda's number for this recall is JV6. Note: This recall supercedes recall 14V-472.
Honda (American Honda Motor, Inc.) is recalling certain model year 2006-2010 Honda GL1800 (Gold Wing) motorcycles manufactured February 8, 2006, to May 14, 2009 originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Honda is recalling certain model year 2006-2008 Honda GL 1800 (Gold Wing) motorcycles manufactured May 10, 2007, to May 14, 2009 originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Motorcycles not originally sold or ever registered in either Zones A or B are not subject to this safety recall. These motorcycles are equipped with an air bag inflator assembled as part of the air bag module, used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the air bag, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. Remedy: Honda will notify owners, and dealers will replace the air bag module containing the inflator, free of charge. Honda distributed an interim notification to owners on July 19, 2016. Owners may contact Honda customer service at 1-866-784-1870. Honda's number for this recall is KA8.
KURYAKYN IS RECALLING CERTAIN AFTERMARKET PASSENGER FLOORBOARD MOUNTS, PART NUMBER 607005, SOLD AND INSTALLED FOR USE ON 2001-2012 HONDA GL 1800 (GOLDWING) MOTORCYCLES. THIS MOUNT WAS SOLD ON KURYAKYN 'TRANSFORMER' PASSENGER FLOORBOARD SETS, PART NUMBER 7005 FROM SEPTEMBER 15, 2008, TO PRESENT. THE FLOORBOARD MOUNT MAY CRACK AND BREAK FREE FROM THE MOUNTING BOLTS THAT SECURE THE MOUNT TO THE MOTORCYCLE. Remedy: KURYAKYN WILL NOTIFY OWNERS AND PROVIDE REPLACEMENT MOUNT KITS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JANUARY 13, 2012. OWNERS MAY CONTACT KURYAKYN AT 1-866-296-4728.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain motorcycles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the airbag. This could cause the airbag to deploy with more force than normal. As a result, if the motorcycle were involved in a collision that warrants airbag deployment, fragments could be propelled toward motorcycle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the airbag module. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
On certain motorcycles, the combined brake system's secondary master cylinder may cause the rear brakes to drag. Continued riding with the rear brake engaged/dragging may generate enough heat to cause the rear brake to catch fire. These issues could result in injury and/or property damage. Unexpected braking may also adversely affect vehicle stability, which could result in a crash. Correction: Dealers will replace the secondary master cylinder with one that has a modified check valve. In addition to replacing the secondary master cylinder, dealers will also replace the rear master cylinder and flush the brake fluid. Note: This recall supersedes recall 2014-326. All vehicles having been inspected and/or serviced under the previous recall will require re-inspection and repair.
On certain motorcycles, the combined brake system’s secondary master cylinder may cause the rear brakes to drag. Unexpected braking may adversely affect vehicle stability, which could result in a crash. As well, continued riding with the rear brake engaged/dragging may generate enough heat to cause the rear brake to catch fire. These issues could result in property damage and/or personal injury. Note: This recall is superseded by recall 2015488.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
On certain motorcycles, the combined brake system’s secondary master cylinder may cause the rear brakes to drag. Unexpected braking may adversely affect vehicle stability, which could result in a crash. As well, continued riding with the rear brake engaged/dragging may generate enough heat to cause the rear brake to catch fire. These issues could result in property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the secondary master cylinder with an updated version.