Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2007 Winnebago Sightseer, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
WINNEBAGO IS RECALLING 717 MY 2006-2009 SIGHTSEER AND VISTA, ITASCA SUNOVA AND SUNSTAR MOTOR HOMES BUILT ON WORKHORSE CHASSIS. THE CASTLE NUT THAT RETAINS THE STEERING DRAG LINK TO THE PITMAN ARM MAY HAVE BEEN IMPROPERLY TORQUED DURING ASSEMBLY. THE IMPROPER TORQUE MAY HAVE DAMAGED THE CASTLE NUT AND COMPROMISED THE INTEGRITY OF THE CONNECTION. Remedy: WINNEBAGO IS WORKING WITH WORKHORSE TO REPLACE AND PROPERLY TIGHTEN THE CASTLE NUT THAT RETAINS THE STEERING DRAG LINK TO THE PITMAN ARM (PLEASE SEE 08V442). OWNERS MAY CONTACT WORKHORSE AT 1-877-946-7731 OR WINNEBAGO AT 1-641-585-3535.
WINNEBAGO IS RECALLING 31 MY 2006-2008 JOURNEY, VOYAGE, MY 2006-2007 SIGHTSEER, MY 2006 ADVENTURER, MINNIE WINNIE, MY 2007 ACCESS, TOUR, VECTRA, ITASCA CAMBRIA, AND MY 2007-2008 ITASCA HORIZON MOTOR HOMES EQUIPPED WITH RICON PLATFORM STYLE WHEELCHAIR LIFTS. THESE MOTOR HOMES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 404, "PLATFORM LIFT INSTALLATIONS IN MOTOR VEHICLES." THE THRESHOLD WARNING SYSTEM MAY NOT DETECT THE PRESENCE OF A WHEELCHAIR OR MOBILITY AID USER IN A CERTAIN SPOT WITHIN THE DEFINED THRESHOLD AREA. Remedy: WINNEBAGO IS WORKING WITH RICON TO CORRECT THE WHEELCHAIR LIFTS FREE OF CHARGE (PLEASE SEE 07E095). THE RECALL BEGAN ON APRIL 9, 2008. OWNERS MAY CONTACT RICON AT 1-818-267-3000.
CERTAIN MOTOR HOMES BUILT ON WORKHORSE CHASSIS MAY HAVE BEEN EQUIPPED WITH INCORRECT STEERING INTERMEDIATE SHAFTS. THE STEERING COULD BECOME LOOSE AT THE STEERING BOX DURING TIGHT STEERING MANEUVERS. Remedy: WORKHORSE IS CONDUCTING THIS RECALL (PLEASE SEE 06V148000) AND WILL INSPECT AND, IF NECESSARY, REPLACE THE STEERING INTERMEDIATE SHAFT. OWNERS MAY CONTACT WORKHORSE AT 1-877-294-6883 OR WINNEBAGO AT 1-641-585-3535.
WINNEBAGO IS RECALLING CERTAIN MODEL YEAR 2005 THROUGH 2009 WINNEBAGO SIGHTSEER AND ITASCA SUNOVA MOTOR HOMES BECAUSE THE DINETTE AREA SEAT BELT RESTRAINTS ON THOSE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 210, "SEAT BELT ASSEMBLY ANCHORAGES." IN A COLLISION, THE GENERATED CRASH FORCES CAN CAUSE THE RESTRAINT'S ATTACHMENT TO TEAR AND ALLOW THE ANCHOR TO SEPARATE FROM THE BODY OF THE VEHICLE. Remedy: WINNEBAGO WILL NOTIFY OWNERS A DEALERS WILL REPAIR THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON DECEMBER 10, 2010. OWNERS MAY CONTACT WINNEBAGO AT 1-800-537-1885.
WINNEBAGO IS RECALLING CERTAIN RECREATIONAL VEHICLES EQUIPPED WITH 1200-SERIES NORCOLD REFRIGERATORS. THE POPULATION OF REFRIGERATORS BEING ADDRESSED CONTAINS EITHER A SENSING ALGORITHM OR THERMAL SWITCH TO SHUT OFF POWER TO THE REFRIGERATOR WHEN HIGH TEMPERATURES ARE DETECTED IN ORDER TO PREVENT A POTENTIAL FIRE. THE RESPONSE TIMES OF THE SENSOR ALGORITHM AND THERMAL SWITCH DEVICES TO STOP POWER ARE NOT SUFFICIENT. Remedy: WINNEBAGO IS WORKING WITH NORCOLD TO IDENTIFY AND NOTIFY ANY AFFECTED OWNERS. OWNERS WILL BE INSTRUCTED TO CONTACT NORCOLD DEALERS TO RECEIVE THE REMEDY FREE OF CHARGE. PLEASE SEE NORCOLD'S DEFECT REPORT 10E-049 FOR ADDITIONAL INFORMATION. THE RECALL BEGAN DURING DECEMBER 2010. OWNERS MAY CONTACT NORCOLD AT 1-800-767-9101 OR WINNEBAGO AT 1-641-585-3535.
WINNEBAGO IS RECALLING 31 MY 2006-2008 ITASCA CAMBRIA, HORIZON, WINNEBAGO ACCESS, ADVENTURER, JOURNEY, MINNIE WINNIE, SIGNTSEER, TOUR, VECTRA, AND VOYAGE MOTOR HOMES EQUIPPED WITH RICON PLATFORM STYLE WHEELCHAIR LIFTS. THESE LIFTS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 403, "PLATFORM LIFT SYSTEMS FOR MOTOR VEHICLES." THE ANTI-STOW INTERLOCK MAY NOT DETECT THE PRESENCE OF A WHEELCHAIR OR MOBILITY AID USER. THE PRESSURE SENSING SWITCH THAT DETECTS THE PRESENCE OF WEIGHT ON THE PLATFORM WAS NOT ADJUSTED TO THE NECESSARY SENSITIVITY LEVEL. THE LIFT COULD STOW EVEN THOUGH SOMEONE OR SOMETHING IS STILL ON THE LIFT. Remedy: WINNEBAGO IS WORKING WITH RICON TO CORRECT THE WHEELCHAIR LIFTS (PLEASE SEE 07E097). OWNERS MAY CONTACT RICON AT 1-800-322-2884 OR WINNEBAGO AT 1-641-585-3535.
WINNEBAGO IS RECALLING VEHICLES EQUIPPED WITH AXLES THAT INCLUDE BOSH ZOPS OR ZOHT PIN SLIDE HYDRAULIC DISC BRAKES. WHEN COMBINED WITH OCCASIONAL OR SEASONAL VEHICLE OPERATION MAY EXPERIENCE CALIPERS STICKING IN THE APPLIED POSITION. THIS CAN RESULT IN ABNORMAL HEAT GENERATION AT THE WHEEL END CAUSING BRAKE DRAG. THE DRIVER WOULD NORMALLY HAVE WARNING OF THE BRAKE DRAG IF UNDETECTED BY THE DRIVER. Remedy: DEALERS WILL INSPECT AND REPLACE THE NECESSARY COMPONENTS FREE OF CHARGE WORKHORSE IS HANDLING THE REMEDY FOR THIS CAMPAIGN PLEASE SEE 09V-110. THE MANUFACTURER HAS NOT YET PROVIDED AN OWNER NOTIFICATION SCHEDULE. OWNERS MAY CONTACT WORKHORSE AT 1-877-246-7731 OR WINNEBAGO AT 1-641-585-3535.
WINNEBAGO IS RECALLING MODEL YEAR 2007-2008 ACCESS, ASPECT, SIGHTEER AND VISTA, MODEL YEAR 2007-2008 ITASCA IMPULSE, CAMBRIA, SUNOVA, AND SUNSTAR, MODEL YEAR 2009-2010 WINNEBAGO ACCESS, SIGHTSEER AND VISTA, MODEL YEAR 2009-2010 ITASCA IMPULSE, SUNOVA, AND SUNSTAR MOTOR HOMES. THESE MOTOR HOMES MAY HAVE A MISSING STOVE PARTITION THAT ISOLATES THE FURNACE AIR. Remedy: DEALERS WILL CORRECT THIS SITUATION BY INSTALLING A STOVE PARTITION THAT ISOLATES THE STOVE FROM THE FURNACE RETURN AIR AT NO CHARGE TO THE OWNER. THE RECALL BEGAN ON SEPTEMBER 30, 2009. OWNERS MAY CONTACT WINNEBAGO AT 1-800-537-1885.
ON CERTAIN MOTOR HOMES, IF THE BATTERY BOOST SWITCH IS ENGAGED WHILE THE ENGINE IS OPERATING, THE ENGINE MAY SHUT DOWN. Remedy: DEALERS WILL INSTALL A DIODE WIRE ASSEMBLY ON THE AUXILIARY START SOLENOID. THE RECALL BEGAN ON MAY 11, 2007. OWNERS CAN CONTACT WINNEBAGO AT 1-800-537-1885.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Certain refrigerators used in Recreational Vehicles (RVs) contain either a sensing algorithm or a thermal switch to interrupt power when it detects high temperatures that could lead to a fire. An insufficient response time can result in the power not being shut-off in sufficient time to prevent a fire, which could result in property damage and/or personal injury. Correction: Dealers will install a thermocouple with a faster response time for all refrigerators with a sensing algorithm or a thermal switch.
On certain motorhomes, the dinette area seatbelts may not conform to Canada Motor Vehicle Safety Standards 210 - Seatbelt Assembly Anchorages. The final design did not include the steel plate as required by the Standard. During a crash, stress can cause the attachment to tear and allow the anchor to separate from the body of the vehicle Failure of the seatbelt anchorage to restrain the occupant as intended would increase the risk of personal injuries during a crash. Correction: Dealers will install additional seatbelt anchorage reinforcement plates.
Certain motorhomes may be missing a stove partition designed to isolate the furnace return air. Should this be the case, and if the furnace is operated at the same time as the stove, the stove flame may go out while propane gas continues to flow. A propane gas leak, in the presence of an ignition source, could result in a fire or an explosion, which could cause property damage, personal injury or death. Correction: Dealers will install a stove partition.
On certain motorhomes, the brake calipers may stick in the applied position. This can result in abnormal heat generation at the wheel end which, if undetected, could eventually lead to soft brake pedal condition due to brake fluid boil. Extended stopping distances may result in a vehicle crash causing property damage, personal injury or death. Correction: Dealers will affect repairs.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, the castle nut that retains the steering drag link to the pitman arm may have been improperly torqued during assembly. The improper torque may have damaged the castle nut and compromised the integrity of the connection. If the drag link separated from the pitman arm, the driver would loose directional control of the vehicle which could result in a vehicle crash causing injury or death. Correction: Dealers will replace and properly torque the castle nuts on all suspect vehicles.
On certain motorhomes using Ricon "S" or "K" series wheelchair lift platforms, the anti-stow interlock may not detect the presence of a wheelchair/mobility aid user. This scenario could cause the lift to stow even though someone is still on lift and could result in personal injuries to a user. Correction: Dealer will adjust the sensitivity level of the anti-stow pressure switch.
On this motorhome, the Ricon Corporation platform lift system may not detect the presence of a wheelchair or mobility aid user in a certain spot within the defined threshold area. Should the threshold warning system fail to operate, the lift user can fall from the vehicle and be seriously injured. Correction: Dealers will install a retrofit kit.
On certain motorhomes, if the battery boost switch is engaged while the engine is operating, the engine may shut down possibly causing a loss of vehicle control with the potential for personal injury and/or vehicle and property damage. Correction: Dealers will install a diode and ground wire to the auxiliary start solenoid.
On certain motorhomes equipped with Workhorse Custom Chassis, the engine fuel rail pulse damper retainer clip may fracture, resulting in inadequate retention of the damper. If the damper comes loose, a fuel leak may result in the underhood area which may result in a fire. Correction: Dealers will replace the engine fuel rail pulse damper retainer clip.
On certain vehicles equipped with Workhorse Custom Chassis, an incorrect steering intermediate shaft may have been installed. The incorrect part has a finer pitch spline. Use of the incorrect part may cause the spline not to match correctly with the steering gear input shaft. This could cause the spline to strip if the steering wheel is turned with a significant amount of force. This failure is likely only to occur when the vehicle is stopped or during tight turning manoeuvres at very low speeds. This condition may result in a loss of steering control. Correction: Dealers will replace the shaft.