Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2008 BMW R1200 GS Adventure, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
BMW of North America, LLC (BMW) is recalling certain 2009-2011 K1300 (S, GT), 2010-2011 S1000 RR, 2005-2011 R1200 (GS, GS Adventure, R, RT, S, ST), 2006-2010 HP2 (Enduro, Megamoto, Sport), 2005-2008 K1200 (R, R Sport, S, GT), and 2012 K1600 (GT, GTL) motorcycles that were repaired under recall 13V-617 with the support ring remedy and where the fuel pump was not replaced at a later date. This recall involves the fuel pump, and also the auxiliary fuel pump as applicable. The affected motorcycles have a fuel pump flange that may crack, possibly resulting in a fuel leak while the engine is running. Remedy: BMW will notify owners, and dealers will replace the fuel pump(s) with an improved version, free of charge. The recall began January 18, 2021. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain accessory turn signals manufactured for 2006-2017 R1200GS, 2007-2008 and 2010-2017 R1200GS Adventure, 2017 F700GS and F800GS, 2013-2017 F800GT, 2015-2016 F800R, 2014-2017 F800GS Adventure, 2014-2016 S1000R, 2015-2017 R1200R, 2016-2017 R1200RS, and 2010-2017 S1000RR motorcycles. As designed, these accessory turn signals may be insufficiently visible to other drivers, and, as such, fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment." Remedy: BMW will notify owners, and dealers will replace the turn signals, free of charge. The recall began October 25, 2017. Owners may contact BMW customer service at 1-800-525-7417.
BMW IS RECALLING 4,922 MY 2007-2008 R1200R, MY 2006-2007 R1200 GS, MY 2007 R1200 ST, AND MY 2008 R1200 GS ADVENTURE MOTORCYCLES. DUE TO THE CURRENT ROUTING OF THE FRONT BRAKE LINES, IT IS POSSIBLE THAT DURING RIDING, THE BRAKE LINES COULD BE UNDER STRAIN. IF THE VIBRATION/STRAIN IS SIGNIFICANT, THE BRAKE LINES COULD SPLIT AND START TO DEVELOP A LEAK. IF THE LEAK BECAME SIGNIFICANT, BRAKE FLUID COULD ESCAPE. IF THIS HAPPENED, THE LEVEL OF FLUID IN THE RESERVOIR OF THE FRONT BRAKE SYSTEM COULD DROP. Remedy: DEALERS WILL INSPECT AND INSTALL NEW BRAKE LINES WITH A MODIFIED ROUTING FREE OF CHARGE. THE RECALL BEGAN DURING AUGUST 2008. OWNERS MAY CONTACT BMW AT 1-800-831-1117.
BMW IS RECALLING 46 MY 2008 R1200 R, R1200 GS, AND R1200 GS ADVENTURE MOTORCYCLES. DUE TO A MATERIAL DEFECT IN THE INTERMEDIATE SHAFT OF THE TRANSMISSION, THE SHAFT COULD BREAK. IF THIS OCCURRED, IT IS POSSIBLE FOR THE TRANSMISSION TO SEIZE. Remedy: DEALERS WILL REPLACE THE GEARBOX. THE RECALL BEGAN DURING AUGUST 2008. OWNERS SHOULD CONTACT BMW AT 1-800-331-1117.
BMW IS RECALLING MODEL YEAR 2008 R1200 GS AND R1200 GS ADVENTURE MOTORCYCLES. IN CERTAIN SITUATIONS, SUCH AS HIGH GENERATOR SPEEDS COMBINED WITH LARGE DEMANDS FOR ELECTRICAL CURRENT, SPURIOUS SIGNALS COULD EMERGE WITHIN THE MOTORCYCLE'S ELECTRICAL SYSTEM. IF THIS WERE TO OCCUR, IT COULD AFFECT THE PRESSURE SENSOR SIGNALS OF THE ANTI-LOCK BRAKE SYSTEM (ABS) CONTROL UNIT. IF THIS HAPPENED, THE ABS COULD SWITCH OFF; HOWEVER, IN SUCH A SITUATION, A WARNING LAMP WOULD ILLUMINATE. NORMAL BRAKING WOULD STILL BE AVAILABLE TO SLOW AND STOP THE MOTORCYCLE. Remedy: DEALERS WILL INSPECT AND REPAIR OR REPLACE THE NECESSARY COMPONENTS FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 26, 2009. OWNERS MAY CONTACT BMW AT 1-800-831-1117.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Certain motorcycles with dealer installed accessory turn signals may not comply with the requirements of Canada Motor Vehicle Safety Standard (CVMSS) 108 - Lighting System and Retroreflective Devices. The size of the lens on the accessory turn signals may be too small, and therefore would not meet the requirements of the standard. This could reduce vehicle conspicuity to following and approaching road users, and increase the risk of a crash causing injury and/or property damage. Correction: Dealers will replace the accessory turn signals with factory indicators that meet the requirements of the standard.
On certain motorcycles, the threaded holes on the rear wheel flange could crack if the wheel bolts are tightened beyond the specified torque limit during servicing. Over time, this could allow the bolts to back out of their threaded holes, causing the rear wheel to become loose. This could result in a loss of stability of the motorcycle, and increase the risk of a crash causing injury and/or property damage. Correction: Dealers will replace the aluminum rear wheel flange with a steel flange.
On certain motorcycles, cracks could develop in the fuel pump and/or auxiliary fuel pump flange (if equipped). This would result in fuel leaking when the engine is turned on and the fuel system is pressurized. Leaking fuel, in the presence of an ignition source, could lead to a fire causing injury and/or damage to property. Correction: Dealers will inspect the fuel pump flange(s) and install a reinforcing ring or replace the fuel pump(s), as necessary.
On certain motorcycles, the front brake lines (due to its current routing) may be under strain. The vibrations that occur when the motorcycle is being ridden could cause the brake lines to develop leaks, allowing brake fluid to escape and cause the level of fluid in the reservoir of the front brake system to drop. Brake fluid leakage could result in loss of front braking capability, which could lead to a crash causing property damage, personal injury or death. Correction: Dealers will replace the front brake lines.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
On certain motorcycles, high generator speeds combined with large demands for electrical current could cause spurious signals to emerge within the electrical system. This could affect the pressure sensor signals of the Anti-lock Brake System (ABS) control unit, which in turn could cause the ABS to switch off. The telltale light in the instrument panel would illuminate to notify that the ABS function is not available. Correction: Dealers will install a capacitor meant to block interfering electrical signals.
On certain motorcycles, vibrations that occur when underway could cause the front brake lines to suffer damage and develop a leak. Brake fluid leakage could ultimately result in loss of front braking capability which, depending on traffic conditions and the rider's reactions, could result in a crash causing personal injury or death. Correction: Dealers will replace the front brake lines.