Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2008 Jeep Grand Cherokee, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Chrysler Group LLC (Chrysler) is recalling certain model year 2008 Chrysler 300 vehicles manufactured May 31, 2007, to May 12, 2008, Dodge Magnum vehicles manufactured May 23, 2007, to May 12, 2008, Dodge Charger vehicles manufactured May 24, 2007, to May 12, 2008, Jeep Commander vehicles manufactured April 3, 2007, to May 12, 2008, and Jeep Grand Cherokee vehicles manufactured March 21, 2007, to May 12, 2008. In the affected vehicles, the ignition key (FOBIK) may not return to the "ON" position after being rotated to the "START" position, instead sticking between the two positions. Potentially, while the vehicle is being driven, the ignition may inadvertently move through the "RUN" position to the "ACCESSORY" or "OFF" ignition position, turning off the engine. Remedy: Chrysler will notify owners, and dealers will replace the ignition switch and key FOBs, free of charge. The recall began August 19, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P57.
Chrysler Group LLC (Chrysler) is recalling certain model year 2005-2010 Jeep Grand Cherokee vehicles manufactured February 11, 2004, through March 9, 2010; and 2006-2010 Jeep Commander vehicles manufactured January 31, 2005, through March 10, 2010. A transfer case electrical failure may result in an unintentional shifting of the transfer case into the neutral position. Remedy: Chrysler will notify owners, and dealers will reflash the final drive controller which governs the transfer case, with new software, free of charge. The recall began on August 15, 2013. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N23.
CHRYSLER IS RECALLING 1,338 MY 2008 JEEP GRAND CHEROKEE AND COMMANDER VEHICLES. THE FRONT CONTROL MODULE MAY HAVE BEEN INCORRECTLY MANUFACTURED. Remedy: DEALERS WILL INSPECT THE MODULE AND REPLACE IT IF NECESSARY. THE RECALL BEGAN ON FEBRUARY 18, 2008. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
ROCK KRAWLER IS RECALLING 44 PERFORMANCE SUSPENSION SYSTEMS SOLD AS AFTERMARKET EQUIPMENT FOR USE ON THE VEHICLE LISTED ABOVE. THESE SUSPENSION SYSTEMS WERE PRODUCED WITH GRADE 2 CARRIAGE BOLTS INSTEAD OF THE PROPER GRADE 5 CARRIAGE BOLTS. THE IMPROPER GRADE 2 CARRIAGE BOLTS COULD EXPERIENCE A LOSS OF CLAMPING FORCE FOR THE BOTTOM STRUT FORK. Remedy: ROCK KRAWLER WILL NOTIFY OWNERS AND PROVIDE A FREE REMEDY. THE SAFETY RECALL BEGAN ON OCTOBER 15. 2008. ALL THE AFFECTED UNTITS HAVE BEEN REMEDIED. OWNERS MAY CONTACT ROCK KRAWLER AT 1-518-270-9822.
ON CERTAIN SPORT UTILITY VEHICLES, FRONT BRAKE CALIPERS IN A CERTAIN LOT MAY HAVE BEEN MANUFACTURED FROM GRAY IRON INSTEAD OF DUCTILE IRON AS DESIGNED AND COULD FRACTURE WITHOUT WARNING. Remedy: DEALERS WILL INSPECT THE FRONT BRAKE CALIPERS TO SEE IF THEY FALL INTO THIS LOT AND, IF SO, WILL REPLACE THEM FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 22, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain vehicles, the ignition key may not fully return to the RUN position from the START position once the key is released after starting the vehicle. This could affect various vehicle electrical functions, and also cause an unintended change in ignition switch position, which could cause the engine to stall. This would result in a loss of motive power and affect functioning of the power steering and power braking assist systems as well as other safety systems including airbags. These issues could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the Wireless Ignition Node (WIN) module (i.e. ignition switch) and FOBIKs (keys).
On certain vehicles equipped with a full-time four-wheel drive system, the transfer case controller could fail. This could cause the transfer case to shift into or through the neutral position, which may allow the vehicle to roll away, even with the transmission in the PARK position. Should the vehicle roll away, it could strike another vehicle, stationary object, or a bystander, causing property damage and/or personal injury. Correction: Dealers will reprogram the final drive controller with updated software.
On certain vehicles, the front control module may have been manufactured incorrectly. This could cause the engine to stall while driving, or not to start, and/or cause the windshield wipers to become inoperative. Engine stalling would result in lost propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash. Correction: Dealers will inspect the front control module and replace it if necessary.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, the front brake calipers were improperly manufactured and could break under certain operating conditions. This could increase the vehicle's stopping distance and cause a crash with injury or death. Correction: Dealers will inspect and, if required, replace the front brake calipers.