Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2008 Sterling Acterra, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
DAIMLER TRUCKS NORTH AMERICA IS RECALLING CERTAIN MODEL YEAR 2005 THROUGH 2012 FREIGHTLINER M2, STERLING ACTERRA, 7500 & 8500, AND THOMAS BUILT HDX VEHICLES MANUFACTURED FROM JUNE 23, 2004, THROUGH MARCH 15, 2011, EQUIPPED WITH SPECIFIC MBE900 EPA04 AND EPA07 MODEL ENGINES. THE INTAKE AIR GRID HEATER MAY SHORT CIRCUIT AND FAIL DUE TO EXCESSIVE INTERNAL TEMPERATURES. Remedy: DAIMLER TRUCKS WILL NOTIFY OWNERS, AND DEALERS WILL REPAIR THE VEHICLES FREE OF CHARGE. REPAIRS WILL BE PERFORMED BY DETROIT DIESEL CORPORATION AUTHORIZED REPAIR FACILITIES. THE SAFETY RECALL BEGAN ON SEPTEMBER 12, 2011. OWNERS MAY CONTACT DAIMLER TRUCKS TOLL-FREE AT 1-800-547-0712. THIS RECALL IS AN EXPANSION OF A PREVIOUS RECALL, CAMPAIGN NUMBER 10V-341.
DAIMLER TRUCKS IS RECALLING 28,764 MY 2001 THROUGH 2008 FCCC B2 AND FS65 SCHOOL BUS CHASSIS, FCCC FB65 CONVENTIONAL BUSES, AND STERLING ACTERRA, FREIGHTLINER FLN, AND BUSINESS CLASS M2 HEAVY TRUCKS, BUILT FROM JANUARY 26, 2000, THROUGH MARCH 24, 2008, MANUFACTURED WITH ARVINMERITOR OR AXLE ALLIANCE COMPANY 6,000 THROUGH 8,000 POUND FRONT AXLES UTILIZING A FOUR PIECE SPINDLE-NUT SET. THESE AXLE ASSEMBLIES MAY HAVE BEEN PRODUCED WITH A THIN SPINDLE NUT WHICH MAY LEAD TO INCORRECT END PLAY, CONE SPIN, EXCESSIVE HEAT, DEGRADATION OF LUBRICATION, WEAR OF THE SPINDLE NUT AND BEARING JOURNAL, OIL CONTAMINATION WITH METAL SHAVINGS, AND PREMATURE BEARING FAILURE. Remedy: DAIMLER TRUCKS WILL NOTIFY OWNERS AND WILL REPAIR THE VEHICLES FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 8, 2009. OWNERS MAY CONTACT DAIMLER TRUCKS AT 1-800-547-0712.
DAIMLER TRUCKS IS RECALLING 900 MY 2008 FREIGHTLINER ARGOSY, ARGOSY RHD, CASCADIA, COLUMBIA, CENTURY ST, CORONADO, STERLING ACTERRA, L-LINE AND WESTERN STAR 4900 TRUCKS EQUIPPED WITH BENDIX MV-3 DASH CONTROL VALVES. THE MOLDED VALVE BODY HAS AN INCORRECT CORE PIN IN THE INJECTION MOLD CAUSING THE VALVE BODY TO BE OVERSIZED IN THE DOUBLE CHECK VALVE AREA. THIS CONDITION CAN ALLOW THE RUBBER DOUBLE CHECK VALVE TO BECOME LODGED IN THE BODY OPENING UNDER CERTAIN CIRCUMSTANCES. Remedy: DEALERS WILL INSPECT THE MV-3 DASH VALVE FOR THE PRODUCTION DATE CODE. VALVES IN THE AFFECTED PRODUCTION LOTS WILL BE REPLACED FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 9, 2008. OWNERS MAY CONTACT DAIMLER TRUCKS AT 1-800-547-0712.
ON CERTAIN TRUCK-TRACTORS EQUIPPED WITH HOLLAND SIMPLEX SE OR SE II FIFTH WHEELS, THE LATCH LEVER PIVOT BOLT ASSEMBLY MAY HAVE BEEN OVER-TIGHTENED WHICH COULD DISTORT THE PIVOT BOLT SPACER SLEEVE. CORROSION OR CONTAMINATES IN THE PIVOT MAY CAUSE IT TO BIND AND PREVENT THE FIFTH WHEEL JAW FROM LATCHING SECURELY AROUND THE TRAILER KING PIN. Remedy: DEALERS WILL REPLACE THE PIVOT BOLT AND SLEEVE WITH A HEX HEAD SHOULDER BOLT AND WASHER. THE RECALL BEGAN ON JANUARY 3, 2008. OWNERS MAY CONTACT FREIGHTLINER AT 1-800-547-0712.
CERTAIN FREIGHTLINER SCHOOL BUS CHASSIS, HEAVY TRUCKS, AND THOMAS BUILT SCHOOL BUSES MANUFACTURED BETWEEN JULY 2002 AND JULY 3, 2007, EQUIPPED WITH BENDIX SR-7 SPRING BRAKE CONTROL VALVES. THE PARKER SCV BRASS 90 DEGREE SINGLE CHECK VALVES (SCV) WHICH ATTACH TO THE SUPPLY PORT OF A BENDIX SR-7 SPRING BRAKE MODULATING VALVE CAN BREAK APART. PIECES OF THE PARKER SCV CAN BECOME LODGED INSIDE THE SR-7 SPRING BRAKE MODULATING VALVE, POTENTIALLY CAUSING EITHER LEAKAGE OUT OF THE SR-7 VALVE OR PREVENTING AIR FROM PROPERLY EXHAUSTING FROM THE SR-7 VALVE. ALSO, DUE TO A MANUFACTURING DEFECT IN THE INTERNAL RUBBER CHECK VALVE INSIDE THE SR-7 SPRING BRAKE MODULATING VALVES, THE VALVES CAN BECOME DEFORMED AND NOT SEAT PROPERLY. Remedy: FREIGHTLINER WILL NOTIFY OWNERS AND REPAIR THE VEHICLES FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 11, 2008 TO FREIGHTLINER, STERLING, AND FREIGHTLINER CUSTOM CHASSIS OWNERS; TO THOMAS BUILT BUS OWNERS ON FEBRUARY 1, 2008. OWNERS CAN CONTACT FREIGHTLINER AT 1-800-547-0712.
ON CERTAIN TRUCKS EQUIPPED WITH TUFTRAC REAR SUSPENSIONS, THE CENTER CASTING BRACKETS MAY BE OUT OF SPECIFICATION. AN OUT OF SQUARE CASTING MAY HAVE UNACCEPTABLE STRESS IN THE BRACKET WHEN IT IS INSTALLED AND MAY CAUSE IT TO CRACK IN SERVICE. Remedy: DEALERS WILL INSPECT AND CASTINGS THAT ARE OUT OF SPECIFICATION WILL BE REPLACED FREE OF CHARGE. THE RECALL BEGAN ON DECEMBER 12, 2007. OWNERS MAY CONTACT FREIGHTLINER AT 1-800-547-0712.
ON CERTAIN TRUCKS BUILT WITH AXILOK REAR WHEEL SPINDLE NUTS, THE NUTS MAY HAVE BEEN IMPROPERLY INSTALLED, WITH ONE OR BOTH LOCKING CLIP TABS NOT PROPERLY ENGAGED OR DAMAGED. Remedy: DEALERS WILL INSPECT THE AXILOK NUTS FOR LOCKING CLIP ENGAGEMENT OR DAMAGE. THEY WILL BE ADJUSTED OR REPLACED FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 10, 2007. OWNERS MAY CONTACT FREIGHTLINER AT 800-547-0712.
FREIGHTLINER IS RECALLING CERTAIN SCHOOL BUS CHASSIS, HEAVY TRUCKS, VAN CHASSIS, RV MOTORHOME CHASSIS MANUFACTURED FROM JANUARY 5 TO MAY 17, 2007, EQUIPPED WITH AXLE ALLIANCE COMPANY (AAC) FRONT AXLES. DURING THE FRONT AXLE ASSEMBLY, THE FASTENERS THAT ATTACH THE STEERING ARM OR TIE ROD ARMS TO THE SPINDLE MAY BE OVER OR UNDER TIGHTENED. Remedy: THOMAS BUILT WILL NOTIFY OWNERS, INSPECT THE FASTENERS, AND REPLACE THE STEERING ARM IF NECESSARY. THE RECALL BEGAN ON DECEMBER 21, 2007. OWNERS CAN CONTACT FREIGHTLINER AT 1-800-547-0712.
DAIMLER TRUCKS IS RECALLING CERTAIN MODEL YEAR 2008 AND 2009 FREIGHTLINER BUSINESS CLASS M2 AND STERLING ACTERRA EMERGENCY VEHICLES MANUFACTURED FROM AUGUST 18, 2006, THROUGH JULY 7, 2010, EQUIPPED WITH EPA 2007 MBE 900 DETROIT DIESEL ENGINES. ENGINE SOFTWARE MAY NOT REACT PROPERLY TO CERTAIN AFTERMARKET TREATMENT DEVICE FAULT CODES. THE SOFTWARE MAY UNNECESSARILY SHUTDOWN A VEHICLE OR MAY FAIL TO SHUTDOWN A VEHICLE WITH AN AFTERMARKET DEVICE OVER-TEMP FAULT. Remedy: DAIMLER TRUCKS WILL NOTIFY OWNERS AND REPAIRS WILL BE PERFORMED BY DETROIT DIESEL FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 25, 2011. OWNERS MAY CONTACT DAIMLER TRUCKS AT 1-800-547-0712. THIS SAFETY RECALL CAMPAIGN IS AN EXPANSION OF A PREVIOUS RECALL (PLEASE SEE 10V-472).
CUES, INC. IS RECALLING CERTAIN MODEL YEAR 2007-2009 SERVICE VEHICLES BUILT ON VARIOUS CHASSIS EQUIPPED WITH CARRIER AIRV CEILING UNITS, MODEL NOS. 68RV0010BA, 68RV0012CA, AND 68RV0010EA. THE HEATER ELEMENT IN THESE ASSEMBLIES MAY BE DEFECTIVE WHICH COULD CAUSE THE UNIT TO CREATE SMOKE OR SPARKS. Remedy: CUES IS WORKING WITH CARRIER TO REMEDY THE AFFECTED VEHICLES. REPAIRS WILL BE MADE BY CARRIER FREE OF CHARGE. PLEASE SEE CARRIER'S DEFECT REPORT 09E-053. THE SAFETY RECALL BEGAN ON JANUARY 5, 2010. OWNERS MAY CONTACT CARRIER AT 1-877-584-7059 OR CUES AT 1-407-849-0190.
DAIMLER TRUCKS IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2010 FREIGHTLINER M2, CUSTOM CHASSIS MT55, AND STERLING ACTERRA VEHICLES MANUFACTURED BETWEEN APRIL 4, 2007 AND JULY 15, 2009, EQUIPPED WITH CUMMINS ISC CM2150 AND ISL CM2150 MODEL DIESEL ENGINES. THE VEHICLES MAY BE DESIGNED WITH A HARD WIRED, DASH-MOUNTED SWITCH THAT ENABLES THE VEHICLE OPERATOR TO INHIBIT AFTERTREATMENT DIESEL PARTICULATE FILTER REGENERATION IN ENVIRONMENTS WHERE THE OPERATOR BELIEVES IT MAY BE UNSAFE FOR ELEVATED EXHAUST TEMPERATURES. DUE TO AN ISSUE WITH THE LOGIC IN THE ECM SOFTWARE IN THESE ENGINES, THE SWITCH MAY NOT FUNCTION CORRECTLY, LEADING THE OPERATOR TO BELIEVE THAT THE SWITCH IS IN "INHIBIT" MODE WHEN IT IS NOT. Remedy: DAIMLER TRUCKS IS WORKING WITH CUMMINS TO REPAIR THE ENGINES FREE OF CHARGE. PLEASE SEE CUMMINS' DEFECT REPORT 09E-046. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING NOVEMBER 2009. OWNERS MAY CONTACT CUMMINS AT 1-800-DIESELS (1-800-343-7357) OR DAIMLER TRUCKS AT 1-800-547-0712.
DAIMLER TRUCKS IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2011 FREIGHTLINER, FCCC, STERLING, AND WESTERN STAR HEAVY TRUCKS MANUFACTURED FROM SEPTEMBER 5, 2006, THROUGH JUNE 30, 2010, EQUIPPED WITH SPECIFIC MBE900 EPA04 AND EPA07 MODEL ENGINES. THE INTAKE AIR GRID HEATER MAY SHORT CIRCUIT AND FAIL DUE TO EXCESSIVE INTERNAL TEMPERATURES. Remedy: DAIMLER TRUCKS WILL NOTIFY OWNERS AND DEALERS WILL REPAIR THE BUSES FREE OF CHARGE. REPAIRS WILL BE PERFORMED BY DETROIT DIESEL CORPORATION AUTHORIZED REPAIR FACILITIES. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR ABOUT JULY 29, 2011. OWNERS MAY CONTACT DAIMLER TRUCKS TOLL-FREE AT 1-800-547-0712.
DAIMLER TRUCKS IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2010 FREIGHTLINER BUSINESS CLASS M2, CUSTOM CHASSIS MT45, S2 CHASSIS, AND STERING ACTERRA VEHICLES MANUFACTURED FROM OCTOBER 5, 2006, THROUGH MAY 24, 2010, EQUIPPED WITH EPA 2007 MBE 900 DETROIT DIESEL ENGINES. ENGINE SOFTWARE MAY NOT REACT PROPERLY TO CERTAIN AFTERMARKET TREATMENT DEVICE FAULT CODES. THE SOFTWARE MAY UNNECESSARILY SHUTDOWN A VEHICLE OR MAY FAIL TO SHUTDOWN A VEHICLE WITH AN AFTERMARKET DEVICE OVER-TEMP FAULT. Remedy: DAIMLER TRUCKS WILL NOTIFY OWNERS AND REPAIRS WILL BE PERFORMED BY DETROIT DIESEL FREE OF CHARGE. THE SAFETY RECALL BEGAN ON DECEMBER 30, 2010. OWNERS MAY CONTACT DAIMLER TRUCKS AT 1-800-547-0712.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: Certain trucks were built with air reservoir tanks that are too small in relation to the size of the air brake chambers. Canadian regulations require enough air reservoir capacity to ensure the brakes work even with heavy use or when there is a partial loss of the air system. Safety Risk: Reduced braking could cause extended stopping distances and increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their truck to a Daimler Trucks North America authorized service facility to modify the truck to ensure it meets Canadian regulations.
On certain vehicles equipped with an MBE900 (EPA04 and EPA07) engine, the intake air grid heater may short circuit and fail. This could result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will install an additional external relay to prevent battery connection to the grid heater when the vehicle is not running and when grid heater control signal is absent.
Certain vehicles may have been assembled with an incorrectly manufactured Bendix MV-3 dash control valve. If the double check valve becomes lodged, in the event of a primary reservoir failure, air pressure can leak past the lodged valve, thereby depleting the secondary reservoir, causing a reduced ability for modulating the emergency brakes. Extended stopping distances may result in a vehicle crash, causing property damage, and/or personal injury or death. Correction: Dealers will inspect and, if necessary, replace the dash control valve.
On certain vehicles, incorrect spindle nuts may have been installed during vehicle assembly. This could cause incorrect end play, cone spin, excessive heat, degradation of lubrication, wear of the spindle nut and bearing journal, oil contamination with metal shavings, and premature bearing failure. Continued operation could lead to wheel separation, which could result in a vehicle crash. As well, this situation creates the risk that nearby bystanders or motorists be struck by a wayward wheel assembly. Either of these concerns could cause property damage, personal injury, or death. Correction: Dealers will affect repairs.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
On certain trucks, the fifth wheel hitch assembly's lever arm may have been incorrectly installed during the manufacturing process. The lever arm pivot bolt may have been over-tightened which could distort the pivot bolt spacer sleeve and prevent the fifth wheel latch jaw from closing and latching securely around the trailer king pin. This could allow the towed unit to separate from the towing vehicle while underway, potentially causing a crash with injury or death. Correction: Dealers will replace the pivot bolt and sleeve with a hex head shoulder bolt and washer.
On certain vehicles, the fasteners that attach the steering arm or tie rod arm to the spindle may have been over or under tightened during assembly process. Incorrectly torqued steering arm fasteners may fatigue and fracture, possibly causing a crash without warning. Correction: Dealers will inspect fasteners and apply correct tightening torque.
On certain trucks, the flange, crossmember, and web mounting surfaces of the center suspension mounting bracket casting may not be perpendicular. An out of square casting may have unacceptable stresses in the bracket when it is installed and may cause it to crack in service. The driveline may not be held in position if a cracked bracket fractures completely. This will affect vehicle control and may cause a crash without warning. Correction: Dealers will replace casting out of specs.
On certain vehicles, the internal rubber check valve inside the Bendix SR-7 spring brake modulating valve can become deformed over time. The effect of this defect is intermittent and presents a potential delay or failure in applying the parking brakes; potentially resulting in a vehicle roll away. Should this occur, the unattended roll away vehicle could strike a bystander or cause property damage. Correction: Dealers will install a check valve repair kit.