Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2008 Sterling Bullet, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Daimler Trucks North America LLC (DTNA) is recalling certain model year 2008-2009 Sterling Bullet 4500 and 5500 cab chassis vehicles manufactured November 1, 2007, to November 7, 2008. The affected vehicles have a 220 amp alternator that may develop a short circuit. Remedy: DTNA will notify owners, and DTNA dealers will replace the alternator, free of charge. The recall began on February 1, 2017. Owners may contact DTNA customer service at 1-800-745-8000. DTNA's number for this recall is FL-729.
Daimler Trucks North America LLC (DTNA) is recalling certain model year 2008-2009 Sterling Bullet 4500 and 5500 trucks manufactured October 15, 2007, to November 10, 2008. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture. Remedy: DTNA will notify owners, and dealers will replace the driver's frontal air bag, free of charge. The recall began on October 6, 2015. Owners may contact DTNA customer service at 1-800-745-8000. DTNA's number for this recall is FL-684.
DAIMLER TRUCKS IS RECALLING CERTAIN MODEL YEAR 2008 AND 2009 STERLING BULLET VEHICLES MANUFACTURED FROM OCTOBER 15, 2007, THROUGH NOVEMBER 10, 2008. THE LEFT OUTER TIE ROD END MAY FRACTURE DUE TO A MISALIGNMENT CONDITION. UNDER CERTAIN DRIVING CONDITIONS, THE MISALIGNMENT MAY LEAD TO A WEAKENING AND EVENTUAL FRACTURE OF THE LEFT OUTER TIE ROD BALL STUD. Remedy: DAIMLER TRUCKS WILL NOTIFY OWNERS WITH A TWO PART LETTER REGARDING THIS RECALL CAMPAIGN AND TO INFORM OWNERS THAT THE LEFT OUTER TIE ROD END WILL BE REPLACED WHEN REPLACEMENT PARTS ARE AVAILABLE. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 26, 2011. OWNERS MAY CONTACT DAIMLER TRUCKS AT 1-800-547-0712.
DAIMLER TRUCKS IS RECALLING 46 MY 2008 STERLING BULLET TRUCKS EQUIPPED WITH DASH SILENCER PAD THAT COULD SAG AND COME IN CONTACT WITH AN EXHAUST GAS RECIRCULATION (EGR) COOLER IN THE ENGINE COMPARTMENT. Remedy: DEALERS WILL ADD A BRACKET TO SUPPORT THE ENGINE COMPARTMENT SILENCER PAD ADJACENT TO THE EGR COOLER. THE RECALL IS EXPECTED TO BEGIN DURING MAY 2009. OWNERS MAY CONTACT DAIMLER TRUCKS AT 1-800-547-0712.
Daimler Trucks North America (DTNA) is recalling certain model year 2008-2009 Sterling Bullet trucks manufactured October 15, 2007, through November 10, 2008. In the affected vehicles, the left outer tie rod ball stud may fracture. Remedy: DTNA will notify owners, and dealers will replace the tie rod assembly with a redesigned assembly, free of charge. The recall began on July 24, 2015. Customers may contact DTNA at 1-800-547-0712. DTNA's number for this recall is FL-655.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain vehicles equipped with a 220 amp alternator, frequent load cycling at the rated amperage capacity and particularly in hot ambient conditions could cause the alternator to develop a short, increasing the risk of an engine compartment fire. A fire could increase the risk of injury and/or damage to property. Correction: Dealers will replace the alternator.
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect/replace the driver’s frontal airbag inflator.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, the left outer tie rod ball stud could fracture, potentially resulting in a loss of vehicle control and a crash causing injury and/or property damage. Correction: Dealers will install a redesigned left outer tie rod assembly. Note: This recall supersedes recall 2011-011 (FL-588). Vehicles that were repaired under the previous campaign will also need to be repaired under this campaign.
Certain vehicles may experience a weakening and fracture of the ball stud on the left outer tie rod assembly. A loss of steering control could result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the left outer tie rod assembly.
On certain vehicles equipped with a 6.7L diesel engine, a silencer pad may sag and contact the exhaust gas recirculation cooler, which could result in an engine compartment fire. Correction: Dealers will install a bracket to support the silencer pad.