Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2008 Suzuki GSX-R750, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Suzuki Motor of America, Inc. (Suzuki) is recalling certain model year 2008-2012 AN400, AN400A, DL1000, GSX1300R, 2008-2009 GSF1250S and GSF1250SA, 2008 GSX1300BK and GSX1300BKA, 2008-2010 GSX650F, GSX-R600, GSX-R750, VLR1800, VLR1800T, and 2009-2010 SFV650 and VZ1500 motorcycles. Due to a problem with the circuit board for the regulator/rectifier power module, the motorcycle may not sufficiently charge the battery and the motorcycle may stall. Remedy: Suzuki will notify owners, and dealers will replace the regulator/rectifier, free of charge. The recall is expected to begin March 4, 2016. Owners may contact Suzuki customer service at 1-800-444-5077. Suzuki's number for this recall is 2A56 to 2A64.
Suzuki Motor of America, Inc. (Suzuki) is recalling certain model year 2004-2013 GSX-R600 and GSX-R750, and model year 2005-2013 GSX-R1000 motorcycles. In combination with older brake fluid, corrosion of the brake piston inside of the front brake master cylinder generates gas that may result in a reduction of fluid pressure transmission to the front brake. Remedy: Suzuki will notify owners, and dealers will replace the front brake master cylinder, free of charge. The recall began on November 18, 2013. Owners may contact Suzuki at 1-800-572-1490. Suzuki's campaign numbers for this recall are: 2A (31, 32, 33, 34, 35, and 36).
SUZUKI IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2010 MOTORCYCLES MANUFACTURED FROM JULY 2007 THROUGH SEPTEMBER 2009, EQUIPPED WITH REGULATOR/RECTIFIER ASSEMBLIES, SUZUKI PART NUMBERS 32800-41F11, 32800-15H10, 32800-05H11, 32800-41G10, 32800-15H00, 32800-18H00, 32800-05G10, 32800-10G10, 32800-05H20, OR 32800-06G01. SOME REGULATOR/RECTIFIER ASSEMBLIES WERE PRODUCED WITH INSUFFICIENT ADHESION BETWEEN THE POWER MODULE (CIRCUIT BOARD) AND THE RECTIFIER CASE THAT CONTAINS A HEAT SINK TO DISSIPATE HEAT. DUE TO INSUFFICIENT ADHESION, HEAT GENERATED ON THE POWER MODULE CIRCUIT BOARD CAN CAUSE THE CIRCUIT BOARD TO DEFORM, AND LIFT OF THE CASE. Remedy: SUZUKI WILL NOTIFY OWNERS AND SUZUKI DISTRIBUTORS WILL REPLACE THE REGULATOR/RECTIFIER WITH AN IMPROVED PART FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 2, 2011. OWNERS MAY CONTACT SUZUKI AT 1-714-572-1490.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain motorcycles, the regulator/rectifier assembly may have been produced with insufficient adhesion between the power module (circuit board) and the rectifier case. Due to this insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform. This could cause excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the vehicle's battery. Battery discharge could lead to engine stalling and/or a no-start condition. Lost propulsion, in conjunction with traffic and road conditions, and the rider's reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the regulator/rectifier assembly. Note: This recall may supersede recall 2011-071 for certain model motorcycles, which will require re-inspection and repair.
On certain motorcycles, corrosion could form inside the front brake master cylinder, which could cause a spongy brake feel. This could potentially lead to extended stopping distances, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will install a redesigned front brake master cylinder.
On certain motorcycles, the regulator/rectifier assembly may have been produced with insufficient adhesion between the power module (circuit board) and the rectifier case. Due to this insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform. This could cause excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the vehicle's battery. Battery discharge could lead to engine stalling and/or a no-start condition. Lost propulsion, in conjunction with traffic and road conditions, and the rider's reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the regulator/rectifier assembly. Note: This recall may be superseded by recall 2016-022 for certain models. Please see recall 2016022 for more information: <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2016022">Click here for more information</a>
We checked the EU Safety Gate for recall alerts naming this model and its production years.
Source: EU Safety Gate (European Commission) · CC BY 4.0, © European Union
Production: The motorcycles concerned were built between 2007 and 2012.. Types: Types: WVCG, WVCJ, WVCZ, WVCH, WVB9, WVCR, WVCK, WVCV, WVCW, WVCX, WVCT, WVCU, WVBS.; type-approval numbers: e4*2002/24*1052, e4*2002/24*1342, e4*2002/24*2163, e4*2002/24*1300, e4*2002/24*0721, e4*2002/24*1351, e4*2002/24*1618, e4*2002/24*1756, e4*2002/24*1852, e4*2002/24*2102, e1......
Production dates not stated in the alert. Types: FL6.
Production dates not stated in the alert. Types: GSX-R750/Z L1-L4, GSX-R1000/Z K9-L4.
Production: The recall concerns motorcycles produced from 03/12/2003 to 20/06/2013.. Types: GSX-R600 (K4/K5/K6/K7/K8/K9/L0/L1/L2/L3) GSX-R750 (K4/K5/K6/K7/K8/K9/L0/L1/L2/L3) GSX-R1000 (K5/K6/K7/K8/K9/L0/L1/L2/L3).
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain