Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2008 Suzuki GSX1300R, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Suzuki Motor of America, Inc. (Suzuki) is recalling certain model year 2008-2012 AN400, AN400A, DL1000, GSX1300R, 2008-2009 GSF1250S and GSF1250SA, 2008 GSX1300BK and GSX1300BKA, 2008-2010 GSX650F, GSX-R600, GSX-R750, VLR1800, VLR1800T, and 2009-2010 SFV650 and VZ1500 motorcycles. Due to a problem with the circuit board for the regulator/rectifier power module, the motorcycle may not sufficiently charge the battery and the motorcycle may stall. Remedy: Suzuki will notify owners, and dealers will replace the regulator/rectifier, free of charge. The recall is expected to begin March 4, 2016. Owners may contact Suzuki customer service at 1-800-444-5077. Suzuki's number for this recall is 2A56 to 2A64.
Ohlins Racing AB (Ohlins) is recalling certain steering dampers kits manufactured with an incorrectly machined bracket. These dampers were sold for use as aftermarket equipment on Yamaha R1, R6, and FZ6, Suzuki TL1000 R and GSX1300R, Honda CB600RR, and Ducati Monster 1000, 748, 848, 916, 996, and 998 motorcycles. Also included are universal steering damper kits with part numbers SD 000 through SD 005. The affected brackets may crack. Remedy: Ohlins will notify the distributors and provide their customers with a new bracket. The recall began in November 2013. Owners may contact Ohlins USA at 1-828-692-4525. Note: This recall is an expansion of recall 13E-034.
SUZUKI IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2010 MOTORCYCLES MANUFACTURED FROM JULY 2007 THROUGH SEPTEMBER 2009, EQUIPPED WITH REGULATOR/RECTIFIER ASSEMBLIES, SUZUKI PART NUMBERS 32800-41F11, 32800-15H10, 32800-05H11, 32800-41G10, 32800-15H00, 32800-18H00, 32800-05G10, 32800-10G10, 32800-05H20, OR 32800-06G01. SOME REGULATOR/RECTIFIER ASSEMBLIES WERE PRODUCED WITH INSUFFICIENT ADHESION BETWEEN THE POWER MODULE (CIRCUIT BOARD) AND THE RECTIFIER CASE THAT CONTAINS A HEAT SINK TO DISSIPATE HEAT. DUE TO INSUFFICIENT ADHESION, HEAT GENERATED ON THE POWER MODULE CIRCUIT BOARD CAN CAUSE THE CIRCUIT BOARD TO DEFORM, AND LIFT OF THE CASE. Remedy: SUZUKI WILL NOTIFY OWNERS AND SUZUKI DISTRIBUTORS WILL REPLACE THE REGULATOR/RECTIFIER WITH AN IMPROVED PART FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 2, 2011. OWNERS MAY CONTACT SUZUKI AT 1-714-572-1490.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain motorcycles, the regulator/rectifier assembly may have been produced with insufficient adhesion between the power module (circuit board) and the rectifier case. Due to this insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform. This could cause excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the vehicle's battery. Battery discharge could lead to engine stalling and/or a no-start condition. Lost propulsion, in conjunction with traffic and road conditions, and the rider's reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the regulator/rectifier assembly. Note: This recall may supersede recall 2011-071 for certain model motorcycles, which will require re-inspection and repair.
On certain motorcycles, improper routing of the wiring harness can cause the harness to flex rather than slide when the handlebar is moved. Repeated side-to-side movement of the handlebar, and flexing of the wiring harness, can eventually cause damage to the ignition switch lead wires. This could result in intermittent or complete loss of electrical power, which can cause a loss of lighting and/or stalling of the engine. Unexpected loss of lighting and/or engine stalling could, under certain conditions, cause a vehicle crash resulting in personal injury or death. Correction: Dealers will replace the lower portion of the ignition switch (which contains the ignition switch lead wires) and ensure that the harness is routed properly.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain