Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2009 Mack CXU, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Mack Trucks, Inc. (Mack) notified the agency on February 20, 2014, that they are recalling certain model year 2010-2012 CHU, CXU, GU and TD vehicles manufactured from June 16, 2009, through July 8, 2011. While continuing to research the scope of the issue, Mack expanded the recall on November 18, 2014 to include certain model year 2008-2009 and 2013-2014 CHU, CXU, GU and TD vehicles manufactured from June 16, 2009, through July 8, 2011. Having completed its investigation, Mack once again expanded the recall during February 2015 to include an additional 53,780 vehicles from model years 2007 and 2015. The recall now covers model year 2007-2015 includes CHU, CXU, GU and TD vehicles produced October 13, 2006, through October 3, 2014. In the affected vehicles, the Electronic Power Distribution Module (EPDM) may be contaminated from water leaks in, and around, the windshield. If exposed to water leaks, contaminants such as road salts may deposit on the EPDM. Remedy: Mack has notified owners, and dealers will inspect the EPDM. If contamination has occurred, dealers will replace the EPDM and address the leak, free of charge. Owners of model year 2010-2012 CHU, CXU, GU and TD vehicles were initially notified April 24, 2014. Owners affected by the recall expansions were notified in February 2015. Owners may contact Mack Trucks at 1-336-393-2000. Mack's number for this recall is SC0375.
MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2008-2011 CHU AND CXU HEAVY TRUCKS MANUFACTURED FROM JANUARY 2008 THROUGH JULY 2010. THERE MAY BE AN INTERFERENCE WITH THE BOLTS USED TO SECURE THE FIFTH WHEEL TO THE FRAME THAT CAN PREVENT THE BOLTS FROM BEING TORQUED TO SPECIFICATION. Remedy: DEALERS WILL INSPECT AND REPLACE THE BOLTS AS REQUIRED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 30, 2011. OWNERS MAY CONTACT MACK TRUCKS AT 1-800-866-1177.
Mack is recalling certain model year 2007-2010 CHU and CXU vehicles, manufactured from October 13, 2006, through December 23, 2009 and equipped with daytime running lights and fog lights. A short in the fog light circuit may cause the low beam headlight circuit to cut out. Remedy: Mack will notify owners, and install an additional wiring harness on the affected vehicles, free of charge. The safety recall began on November 14, 2012. Owners may contact Mack Trucks at 1-800-866-1177.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain model vehicles, water around the windshield can migrate into the Electronic Power Distribution Module and contaminate it. As a result, circuits may be bridged creating an electrical short. This could potentially result in a fire, increasing the risk of injury and/or damage to property. Correction: Dealers will inspect the module, and if found contaminated, will replace it. Additional measures will be taken to address the leak if contamination is found. Note: This is an expansion of recall 2014-053.
On certain trucks, an electrical short circuit in the fog light circuitry could result in a loss of low beam headlamp function. Loss of headlamp illumination, should it occur during a rainy/snowy day, or during hours of darkness, could compromise the driver’s ability to see the road and its users, which could result in a crash causing property damage and/or personal injury. Correction: Dealers will add an extra wiring harness between the cab harness and the Daytime Running Lamp (DRL) module, in order to isolate the fog light circuit.
On certain trucks, the bolts used to secure the fifth wheel hitch assembly to the frame may not have received adequate tightening torque during vehicle assembly. This could allow the mounting bolts to fail and the fifth wheel assembly, as well as the trailer, to separate from the tractor. A towed unit separating from the towing vehicle could strike another vehicle, stationary object, or bystander, causing property damage and/or personal injury. Correction: Dealers will inspect the mounting bolts and replace as required.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain