Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2009 Nissan Murano, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Nissan of North America, Inc (Nissan) is recalling certain 2009 Murano vehicles. The valves within the ABS Hydraulic Control Units (HCU) may react with brake fluids containing specific corrosion preventative additives. This reaction may cause the valves to not close properly. Remedy: Nissan has notified owners, and dealers will flush the brake system with DOT 4 fluid. The HCU will then be tested to detect a possible stuck valve condition. If necessary, the HCU will be replaced, free of charge. The recall began February 7, 2019. Owners may contact Nissan customer service at 1-800-867-7669.
NISSAN IS RECALLING 16,365 MY 2008 INFINITI EX35 AND MY 2009 NISSAN MURANO VEHICLES. DUE TO INCORRECT SOFTWARE PROGRAMMING, THE AIR BAG CONTROL UNIT (ACU) MAY CAUSE THE PASSENGER AIR BAG NOT TO OPERATE AS DESIGNED IF THE VEHICLE BATTERY BECOMES SIGNIFICANTLY DISCHARGED. Remedy: DEALERS WILL REPROGRAM THE ACU IN AFFECTED VEHICLES. THE RECALL BEGAN ON FEBRUARY 19, 2008. OWNERS MAY CONTACT INFINITI AT 1-800-662-6200 OR NISSAN AT 1-800-647-7261.
NISSAN IS RECALLING 204,361 MY 2007-2008 ALTIMA, ALTIMA HYBRID, 350Z, 350Z ROADSTER, MY 2008 ALTIMA COUPE, ROGUE, MY 2009 MURANO, AND INFINITI MY 2007-2008 G35 SEDAN, MY 2008 G37 COUPE AND EX35 PASSENGER VEHICLES EQUIPPED WITH CONTINENTAL AUTOMOTIVE SYSTEMS' OCCUPANT CLASSIFICATION SYSTEM (OCS) CONTROL UNITS. A VARISTOR IN THE OCS CONTROL UNIT LOCATED IN THE PASSENGER SEAT CUSHION MAY HAVE BEEN MANUFACTURED OUT OF SPECIFICATION. UNDER CERTAIN CONDITIONS, THIS COULD CAUSE AN INTERRUPTION OF SIGNAL BETWEEN THE OCS AND THE AIR BAG CONTROL UNIT (ACU). Remedy: DEALERS WILL TEST THE SIGNAL BETWEEN THE OCS AND ACU SYSTEMS USING A SPECIAL TOOL TO CHECK THAT IT IS FUNCTIONING AS DESIGNED. IF NECESSARY, THE SEAT CUSHION (CONTAINING OCS HARDWARE) WILL BE REPLACED WITH A NEW ONE MANUFACTURED TO SPECIFICATION. THE RECALL BEGAN ON NOVEMBER 4, 2008. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261 OR INFINITI AT 1-800-662-6200.
NISSAN IS RECALLING CERTAIN MODEL YEAR 2008-2010 VEHICLES ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, DELAWARE, IOWA, ILLINOIS, INDIANA, MASSACHUSETTS, MAINE, MARYLAND, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WASHINGTON D.C., WEST VIRGINIA AND WISCONSIN. THE MATERIAL IN THE NUT USED TO SECURE THE SENSOR-TRANSMITTER OF THE TIRE PRESSURE MONITORING SYSTEM (TPMS) MAY CORRODE AND POTENTIALLY CRACK IN AREAS WITH HEAVY CONCENTRATIONS OF ROAD SALT. IF THIS OCCURS, THE NUT MAY COME OUT OF THE SENSOR-TRANSMITTER AND THE TPMS LAMP WILL ILLUMINATE. Remedy: THE DEALER WILL REPLACE THE TPMS NUT WITH A NEW, MORE ROBUST NUT. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN ON OR BEFORE NOVEMBER 9, 2009. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261 AND INFINITI AT 1-800-662-6200.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain vehicles, the brake Hydraulic Control Unit (HCU) may become contaminated by a reaction between brake fluid and internal anti-corrosion coatings. This could cause an internal control valve to stick open, potentially increasing brake pedal travel and/or stopping distances. This may create an increased risk of a crash causing injury and/or damage to property. Correction: Dealers will flush the brake system with DOT 4 brake fluid. The HCU will then be tested to detect a possible stuck valve condition. If necessary, HCU will be replaced.
On certain vehicles, the filament in the bulb of the Daytime Running Lamps (DRL) may burn out due to a shorter lifespan than expected. A loss of DRL illumination could render the vehicle less visible to other motorists and to pedestrians during daylight hours, possibly resulting in a crash causing property damage and/or personal injury. Correction: Dealers will replace the Daytime Running Lamp bulbs with a longer life type bulb.
On certain vehicles, material in the nut used to secure the sensor-transmitter of the Tire Pressure Monitoring System (TPMS) may corrode and crack in areas with heavy concentrations of road salt. If this occurs, the nut may come out of the TPMS sensor-transmitter causing a rapid loss of tire air pressure. This could adversely affect vehicle control and cause a crash resulting in property damage, personal injury or death. Correction: Dealers will replace the TPMS nut with a revised version.
On certain vehicles, a varistor in the Occupant Classification System (OCS) control unit located in the passenger seat cushion may have been manufactured incorrectly. Under certain conditions, this could cause an interruption of signal between the OCS and the Airbag control unit (ACU). This could result in the passenger airbag being suppressed. The (red) supplemental airbag warning light would flash & the (amber) front passenger airbag status light would illuminate to alert the vehicle operator, however in case of a crash a suppressed airbag could result in personal injury or death. Correction: Dealers will test the signal between the OCS & ACU and if necessary will replace the seat cushion containing OCS hardware.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
If the vehicle battery becomes significantly discharged and the voltage in the electrical system drops (because, for example, the ignition is left in the "ON" position for a significant length of time without the engine running), the Airbag Control unit (ACU) is designed to suppress the passenger airbag and illuminate the passenger airbag status light. When the battery recharges and correct voltage is restored, the ACU is designed to reactivate the passenger airbag system. On certain vehicles, incorrect software programming may not allow the ACU to reactivate the airbag as intended. This can result in the passenger airbag being suppressed without lighting the warning indicator and the airbag status light. Failure of the airbag to inflate during a crash could increase the passenger seat occupant's risk of injury. Correction: Dealers will reprogram the ACU.