Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2010 Chevrolet Malibu, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
General Motors LLC (GM) is recalling certain 2010-2011 Chevrolet Malibu vehicles. In the event of a crash necessitating deployment of the driver frontal air bag, the air bag inflator may explode due to being overpressurized. Remedy: GM has notified owners, and dealers will replace the front driver air bag module, free of charge. The recall began February 25, 2019. Owners may contact GM customer service at 1-800-522-9559. GM's number for this recall is N182206630.
General Motors LLC (GM) is recalling certain model year 2004-2012 Chevrolet Malibu vehicles manufactured May 16, 2003, through October 11, 2012, 2004-2007 Malibu Maxx vehicles manufactured June 25, 2003, through April 5, 2007, 2005-2010 Pontiac G6 vehicles manufactured May 26, 2004, through January 4, 2010, and 2007-2010 Saturn Aura vehicles manufactured April 24, 2006, through May 26, 2009. In the affected vehicles, increased resistance in the Body Control Module (BCM) connection may result in voltage fluctuations in the Brake Apply Sensor (BAS) circuit. These fluctuations can cause one or more of these conditions: the brake lights to illuminate without the brake pedal being pushed; the brake lights to not illuminate when the pedal is pushed; difficulty disengaging the cruise control; moving the gear shifter out of the 'PARK' position without pushing the brake; and disablement of crash avoidance features such as traction control, electronic stability control, and panic braking assist features. Remedy: GM will notify owners, and dealers will attach the wiring harness to the BCM with a spacer, apply dielectric lubricant to both the BCM and harness connector and the BAS and harness connector, and will relearn the brake pedal home position, free of charge. The manufacturer distributed an Interim letter to customers on July 14, 2014. The recall began on August 18, 2014. Owners may contact General Motors customer service at 1-800-222-1020 (Chevrolet), 1-800-762-2737 (Pontiac), 1-800-553-6000 (Saturn). GM's number for this recall is 13036.
Dorman Products, Inc. (Dorman) is recalling certain replacement intermediate steering shafts sold under the Dorman, OE Solutions, and Solutions brand names, part numbers 425-167, 2425167, and 7-3074, for installation on 2004-2012 Chevrolet Malibu, 2005-2010 Pontiac G6, and 2007-2009 Saturn Aura vehicles. The affected steering shafts may have a yoke that inadequately supports the u-joint bearing resulting in a premature failure. Remedy: Dorman will notify owners, and dealers will refund the purchase price or replace the steering shafts, free of charge. The recall began in September 2014. Owners may contact Dorman customer service at 1-800-523-2492.
General Motors (GM) is recalling certain model year 2007-2010 Saturn Aura and model year 2008-2010 Chevrolet Malibu and Pontiac G6 vehicles, equipped with a 4-speed automatic transmission. On these vehicles, the tabs on the transmission shift cable end may fracture and separate. Remedy: GM will notify owners, and dealers will install a retainer over the cable end or replace the shift cable as necessary. This service will be performed free of charge. Notification to owners began on on November 9, 2012. Owners were instructed to not bring their vehicles for repair until January 2013. Owners may contact General Motors at 1-800-521-7300.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain vehicles, the driver-front airbag inflator could produce excessive internal pressure during an airbag deployment. If the driver-front airbag inflator ruptures during deployment, the airbag may not fully inflate, and the release of high-pressured gas may propel pieces of the inflator and airbag module into the occupant compartment. This could create or increase the risk of injury to occupant(s) in a crash. Correction: Dealers will replace the driver-front airbag module.
On certain vehicles, intermittent electrical connection faults may cause the brake lamps to illuminate without the brake pedal being depressed, or not illuminate when the brake pedal is depressed. This could also interfere with cruise control, ABS and/or vehicle stability control function. Failure of the brake lights to illuminate when the brake pedal is depressed or erratic brake lamp function could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will affect repairs.
On certain vehicles equipped with automatic transmissions, shift cable locking tabs could fracture without warning. If this occurs, the transmission may not be in the PARK position and may not match the gear position indicated by the shift lever. The driver would be able to remove the key from the ignition, but the door locks may not unlock automatically and the PARK indicator lamp would not be illuminated. The driver may not be able to restart the vehicle and the vehicle could roll away after the driver has exited the vehicle, resulting in a possible crash which may cause property damage or personal injury. Correction: Dealers will install a shift cable retainer clip, or replaced the shift cable, as necessary.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard 102 - Transmission Control Functions. The indicator light of the PRNDM provided to identify the transmission shift position is not activated under certain circumstances when the ignition key cylinder is in a zone between the ignition “OFF” detent and the accessory “ACC” detent when the engine is off. This condition can occur if the vehicle operator rotates the key cylinder toward the “OFF” detent while the engine is running and the shift lever is in a position other than “PARK”. This will result in the key cylinder hitting a stop which prevents it from being fully turned to the “OFF” detent position. At this key position, electrical power has been disconnected from the shift lever position indication light because the key cylinder has been rotated beyond “ACC” detent and the electrical switch contacts have opened. If this sequence of operator actions were to occur, the shift lever position indication light would not be illuminated and the vehicle transmission would not be in “PARK”. If this condition were present, the key cannot be removed from the vehicle because the transmission is not placed into “PARK”. If the operator exited the vehicle in the condition described above (leaving the key in the ignition), an audible warning to the driver would activate whenever the driver's door is unlocked and opened. Correction: A production change has been undertaken to remedy the technical non-compliance. No corrective recall action is required as the technical non-compliance is deemed to be non-safety related.