Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2010 GMC Acadia, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
General Motors is recalling certain model year 2009-2014 Buick Enclave vehicles manufactured April 14, 2008, through May 14, 2014, Chevrolet Traverse vehicles manufactured June 6, 2008, through May 14, 2014, and GMC Acadia vehicles manufactured April 9, 2008, through May 14, 2014, and 2009-2010 Saturn Outlook vehicles manufactured April 14, 2008, through March 18, 2010. In the affected vehicles, the flexible steel cable that connects the seatbelt to the front outboard seating positions may fatigue and separate over time. Remedy: General Motors will notify owners, and dealers will inspect and, if necessary, repair and replace the lap pretensioner, free of charge. Parts are not currently available. An interim notice will be mailed to owners in July 2014. A second notice will be mailed to owners once parts become available. The recall for the 2009-2010 model years began on July 11, 2014. The interim letter for the 2011-2014 model years were distributed on July 11, 2014. Owners may contact General Motors at 1-800-222-1020 (Chevrolet), 1-800-521-7300 (Buick), 1-800-462-8782 (GMC), 1-800-553-6000 (Saturn). General Motors recall number for this campaign is 14187.
General Motors LLC (GM) is recalling certain model year 2008-2013 Buick Enclave and GMC Acadia and 2009-2013 Chevrolet Traverse and 2008-2010 Saturn Outlook vehicles. In the affected vehicles, increased resistance in the driver and passenger seat mounted side impact air bag (SIAB) wiring harnesses may result in the SIAB and seat belt pretensioners not deploying in the event of a crash. Remedy: GM will notify owners, and dealers will replace the affected harness connections with soldered connections, free of charge. The recall began on June 16, 2014. Buick owners may contact the owner center at 1-800-521-7300, Chevrolet owners at 1-866-694-6546, Saturn at 1-800-553-6000, and GMC owners at 1-866-996-9463. GM's number for this recall is 14030. Note: Vehicles repaired as part of Customer Satisfaction Campaign 10085 and special coverage 10335 have already had the subject condition repaired and therefore are not included in the safety recall.
General Motors LLC (GM) is recalling certain model year 2008-2012 Buick Enclave vehicles manufactured January 3, 2007, to February 29, 2012, 2009-2012 Chevrolet Traverse vehicles manufactured July 6, 2008, to March 9, 2012, 2007-2012 GMC Acadia vehicles manufactured September 15, 2006, to February 29, 2012, and 2007-2010 Saturn Outlook vehicles manufactured August 17, 2006, to March 18, 2010. The affected vehicles, equipped with the power liftgate option, have gas struts that hold the power liftgate up when open. These struts may prematurely wear and the open liftgate may suddenly fall. Remedy: GM will notify owners, and dealers will update the software for the power liftgate actuator motor control unit so that the motor will prevent the rapid closing of the lift gate, free of charge. The recall began on November 15, 2016. Owners may contact Buick customer service at 1-800-521-7300, Chevrolet customer service at 1-800-222-1020, GMC customer service at 1-800-462-8782, and Saturn customer service at 1-800-553-6000. GM's number for this recall is 15240.
GENERAL MOTORS IS RECALLING CERTAIN MODEL YEAR 2009-2010 CHEVROLET TRAVERSE, BUICK ENCLAVE, GMC ACADIA, AND SATURN OUTLOOK VEHICLES. THE SECOND ROW SEAT SIDE TRIM SHIELD RESTRICTS THE UPWARD ROTATION OF THE SAFETY BELT BUCKLE WHEN THE SEAT BACK IS RETURNED TO A SEATING POSITION AFTER BEING FOLDED FLAT. IF THE BUCKLE CONTACTS THE SEAT FRAME, ADDITIONAL EFFORT IS REQUIRED TO RETURN THE SEAT TO A SEATING POSITION. IF SUFFICIENT FORCE IS APPLIED, THE BUCKLE COVER COULD BE PUSHED DOWN THE STRAP, EXPOSING AND PARTIALLY DEPRESSING THE RED RELEASE BUTTON. Remedy: DEALERS WILL MODIFY THE SECOND ROW SEAT SIDE TRIM SHIELDS. IF A SAFETY BELT BUCKLE IS DAMAGED, DEALERS WILL REPLACE IT FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 18, 2010. OWNERS MAY CONTACT CHEVROLET AT 1-800-630-2438, BUICK AT 1-866-608-8080, GMC AT 1-866-996-9463, AND SATURN AT 1-800-972-8876, OR AT THE OWNER CENTER AT WWW.GMOWNERCENTER.COM.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
On certain vehicles equipped with a power liftgate system, the gas-filled struts (which help to raise and support the liftgate) may prematurely wear. These vehicles have a Prop Rod Recovery system intended to accomplish a controlled, slow return of the liftgate to the closed position if the liftgate’s gas struts are no longer capable of supporting the weight of the liftgate. The vehicle would provide audible warnings and flash the tail lamps to indicate there is a problem. However, the liftgate’s Prop Rod Recovery system software may be unable to detect/stop a liftgate with prematurely worn gas struts from falling too quickly after the liftgate is opened. This could allow the liftgate to drop suddenly, placing anyone beneath or near the gate at risk of injury. Correction: Dealers will reprogram the power liftgate actuator motor ECU with a new software and will verify power liftgate operation following the reprogram.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, the flexible steel cable that connects the seat belt to the vehicle structure at the front outboard seating positions can fatigue over time and could separate, increasing the risk of injury in a crash. Correction: Dealers will inspect and repair or replace the lap pretensioner, as necessary.
On certain vehicles, side airbag wiring connections could develop high resistance, illuminating the airbag warning light. If the vehicle continues to be operated in this condition, resistance may continue to increase over time and eventually cause the seat side airbags and seat belt pretensioners to not deploy in the event of a crash, which could increase the risk of injury. Correction: Dealers will affect repairs.
On certain vehicles, the second row seat side trim shield may restrict the upward rotation of the safety belt buckle when the seat back is returned to a seating position after being folded flat. If the buckle contacts the seat frame, additional effort is required to return the seat to a seating position. If sufficient force is applied, the buckle cover could be pushed down the strap, exposing and partially depressing the red release button. As a result, the release button will not travel as much as designed when depressed and will appear to be jammed. The buckle cover may have visible damage which may only be cosmetic, but in some cases, the buckle may not latch/unlatch, or may appear to latch when the latch mechanism is not fully engaged. If the latch mechanism is not fully engaged, the safety belt may not restrain the occupant as intended in a crash, which could result in personal injury or death. Correction: Dealers will modify the second row seat side trim shields, inspect the belt buckle and will replace it if damaged.