Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2010 Kia Sedona, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Kia Motors America (Kia) is recalling certain 2006-2010 Sedona and 2007-2009 Sorento vehicles. Moisture may enter the Anti-lock Brake (ABS) Module and result in an electrical short. Remedy: Kia will notify owners, and dealers will install a relay in the main junction box to prevent power from being directed to the HECU when the vehicle's ignition switch is turned off, free of charge. The recall began June 5, 2020. Owners may contact Kia customer service at 1-800-333-4542. Kia's number for this recall is SC186.
Kia Motors Corporation (Kia) is recalling certain model year 2006-2012 Kia Sedona vehicles manufactured from June 15, 2005, through August 14, 2012 and originally sold in, or currently registered in Alaska, Connecticut, Delaware, Illinois, Indiana, Iowa, Kansas, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, Nebraska, New Hampshire, New Jersey, New York, North Dakota, Ohio, Pennsylvania, Rhode Island, South Dakota, Utah, Vermont, West Virginia, Wisconsin and the District of Columbia. In the affected vehicles, the front lower control arms may break due to corrosion from salt water exposure such as from road salt use. Remedy: Kia will notify owners and dealers will replace the front lower control arms on 2006-2007 models. 2008-2012 models will either have their front lower control arms replaced or additional anti-corrosion coating will be applied. These repairs will be performed free of charge. The recall began on July 27, 2016. Owners may contact Kia at 1-800-333-4542. Kia's number for this recall is SC133.
Kia Motors Corporation (Kia) is recalling certain model year 2007-2010 Rondo, model year 2007-2011 Sedona, Sorento and Sportage, model year 2010-2011 Soul, model year 2008-2011 Optima, model year 2010 Forte, model year 2007-2009 Amanti, and model year 2009 Borrego vehicles. Originally, in April 2013, Kia recalled 623,658 model year 2007-2010 Rondo and Sportage, model year 2007-2011 Sorento, model year 2007 Sedona, model year 2010-2011 Soul, and model year 2011 Optima vehicles. In September 2013, Kia informed the agency that it was adding an additional 356,719 vehicles to this campaign. The total number of vehicles being recalled is now 980,377. In the affected vehicles, the stop lamp switch may malfunction. A malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal is depressed or may cause an inability to deactivate the cruise control by depressing the brake pedal. Additionally, a malfunctioning stop lamp switch may also result in intermittent operation of the push-button start feature, affect the operation of the brake-transmission shift interlock feature preventing the shifter from being moved out of the PARK position and cause the Electronic Stability Control (ESC) malfunction light to illuminate. Remedy: Kia will send an interim notification to owners in May 2013. When parts are available, owners will receive a second notification and dealers will replace the stop lamp switch, free of charge. Owners may contact Kia at 1-800-333-4542. Kia's recall campaign number is SC098.
Kia Motors Corporation (Kia) is recalling certain model year 2006-2014 Kia Sedona vehicles manufactured from June 15, 2005, through April 04, 2014. In the affected vehicles, the secondary hood latch may bind and remain in the unlatched position when the hood is closed. Remedy: Kia will notify owners and dealers will replace the secondary hood latch or clean and lubricate the latch, depending on the vehicle's location and the condition of the latch. These repairs will be performed free of charge. The recall began on July 27, 2016. Owners may contact Kia at 1-800-333-4542. Kia's recall number is SC134.
Kia Motors Corporation (Kia) is recalling certain model year 2006-2012 Kia Sedona vehicles manufactured from June 15, 2005, through August 14, 2012 originally sold in, or currently registered in Massachusetts, Maryland, Michigan, New Hampshire, New York, Pennsylvania, Vermont, Wisconsin, Connecticut, Delaware, Iowa, Illinois, Indiana, Maine, Minnesota, Missouri, New Jersey, Ohio, Rhode Island, West Virginia or the District of Columbia. In the affected vehicles, the front lower control arms may break due to corrosion resulting from prolonged exposure to salty environments. Remedy: Kia will notify owners and dealers will inspect the degree of corrosion of the front lower control arms, and will either rustproof or replace them, free of charge. The recall began on December 20, 2013. Owners may contact Kia at 1-800-333-4542. Kia's recall number is SC100.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain vehicles, the compliance label may be missing information in French. The words listed on the label for "Tires", "Rims", "Front" and "Rear" appear in English only, when they should be listed as "Tires/Pneus", "Rims/Jantes", "Front/Avant" and "Rear/Arriere". Canadian regulations require this information to be listed on the label in both English and French. Safety Risk: These small errors do not affect vehicle safety. Corrective Actions: This is not a recall. Kia has corrected the compliance label for all new vehicles.
Issue: On certain vehicles, moisture can enter the brake Hydraulic Electronic Control Unit (HECU) and cause a short circuit. Safety Risk: A short circuit could create a fire risk. This can happen even if the vehicle is parked. Corrective Actions: Kia will notify owners by mail and instruct you to take your vehicle to a dealer to install a relay to power off the HECU when the vehicle is turned off. Kia recommends that you should park your vehicle outdoors, and away from other vehicles or structures until the recall repairs have been completed.
On certain gasoline and hybrid engine vehicles, the circuits within the airbag control unit may become damaged. This could cause the airbags and seat belt pretensioners to not deploy in certain collisions where deployment is warranted, which could increase the risk of injury to vehicle occupants. Correction: Dealers will install a wire harness kit between the ACU connector and vehicle harness connector as necessary. Note: This recall does not affect the 2013 model year Optima Hybrid.
On certain vehicles, road salt can corrode the front control arms, which may ultimately lead to control arm failure. This could result in a loss of vehicle control, increasing the risk of a crash causing injury and/or property damage. Correction: For 2006-2007 model year vehicles, dealers will replace the front lower control arms if they were not previously replaced under recall 2013-388. For 2008-2012 model year vehicles, dealers will inspect the control arms and either apply an anticorrosion treatment or replace the control arms, as necessary. Note: This recall supersedes recall 2013-388.
We checked the EU Safety Gate for recall alerts naming this model and its production years.
Source: EU Safety Gate (European Commission) · CC BY 4.0, © European Union
Production: Vehicles produced from 15 June 2005 to 4 April 2014..
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, the secondary hood latch could corrode, and may result in the mechanical binding of the latch. This could cause the secondary hood latch to remain in the open position when the hood is closed. If the vehicle were to be driven with the primary hood latch disengaged, there is a potential that the secondary hood latch may not hold the hood closed as designed while the vehicle is in motion. If this were to occur, it could compromise the driver’s ability to see the road and its users, as well as cause damage to the windshield. These issues could result in a crash causing injury and/or property damage. Correction: Dealers will replace the secondary latch with an improved secondary latch with an enhanced corrosion coating.
On certain vehicles, road salt can corrode the front control arms, which may ultimately lead to control arm failure. This could result in a loss of vehicle control, increasing the risk of a crash causing injury and/or property damage. Correction: Dealers will inspect the control arms and either apply an anticorrosion treatment or replace control arms, as necessary.
On certain vehicles, the stop lamp switch may fail and cause intermittent operation of the brake lights. Failure of the brake lights to illuminate when the brake pedal is depressed could result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the switch. Note: This is an expansion of recall 2013-098.