Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2010 Volkswagen Jetta, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Tenneco Automotive (Tenneco) is recalling certain Beck/Arnley Master Cylinders, part number 072-9831, sold as aftermarket or replacement parts for 2004-2018 Volkswagen Jetta, and 2012-2019 Volkswagen Beetle vehicles. The fluid seal crimp on the master cylinder may be insufficient, causing brake fluid to leak or the cylinder to come apart. Remedy: Beck/Arnley will notify the distributors that sold the master cylinders and will work with the distributors to notify the end users. Affected master cylinders will be exchanged for a new master cylinder (part number 072-9990), free of charge. The recall began October 30, 2020. Owners may contact Tenneco customer service at 1-800-625-9319.
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain model year 2009-2010 Volkswagen Jetta A5 Sedan, 2009 Volkswagen Jetta SportWagen, Eos, GTI, Rabbit and Audi A3 vehicles, and 2010 Volkswagen Golf A6 vehicles. The Antilock Brake System (ABS) control unit may fail during ABS or Electronic Stability Control (ESC) activation, possibly causing a loss of vehicle control. Remedy: Volkswagen will notify owners, and dealers will update the ABS control module software to improve the module's self-testing abilities. Any module that fails the new diagnostic test will be replaced. These repairs will be made free of charge. The recall began February 2017. Owners may contact Volkswagen customer service at 1-800-893-5298.
VOLKSWAGEN IS RECALLING CERTAIN MODEL 2009-2012 JETTA AND JETTA SPORTWAGEN VEHICLES, MANUFACTURED FROM MAY 2008 THROUGH SEPTEMBER 2011, MODEL YEAR 2010-2012 VOLKSWAGEN GOLF VEHICLES, MANUFACTURED FROM MAY 2009 THROUGH SEPTEMBER 2011, AND MODEL YEAR 2010-2012 AUDI A3 VEHICLES, MANUFACTURED FROM SEPTEMBER 2009 THROUGH SEPTEMBER 2011, THAT ARE EQUIPPED WITH A 2.0L TDI COMMON RAIL DIESEL ENGINE/CLEAN DIESEL ENGINE. THE FUEL INJECTION PULSES COULD COINCIDE WITH THE NATURAL FREQUENCY OF THE INJECTOR LINE #2, IN SPECIFIC LOAD AND RPM CONDITIONS. THIS RESONANCE CREATES ADDITIONAL STRESS IN THE FUEL LINE. Remedy: VOLKSWAGEN WILL INSTALL AN IMPROVED FUEL INJECTOR LINE FOR THE NUMBER 2 CYLINDER ON CERTAIN VEHICLES AND WILL INSTALL VIBRATION DAMPERS ON ALL OF THE INJECTOR LINES. VOLKSWAGEN AND AUDI WILL NOTIFY OWNERS TO HAVE THE VEHICLES REPAIRED FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING NOVEMBER 2011. OWNERS MAY CONTACT VOLKSWAGEN AT 1-800-822-8987.
VOLKSWAGEN IS RECALLING CERTAIN MODEL YEAR 2006-2010 JETTA, NEW BEETLE, NEW BEETLE CONVERTIBLE, MODEL YEAR 2009 JETTA SPORTWAGEN AND MODEL YEAR 2007-2009 RABBIT VEHICLES EQUIPPED WITH 2.5L ENGINES. THE JETTA, JETTA SPORTWAGEN, AND RABBIT VEHICLES MAY HAVE A SMALL PLASTIC TAB LOCATED ON THE WINDSHIELD WASHER FLUID RESERVOIR THAT MAY CHAFE AGAINST AN UNDERHOOD FUEL SUPPLY LINE. THE NEW BEETLE AND THE NEW BEETLE CONVERTIBLE VEHICLES MAY HAVE A FASTENING CLAMP ON A HYDRAULIC HOSE OF THE POWER STEERING SYSTEM THAT MAY BE LOCATED IN AN IMPROPER POSITION WHICH COULD CAUSE CHAFING AGAINST AN UNDERHOOD FUEL SUPPLY LINE. Remedy: DEALERS WILL INSPECT AND IF NECESSARY REPLACE THE UNDERHOOD FUEL LINE. ADDITIONALLY, DEPENDING ON THE VEHICLE MODEL, DEALERS WILL EITHER REMOVE THE PLASTIC TAB FROM THE WINDSHIELD WASHER FLUID RESERVOIR, OR INSPECT THE POSITION OF THE FASTENING CLAMP AND ADJUST THE RELATED FASTENING CLAMP INTO THE CORRECT POSITION. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE JANUARY 31, 2011. OWNERS MAY CONTACT VOLKSWAGEN AT 1-800-822-8987.
VOLKSWAGEN IS RECALLING CERTAIN MODEL YEAR 2009 AND 2010 PASSENGER CARS MANUFACTURED BETWEEN SEPTEMBER 2008 AND AUGUST 2009. THE WIRING HARNESS OF A TEMPERATURE SENSOR IN THE DIRECT SHIFT GEARBOX (DSG) MAY HAVE CONNECTOR WIRES THAT WERE INSUFFICIENTLY CRIMPED. WITH INSUFFICIENTLY CRIMPED CONNECTOR WIRES, A TEMPERATURE SENSOR HAS THE POTENTIAL TO FALSELY DETECT A HIGH GEARBOX OIL TEMPERATURE, CAUSING THE TRANSMISSION TO ABRUPTLY SHIFT TO NEUTRAL. IF THIS HAPPENS, THE SELECTOR LEVER POSITION INDICATOR WITHIN THE INSTRUMENT PANEL WILL FLASH. IN ADDITION, THE "DEPRESS BRAKE PEDAL" INDICATOR LIGHT WILL BE ILLUMINATED, ALERTING THE DRIVER TO APPLY THE BRAKES. Remedy: VOLKSWAGEN WILL REPROGRAM THE TRANSMISSION CONTROL MODULE WITH UPDATED SOFTWARE FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 20, 2009. OWNERS MAY CONTACT VOLKSWAGEN AT 1-800-822-8987.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain vehicles, the warning label for the engine block heater cable is written in English only. As a result, a French user may not receive important safety information about how to use the engine block heater. A label that is not provided in both official languages could create confusion. Safety Risk: User confusion could increase the risk of injury when trying to use the block heater. Corrective Actions: The company will mail each owner a new label for the block heater cable. If you would like help installing the label, you can contact a dealer for assistance.
On certain vehicles, the steering wheel clock spring could become contaminated with long hair or long fibers which may cause a displacement of the internal guide loops. When the guide loops are dragged out of position, they may apply tension to the internal flat cable and cause it to tear. Should the cable tear, the electrical connection to the driver's front airbag may be lost, causing the airbag monitoring indicator light to illuminate. Failure of the driver's airbag to deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will install a cover of a different design to help prevent clock spring contamination caused by hair or other fibers. In instances where the vehicle has an airbag light on (and diagnosis confirms the steering wheel clock spring requires replacement), dealers will install a new steering wheel clock spring.
On certain vehicles, a fuse can overheat and damage the fuse box, causing a partial loss of exterior vehicle lighting. This could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will install a fuse of an updated design.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles equipped with a 2.0L TDI diesel engine, the fuel injection lines could crack. Diesel fuel leakage may ignite on a hot engine surface and cause a fire, which could result in property damage and/or personal injury. Correction: Dealers will install vibration dampers on all four fuel injection lines. Additionally, on some vehicles (depending on the date of manufacture) the #2 fuel injection line will be replaced.
On certain Golf, Golf wagon, Jetta and Rabbit equipped with a 2.5L Engine, a small plastic tab located on the windshield washer fluid reservoir may chafe against an underhood fuel supply line. If chafing occurs fuel leakage could develop which, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will inspect the affected vehicles and, if necessary, replace the fuel line. In addition, as a preventive measure, the plastic tab from the windshield washer fluid reservoir will be removed.
On certain Audi A3, TT, TT Roadster, and Volkswagen EOS, Golf wagon, GTI, Jetta and Jetta wagon equipped with a Direct-Shift Gearbox (DSG), the wiring harness of a temperature sensor in the DSG may have connector wires that were insufficiently crimped during assembly. As such, the temperature sensor could falsely detect a high gearbox oil temperature, causing the transmission to abruptly shift to the Neutral position. A loss of propulsion, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash causing personal injury or death. Correction: Dealers will reprogram the transmission control module with updated software..